- Latest available (Revised)
- Point in Time (13/07/2023)
- Original (As adopted by EU)
Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (Recast)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 01/04/2024
Point in time view as at 13/07/2023.
There are currently no known outstanding effects for the Council Regulation (EC) No 428/2009, CATEGORY 7 – NAVIGATION AND AVIONICS.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
NB: For automatic pilots for underwater vehicles, see Category 8.
For radar, see Category 6.
NB:
SEE ALSO 7A101.
NB:
For angular or rotational accelerometers, see 7A001.b.
Linear accelerometers having any of the following:
Specified to function at linear acceleration levels less than or equal to 15 g and having any of the following:
A "bias""stability" of less (better) than 130 micro g with respect to a fixed calibration value over a period of one year; or
A "scale factor""stability" of less (better) than 130 ppm with respect to a fixed calibration value over a period of one year;
Specified to function at linear acceleration levels exceeding 15 g but less than or equal to 100 g and having all of the following:
A "bias""repeatability" of less (better) than 1 250 micro g over a period of one year; and
A "scale factor""repeatability" of less (better) than 1 250 ppm over a period of one year; or
Designed for use in inertial navigation or guidance systems and specified to function at linear acceleration levels exceeding 100 g;
Note:
7A001.a.1. and 7A001.a.2. do not control accelerometers limited to measurement of only vibration or shock.
Angular or rotational accelerometers, specified to function at linear acceleration levels exceeding 100 g.
NB:
SEE ALSO 7A102.
NB:
For angular or rotational accelerometers, see 7A001.b.
Specified to function at linear acceleration levels less than or equal to 100 g and having any of the following:
An angular rate range of less than 500 degrees per second and having any of the following:
A "bias""stability" of less (better) than 0,5 degree per hour, when measured in a 1 g environment over a period of one month, and with respect to a fixed calibration value; or
An "angle random walk" of less (better) than or equal to 0,0035 degree per square root hour; or
Note:
7A002.a.1.b. does not control "spinning mass gyros".
An angular rate range greater than or equal to 500 degrees per second and having any of the following:
A "bias""stability" of less (better) than 4 degrees per hour, when measured in a 1 g environment over a period of three minutes, and with respect to a fixed calibration value; or
An "angle random walk" of less (better) than or equal to 0,1 degree per square root hour; or
Note:
7A002.a.2.b. does not control "spinning mass gyros".
Specified to function at linear acceleration levels exceeding 100 g.
NB: SEE ALSO 7A103.
F2...
Textual Amendments
F2Words in Annex 1 Entry 7A003 omitted (13.7.2023) by virtue of The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(i)
[F3 Note:]
7A003 does not control ‘inertial measurement equipment or systems’ which are certified for use on "civil aircraft" by civil aviation authorities of one or more F4... Wassenaar Arrangement Participating States.
Textual Amendments
F3Word in Annex 1 Entry 7A003 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(ii)
F4Words in Annex 1 Entry 7A003 omitted (31.12.2020) by virtue of The Trade etc. in Dual-Use Items and Firearms etc. (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/771), regs. 1, 3(22)(g) (with reg. 5) (as amended by S.I. 2020/1502, regs. 2(3), 10); 2020 c. 1, Sch. 5 para. 1(1)
[F5Technical Notes
1.For the purposes of 7A003., ‘Inertial measurement equipment or systems’ incorporate accelerometers or gyroscopes to measure changes in velocity and orientation in order to determine or maintain heading or position without requiring an external reference once aligned. ‘Inertial measurement equipment or systems’ include:
-Attitude and Heading Reference Systems (AHRSs);
-Gyrocompasses;
-Inertial Measurement Units (IMUs);
-Inertial Navigation Systems (INSs);
-Inertial Reference Systems (IRSs);
-Inertial Reference Units (IRUs).
2.For the purposes of 7A003, ‘positional aiding references’ independently provide position, and include:
a.“Satellite navigation system”;
b.“Data-Based Referenced Navigation” (“DBRN”).
c.Designed for “aircraft”, land vehicles or vessels, providing position without the use of ‘positional aiding references’, and having any of the following “accuracies” subsequent to normal alignment:
1.0,8 nautical miles per hour (nm/hr) “Circular Error Probable” (“CEP”) rate or less (better);
2.0,5 % distanced travelled “CEP” or less (better); or
3.Total drift of 1 nautical mile “CEP” or less (better) in a 24 hr period;]
Textual Amendments
F5Words in Annex 1 Entry 7A003 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(iii)
Designed for "aircraft", land vehicles or vessels, providing position without the use of ‘positional aiding references’, and having any of the following "accuracies" subsequent to normal alignment:
0,8 nautical miles per hour (nm/hr) "Circular Error Probable" ("CEP") rate or less (better);
0,5 % distanced travelled "CEP" or less (better); or
Total drift of 1 nautical mile "CEP" or less (better) in a 24 hr period;
Technical Note:
[F6For the purposes of 7A003.a.1., 7A003.a.2. and 7A003.a.3., the performance parameters] typically apply to ‘inertial measurement equipment or systems’ designed for "aircraft", vehicles and vessels, respectively. These parameters result from the utilisation of specialised [F7non-‘positional aiding references’] (e.g., altimeter, odometer, velocity log). As a consequence, the specified performance values cannot be readily converted between these parameters. Equipment designed for multiple platforms are evaluated against each applicable entry 7A003.a.1., 7A003.a.2., or 7A003.a.3.
Designed for "aircraft", land vehicles or vessels, with an embedded ‘positional aiding reference’ and providing position after loss of all ‘positional aiding references’ for a period of up to 4 minutes, having an "accuracy" of less (better) than 10 meters "CEP";
Technical Note:
[F8For the purposes of 7A003.b., this entry] refers to systems in which ‘inertial measurement equipment or systems’ and other independent ‘positional aiding references’ are built into a single unit (i.e., embedded) in order to achieve improved performance.
Designed for "aircraft", land vehicles or vessels, providing heading or True North determination and having any of the following:
A maximum operating angular rate less (lower) than 500 deg/s and a heading "accuracy" without the use of ‘positional aiding references’ equal to or less (better) than 0,07 deg sec(Lat) (equivalent to 6 arc minutes rms at 45 degrees latitude); or
A maximum operating angular rate equal to or greater (higher) than 500 deg/s and a heading "accuracy" without the use of ‘positional aiding references’ equal to or less (better) than 0,2 deg sec(Lat) (equivalent to 17 arc minutes rms at 45 degrees latitude); or
Providing acceleration measurements or angular rate measurements, in more than one dimension, and having any of the following:
Performance specified in 7A001 or 7A002 along any axis, without the use of any aiding references; or
Being "space-qualified" and providing angular rate measurements having an "angle random walk" along any axis of less (better) than or equal to 0,1 degree per square root hour.
Note:
7A003.d.2. does not control ‘inertial measurement equipment or systems’ that contain "spinning mass gyros" as the only type of gyro.
Textual Amendments
F6Words in Annex 1 Entry 7A003.a substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(iv)(aa)
F7Words in Annex 1 Entry 7A003.a substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(iv)(bb)
F8Words in Annex 1 Entry 7A003.b substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(v)
NB:
SEE ALSO 7A104.
‘Star trackers’ with a specified azimuth "accuracy" of equal to or less (better) than 20 seconds of arc throughout the specified lifetime of the equipment;
Components specially designed for equipment specified in 7A004.a. as follows:
Optical heads or baffles;
Data processing units.
Technical Note:
[F9For the purposes of 7A004.a., ‘star] trackers’ are also referred to as stellar attitude sensors or gyro-astro compasses.
Textual Amendments
F9Words in Annex 1 Entry 7A004 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(vi)
NB:
SEE ALSO 7A105.
NB:
For equipment specially designed for military use, SEE MILITARY GOODS CONTROLS.
Employing a decryption algorithm specially designed or modified for government use to access the ranging code for position and time; or
Employing ‘adaptive antenna systems’.
Note:
7A005.b. does not control "satellite navigation system" receiving equipment that only uses components designed to filter, switch, or combine signals from multiple omni-directional antennae that do not implement adaptive antenna techniques.
Technical Note:
For the purposes of [F107A005.b.,] ‘adaptive antenna systems’ dynamically generate one or more spatial nulls in an antenna array pattern by [F11‘signal processing’] in the time domain or frequency domain.
Textual Amendments
F10Word in Annex 1 Entry 7A005.b substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(vii)(aa)
F11Words in Annex 1 Entry 7A005.b substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(vii)(bb)
NB:
SEE ALSO 7A106.
‘Power management’; or
Using phase shift key modulation.
