ANNEX ICEREALS

PART VIStandard method of testing for moisture content

1.Principle

The product is dried at a temperature of 130 to 133 oC under normal atmospheric pressure, for a period appropriate to the size of the particles.

2.Scope

This drying method applies to cereals crushed into particles of which at least 50 % pass through a sieve with 0,5 mm mesh and leave not more than 10 % residue on the sieve with a 1,0 mm round mesh. It also applies to flour.

3.Apparatus

Precision balance.

Crusher made of a material which does not absorb moisture, is easy to clean, enables crushing to be effected quickly and evenly without overheating, limits contact with the outside air to the minimum, and meets the requirements mentioned in point 2 (for example a detachable roller mill).

Receptacle made of non-corrodible metal or glass, fitted with a sufficiently tight-fitting lid; working surface allowing distribution of the test sample at 0,3 g per cm2.

Electrically heated isothermic heating chamber, set at a temperature of 130 to 133 oC(1) having adequate ventilation(2).

Dessicator with a metal or, failing metal, porcelain plate (thick, perforated), containing any suitable dessicant.

4.Procedure

Drying

Weigh to the nearest 1 mg a quantity slightly greater than 5 g of the crushed small-grained cereals or 8 g of the crushed maize in the pre-weighed receptacle. Place the receptacle in a heating chamber heated to a temperature of 130 to 133 oC. This should be done as quickly as possible, so as to prevent too great a drop in temperature. Leave small-grained cereals to dry for two hours and maize for four hours after the heating chamber regains a temperature of 130 to 133 oC. Remove the receptacle from the heating chamber, quickly replace the lid, leave to cool for 30 to 45 minutes in a dessicator and weigh (to the nearest 1 mg).