This Regulation establishes ecodesign requirements for the placing on the market of non-directional household lamps, including when they are marketed for non-household use or when they are integrated into other products. It also establishes product information requirements for special purpose lamps.

The requirements set out in this Regulation shall not apply to the following household and special purpose lamps:

1. (a)

   lamps having the following chromaticity coordinates x and y:

   • x < 0,200 or x > 0,600

   • y < – 2,3172 x² + 2,3653 x – 0,2800 or

     y > – 2,3172 x² + 2,3653 x – 0,1000;

2. (b)

   directional lamps;

3. (c)

   lamps having a luminous flux below 60 lumens or above 12 000 lumens;

4. (d)

   lamps having:

   • 6 % or more of total radiation of the range 250-780 nm in the range of 250-400 nm,

   • the peak of the radiation between 315-400 nm (UVA) or 280-315 nm (UVB);

5. (e)

   fluorescent lamps without integrated ballast;

6. (f)

   high-intensity discharge lamps;

7. (g)

   incandescent lamps with E14/E27/B22/B15 caps, with a voltage equal to or below 60 volts and without integrated transformer in Stages 1-5 according to Article 3.

For the purposes of this Regulation, the definitions set out in Directive 2005/32/EC shall apply. The following definitions shall also apply:

1. 1.

   ‘household room illumination’ means the full or partial illumination of a household room, by replacing or complementing natural light with artificial light, in order to enhance visibility within that space;

2. 2.

   ‘lamp’ means a source made in order to produce an optical radiation, usually visible, including any additional components necessary for starting, power supply or stable operation of the lamp or for the distribution, filtering or transformation of the optical radiation, in case those components cannot be removed without permanently damaging the unit;

3. 3.

   ‘household lamp’ means a lamp intended for household room illumination; it does not include special purpose lamps;

4. 4.

   ‘special purpose lamp’ means a lamp not intended for household room illumination because of its technical parameters or because the related product information indicates that it is unsuitable for household room illumination;

5. 5.

   ‘directional lamp’ means a lamp having at least 80 % light output within a solid angle of π sr (corresponding to a cone with angle of 120°);

6. 6.

   ‘non-directional lamp’ means a lamp that is not a directional lamp;

7. 7.

   ‘filament lamp’ means a lamp in which light is produced by means of a threadlike conductor which is heated to incandescence by the passage of an electric current. The lamp may or may not contain gases influencing the process of incandescence;

8. 8.

   ‘incandescent lamp’ means a filament lamp in which the filament operates in an evacuated bulb or is surrounded by inert gas;

9. 9.

   ‘tungsten halogen lamp’ means a filament lamp in which the filament is made of tungsten and is surrounded by gas containing halogens or halogen compounds. Tungsten halogen lamps are supplied either with or without integrated power supply;

10. 10.

    ‘discharge lamp’ means a lamp in which the light is produced, directly or indirectly, by an electric discharge through a gas, a metal vapour or a mixture of several gases and vapours;

11. 11.

    ‘fluorescent lamp’ means a discharge lamp of the low pressure mercury type in which most of the light is emitted by one or several layers of phosphors excited by the ultraviolet radiation from the discharge. Fluorescent lamps are supplied either with or without integrated ballasts;

12. 12.

    ‘ballast’ means a device which serves to limit the current of the lamp(s) to the required value in case it is connected between the supply and one or more discharge lamps. It may also include means for transforming the supply voltage, dimming the lamp, correcting the power factor and, either alone or in combination with a starting device, providing the necessary conditions for starting the lamp(s). It can be integrated or external to the lamp;

13. 13.

    ‘power supply’ means a device which is designed to convert alternating current (AC) power input from the mains power source input into direct current (DC) or another AC output;

14. 14.

    ‘compact fluorescent lamp’ means a unit which cannot be dismantled without being permanently damaged, provided with a lamp cap and incorporating a fluorescent lamp and any additional components necessary for starting and stable operation of the lamp;

15. 15.

    ‘fluorescent lamp without integrated ballast’ means a single and double capped fluorescent lamp without integrated ballast;

16. 16.

    ‘high intensity discharge lamp’ means an electric discharge lamp in which the light producing arc is stabilized by wall temperature and the arc has a bulb wall loading in excess of 3 watts per square centimetre;

17. 17.

    ‘light emitting diode’ or ‘LED’ means a solid state device embodying a p-n junction, emitting optical radiation when excited by an electric current;

18. 18.

    ‘LED lamp’ means a lamp incorporating one or several LED.

For the purposes of Annexes II to IV, the definitions set out in Annex I shall also apply.

When performing the market surveillance checks referred to in Article 3(2) of Directive 2005/32/EC, the authorities of the Member States shall apply the verification procedure described in Annex III to this Regulation for the requirements set out in Annex II to this Regulation.

The indicative benchmarks for best-performing products and technology available on the market at the time of adopting this Regulation are identified in Annex IV.

The Commission shall review this Regulation in light of technological progress no later than five years after the entry into force and present the result of this review to the Consultation Forum.

This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.