- Latest available (Revised)
- Point in Time (20/02/2008)
- Original (As adopted by EU)
Regulation (EC) No 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 91/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC (Text with EEA relevance) (repealed)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 14/12/2009
Point in time view as at 20/02/2008.
There are currently no known outstanding effects for the Regulation (EC) No 216/2008 of the European Parliament and of the Council (repealed), CHAPTER I.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.This Regulation shall apply to:
(a)the design, production, maintenance and operation of aeronautical products, parts and appliances, as well as personnel and organisations involved in the design, production and maintenance of such products, parts and appliances;
(b)personnel and organisations involved in the operation of aircraft.
2.This Regulation shall not apply when products, parts, appliances, personnel and organisations referred to in paragraph 1 are engaged in military, customs, police, or similar services. The Member States shall undertake to ensure that such services have due regard as far as practicable to the objectives of this Regulation.
1.The principal objective of this Regulation is to establish and maintain a high uniform level of civil aviation safety in Europe.
2.Additional objectives are, in the fields covered by this Regulation, as follows:
(a)to ensure a high uniform level of environmental protection;
(b)to facilitate the free movement of goods, persons and services;
(c)to promote cost-efficiency in the regulatory and certification processes and to avoid duplication at national and European level;
(d)to assist Member States in fulfilling their obligations under the Chicago Convention, by providing a basis for a common interpretation and uniform implementation of its provisions, and by ensuring that its provisions are duly taken into account in this Regulation and in the rules drawn up for its implementation;
(e)to promote Community views regarding civil aviation safety standards and rules throughout the world by establishing appropriate cooperation with third countries and international organisations;
(f)to provide a level playing field for all actors in the internal aviation market.
3.The means of achieving the objectives set out in paragraphs 1 and 2 shall be:
(a)the preparation, adoption and uniform application of all necessary acts;
(b)the recognition, without additional requirements, of certificates, licences, approvals or other documents granted to products, personnel and organisations in accordance with this Regulation and its implementing rules;
(c)the establishment of an independent European Aviation Safety Agency (hereinafter referred to as the Agency);
(d)the uniform implementation of all necessary acts by the national aviation authorities and the Agency within their respective areas of responsibility.
For the purposes of this Regulation:
‘continuing oversight’ shall mean the tasks to be conducted to verify that the conditions under which a certificate has been granted continue to be fulfilled at any time during its period of validity, as well as the taking of any safeguard measure;
‘Chicago Convention’ shall mean the Convention on International Civil Aviation and its Annexes, signed in Chicago on 7 December 1944;
‘product’ shall mean an aircraft, engine or propeller;
‘parts and appliances’ shall mean any instrument, equipment, mechanism, part, apparatus, appurtenance or accessory, including communications equipment, that is used or intended to be used in operating or controlling an aircraft in flight and is installed in or attached to the aircraft. It shall include parts of an airframe, engine or propeller;
‘certification’ shall mean any form of recognition that a product, part or appliance, organisation or person complies with the applicable requirements including the provisions of this Regulation and its implementing rules, as well as the issuance of the relevant certificate attesting such compliance;
‘qualified entity’ shall mean a body which may be allocated a specific certification task by, and under the control and the responsibility of, the Agency or a national aviation authority;
‘certificate’ shall mean any approval, licence or other document issued as the result of certification;
‘operator’ shall mean any legal or natural person, operating or proposing to operate one or more aircraft;
‘commercial operation’ shall mean any operation of an aircraft, in return for remuneration or other valuable consideration, which is available to the public or, when not made available to the public, which is performed under a contract between an operator and a customer, where the latter has no control over the operator;
‘complex motor-powered aircraft’ shall mean:
an aeroplane:
with a maximum certificated take-off mass exceeding 5 700 kg, or
certificated for a maximum passenger seating configuration of more than nineteen, or
certificated for operation with a minimum crew of at least two pilots, or
equipped with (a) turbojet engine(s) or more than one turboprop engine, or
a helicopter certificated:
for a maximum take-off mass exceeding 3 175 kg, or
for a maximum passenger seating configuration of more than nine, or
for operation with a minimum crew of at least two pilots, or
a tilt rotor aircraft;
‘flight simulation training device’ shall mean any type of device in which flight conditions are simulated on the ground; they include flight simulators, flight training devices, flight and navigation procedures trainers and basic instrument training devices;
‘rating’ shall mean a statement entered on a licence, setting forth privileges, special conditions or limitations pertaining thereto.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: