Regulation (EC) No 1222/2009 of the European Parliament and of the CouncilShow full title

Regulation (EC) No 1222/2009 of the European Parliament and of the Council of 25 November 2009 on the labelling of tyres with respect to fuel efficiency and other essential parameters (Text with EEA relevance)

[F12. DEFINITIONS U.K.

For the purposes of testing wet grip of C1 tyres, the following definitions apply:

(1)

test run means a single pass of a loaded tyre over a given test track surface;

(2)

test tyre(s) means a candidate tyre, a reference tyre or a control tyre or tyre set that is used in a test run;

(3)

candidate tyre(s) (T) means a tyre or a tyre set that is tested for the purpose of calculating its wet grip index;

(4)

reference tyre(s) (R) means a tyre or a tyre set that has the characteristics indicated in ASTM F 2493-08 and referred to as Standard Reference Test Tyre 16 inches (SRTT16″);

(5)

control tyre(s) (C) means an intermediate tyre or a set of intermediate tyres which is used when the candidate tyre and the reference tyre cannot be directly compared on the same vehicle;

(6)

braking force of a tyre means the longitudinal force, expressed in newton, resulting from braking torque application;

(7)

braking force coefficient of a tyre (BFC) means the ratio of the braking force to the vertical load;

(8)

peak braking force coefficient of a tyre means the maximum value of a tyre braking force coefficient that occurs prior to wheel lockup as the braking torque is progressively increased;

(9)

lockup of a wheel means the condition of a wheel in which its rotational velocity about the wheel spin axis is zero and it is prevented from rotating in the presence of applied wheel torque;

(10)

vertical load means the load in newton imposed on the tyre perpendicular to the road surface;

(11)

tyre test vehicle means a dedicated special purpose vehicle which has instruments to measure the vertical and the longitudinal forces on one test tyre during braking.]