Technical Note:
[F12For the purposes of 7A006.a., ‘power] management’ is changing the transmitted power of the altimeter signal so that received power at the "aircraft" altitude is always at the minimum necessary to determine the altitude.
Textual Amendments
F12Words in Annex 1 Entry 7A006 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(viii)
Note:
7A008 does not control systems specially designed for installation on surface vessels or systems requiring acoustic beacons or buoys to provide positioning data.
NB:
See 6A001.a. for acoustic systems, and 6A001.b. for correlation-velocity and Doppler-velocity sonar log equipment.
See 8A002 for other marine systems.
A "bias""repeatability" of less (better) than 1 250 micro g; and
A "scale factor""repeatability" of less (better) than 1 250 ppm;
Note:
7A101 does not control accelerometers specially designed and developed as Measurement While Drilling (MWD) Sensors for use in downhole well service operations.
Technical Notes:
1.
In 7A101 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km;
2.
In 7A101 the measurement of "bias" and "scale factor" refers to one sigma standard deviation with respect to a fixed calibration over a period of one year;
Technical Notes:
1.
In 7A102 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
2.
In 7A102 ‘stability’ is defined as a measure of the ability of a specific mechanism or performance coefficient to remain invariant when continuously exposed to a fixed operating condition (IEEE STD 528-2001 paragraph 2.247).
‘Inertial measurement equipment or systems’, using accelerometers or gyros as follows:
Accelerometers specified in 7A001.a.3., 7A001.b. or 7A101 or gyros specified in 7A002 or 7A102; or
Note:
7A103.a.1. does not control equipment containing accelerometers specified in 7A001.a.3. that are designed to measure vibration or shock.
Accelerometers specified in 7A001.a.1. or 7A001.a.2., designed for use in inertial navigation systems or in guidance systems of all types, and usable in ‘missiles’;
Note:
7A103.a.2. does not control equipment containing accelerometers specified in 7A001.a.1. or 7A001.a.2. where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations
Technical Note:
‘Inertial measurement equipment or systems’ specified in 7A103.a. incorporate accelerometers or gyros to measure changes in velocity and orientation in order to determine or maintain heading or position without requiring an external reference once aligned.
Note:
‘Inertial measurement equipment or systems’ in 7A103.a. include:
Attitude and Heading Reference Systems (AHRSs);
Gyrocompasses;
Inertial Measurement Units (IMUs);
Inertial Navigation Systems (INSs);
Inertial Reference Systems (IRSs);
Inertial Reference Units (IRUs).
Integrated flight instrument systems which include gyrostabilisers or automatic pilots, designed or modified for use in ‘missiles’;
‘Integrated navigation systems’, designed or modified for ‘missiles’ and capable of providing a navigational accuracy of 200 m ‘CEP’ or less;
Technical Notes:
1.
An ‘integrated navigation system’ typically incorporates the following components:
An inertial measurement device (e.g., an attitude and heading reference system, inertial reference unit, or inertial navigation system);
One or more external sensors used to update the position and/or velocity, either periodically or continuously throughout the flight (e.g., satellite navigation receiver, radar altimeter, and/or Doppler radar); and
Integration hardware and software;
In 7A103.c. ‘CEP’ (Circular Error Probable or Circle of Equal Probability) is a measure of accuracy, defined as the radius of the circle inside of which there is a 50 % probability of being located.
Three axis magnetic heading sensors, designed or modified to be integrated with flight control and navigation systems, other than those specified in 6A006, having all of the following characteristics, and specially designed components therefor:
Internal tilt compensation in pitch (± 90 degrees) and roll (± 180 degrees) axes; and
Azimuthal accuracy better (less) than 0,5 degrees rms at latitude of ± 80 degrees, reference to local magnetic field.
Note:
Flight control and navigation systems in 7A103.d. include gyrostabilizers, automatic pilots and inertial navigation systems.
Technical Note:
In 7A103 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
Designed or modified for use in space launch vehicles specified in 9A004, sounding rockets specified in 9A104 or unmanned aerial vehicles specified in 9A012 or 9A112.a.; or
Designed or modified for airborne applications and having any of the following:
Capable of providing navigation information at speeds in excess of 600 m/s;
Employing decryption, designed or modified for military or governmental services, to gain access to a ‘navigation satellite system’ secured signal/data; or
Being specially designed to employ anti-jam features (e.g., null steering antenna or electronically steerable antenna) to function in an environment of active or passive countermeasures.
