ANNEX XBInstructions for filling the format set out in Annex XA

FILL IN AS MUCH INFORMATION AS POSSIBLE

1.

Vessel name, call sign, flag and if possible registration and Lloyd IMO number are to be obtained from what is seen on the vessel or from radio contact with the vessels (the source of this information must be reported).

2.

Distinguishing markings: state whether the name and port of registration of the vessel was visible or not. Record hull and superstructure colours, number of masts, position of bridge and funnel length, etc.

3.

Type of vessel: describe the type of vessel and gear sighted (e.g. longliner, trawler, factory ship, carrier ship).

4.

Position: record the initial sighting of the vessel, including fishing area/subarea/division.

5.

Activity of the sighted vessel: record the time of the sighting, activity of the vessel at that time and heading (degrees). Record whether the vessel was fishing, setting fishing gear, trawling, hauling or other activities. Space is available for up to five sightings of the same vessel, if more space is needed complete this section on the back of the form or on a separate sheet of paper. Record presence/absence of a streamer line.

6.

Record of sighting: indicate if the sighting of the vessel was recorded on video or with photographs (record where documents have been deposited under comments).

7.

Comments: indicate the direction in which the vessel was transiting. Summarise any radio conversation that took place with indication of the name, nationality, position given by the person(s) contacted on board of the sighted vessel.

8.

Diagram of vessel: draw the profile of the vessel, indicating any distinguishing markings that could be used for identification.