Note:
7A105.b.2. and 7A105.b.3. do not control equipment designed for commercial, civil or ‘Safety of Life’ (e.g., data integrity, flight safety) ‘navigation satellite system’ services.
Technical Note:
In 7A105, ‘navigation satellite system’ includes Global Navigation Satellite Systems (GNSS; e.g., GPS, GLONASS, Galileo or BeiDou) and Regional Navigation Satellite Systems (RNSS; e.g., NavIC, QZSS).
Note:
Equipment specified in 7A105, 7A106, and 7A115 includes the following:
Terrain contour mapping equipment;
Scene mapping and correlation (both digital and analogue) equipment;
Doppler navigation radar equipment;
Passive interferometer equipment;
Imaging sensor equipment (both active and passive).
Pneumatic, hydraulic, mechanical, electro-optical, or electro-mechanical flight control systems (including fly-by-wire and fly-by-light systems);
Attitude control equipment;
Flight control servo valves designed or modified for the systems specified in 7A116.a. or 7A116.b., and designed or modified to operate in a vibration environment greater than 10 g rms between 20 Hz and 2 kHz.
Note:
For conversion of manned aircraft to operate as "missiles", 7A116 includes the systems,equipment and valves designed or modified to enable operation of manned aircraft as unmanned aerial vehicles.
Technical Note:
In 7A117 ‘CEP’ (Circular Error Probable or Circle of Equal Probability) is a measure of accuracy, defined as the radius of the circle centred at the target, at a specific range, in which 50 % of the payloads impact.
Note:
7B001 does not control test, calibration or alignment equipment for ‘Maintenance Level I’ or ‘Maintenance Level II’.
Technical Notes:
[F13For the purposes of 7B001:]
1. ‘Maintenance Level I’
The failure of an inertial navigation unit is detected on the "aircraft" by indications from the Control and Display Unit (CDU) or by the status message from the corresponding sub-system. By following the manufacturer’s manual, the cause of the failure may be localised at the level of the malfunctioning Line Replaceable Unit (LRU). The operator then removes the LRU and replaces it with a spare.
2. ‘Maintenance Level II’
The defective LRU is sent to the maintenance workshop (the manufacturer’s or that of the operator responsible for level II maintenance). At the maintenance workshop, the malfunctioning LRU is tested by various appropriate means to verify and localise the defective Shop Replaceable Assembly (SRA) module responsible for the failure. This SRA is removed and replaced by an operative spare. The defective SRA (or possibly the complete LRU) is then shipped to the manufacturer. ‘Maintenance Level II’ does not include the disassembly or repair of controlled accelerometers or gyro sensors.
Textual Amendments
F13Words in Annex 1 Entry 7B001 inserted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(ix)
NB:
SEE ALSO 7B102.
Scatterometers having a measurement "accuracy" of 10 ppm or less (better);
Profilometers having a measurement "accuracy" of 0,5 nm (5 angstrom) or less (better).
Note:
7B003 includes:
Gyro tuning test stations;
Gyro dynamic balance stations;
Gyro run-in/motor test stations;
Gyro evacuation and fill stations;
Centrifuge fixtures for gyro bearings;
Accelerometer axis align stations;
Fibre optic gyro coil winding machines.
"Production facilities" specially designed for equipment specified in 7A117;
"Production equipment", and other test, calibration and alignment equipment, other than that specified in 7B001 to 7B003, designed or modified to be used with equipment specified in 7A.
None.
Note:
7D002 does not control "source code" for the "use" of gimballed ‘AHRS’.
Technical Note:
[F14For the purposes of 7D002,] ‘AHRS’ generally differ from Inertial Navigation Systems (INS) in that an ‘AHRS’ provides attitude and heading information and normally does not provide the acceleration, velocity and position information associated with an INS.
Textual Amendments
F14Words in Annex 1 Entry 7D002 inserted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(x)
"Software" specially designed or modified to improve the operational performance or reduce the navigational error of systems to the levels specified in 7A003, 7A004 or 7A008;
"Source code" for hybrid integrated systems which improves the operational performance or reduces the navigational error of systems to the level specified in 7A003 or 7A008 by continuously combining heading data with any of the following:
Doppler radar or sonar velocity data;
"Satellite navigation system" reference data; or
Data from "Data-Based Referenced Navigation" ("DBRN") systems;
Not used;
Not used;
Computer-Aided-Design (CAD) "software" specially designed for the "development" of "active flight control systems", helicopter multi-axis fly-by-wire or fly-by-light controllers or helicopter "[F15circulation-controlled] anti-torque or circulation-controlled direction control systems", whose "technology" is specified in 7E004.b.1., 7E004.b.3. to 7E004.b.5., 7E004.b.7., 7E004.b.8., 7E004.c.1. or 7E004.c.2.
Textual Amendments
F15Words in Annex 1 Entry 7D003.e substituted (31.3.2023) by The Export Control (Military and Dual-Use Lists) (Amendment) Regulations 2023 (S.I. 2023/302), regs. 1, 5(2)(h)(i)
Digital flight management systems for "total control of flight";
Integrated propulsion and flight control systems;
"Fly-by-wire systems" or "fly-by-light systems";
Fault-tolerant or self-reconfiguring "active flight control systems";
Not used;
Air data systems based on surface static data; or
Three dimensional displays.
Note:
7D004. does not control "source code" associated with common computer elements and utilities (e.g., input signal acquisition, output signal transmission, computer [F16‘program’] and data loading, built-in test, task scheduling mechanisms) not providing a specific flight control system function.
Textual Amendments
F16Word in Annex 1 Entry 7D004 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xi)
Integration "software" for the equipment specified in 7A103.b.;
Integration "software" specially designed for the equipment specified in 7A003 or 7A103.a.;
Integration "software" designed or modified for the equipment specified in 7A103.c.
Note:
A common form of integration "software" employs Kalman filtering.
Note:
"Software" specified in 7D103 remains controlled when combined with specially designed hardware specified in 4A102.
Note:
7D104 includes ‘software’, specially designed or modified to enhance the performance of ‘guidance sets’ to achieve or exceed the accuracy specified in 7A117.
Note:
7E001 includes key management "technology" exclusively for equipment specified in 7A005.a.
Note:
7E003 does not control "technology" for maintenance, directly associated with calibration, removal or replacement of damaged or unserviceable LRUs and SRAs of a "civil aircraft" as described in ‘Maintenance Level I’ or ‘Maintenance Level II’.
NB:
See Technical Notes to 7B001.
"Technology" for the "development" or "production" of any of the following:
Not used;
Air data systems based on surface static data only, i.e., which dispense with conventional air data probes;
Three dimensional displays for "aircraft";
Not used;
Electric actuators (i.e., electromechanical, electrohydrostatic and integrated actuator package) specially designed for ‘primary flight control’;
Technical Note:
[F17For the purposes of 7E004.a.5., ‘primary] flight control’ is "aircraft" stability or manoeuvring control using force/moment generators, i.e. aerodynamic control surfaces or propulsive thrust vectoring.
‘Flight control optical sensor array’ specially designed for implementing "active flight control systems"; or
Technical Note:
[F18For the purposes of 7E004.a.6., a ‘flight] control optical sensor array’ is a network of distributed optical sensors, using "laser" beams, to provide real-time flight control data for on-board processing.
"DBRN" systems designed to navigate underwater, using sonar or gravity databases, that provide a positioning "accuracy" equal to or less (better) than 0,4 nautical miles;
"Development""technology", as follows, for "active flight control systems" (including "fly-by-wire systems" or "fly-by-light systems"):
Photonic-based "technology" for sensing "aircraft" or flight control component state, transferring flight control data, or commanding actuator movement, "required" for "fly-by-light systems""active flight control systems";
Not used;
Real-time algorithms to analyse component sensor information to predict and preemptively mitigate impending degradation and failures of components within an "active flight control system";
Note:
7E004.b.3. does not control algorithms for purpose of off-line maintenance.
Real-time algorithms to identify component failures and reconfigure force and moment controls to mitigate "active flight control system" degradations and failures;
Note:
7E004.b.4. does not control algorithms for the elimination of fault effects through comparison of redundant data sources, or off-line pre-planned responses to anticipated failures.
Integration of digital flight control, navigation and propulsion control data, into a digital flight management system for "total control of flight";
Note:
7E004.b.5. does not control:
"Technology" for integration of digital flight control, navigation and propulsion control data, into a digital flight management system for ‘flight path optimisation’;
"Technology" for "aircraft" flight instrument systems integrated solely for VOR, DME, ILS or MLS navigation or approaches.
Technical Note:
‘Flight path optimisation’ is a procedure that minimises deviations from a four-dimensional (space and time) desired trajectory based on maximising performance or effectiveness for mission tasks.
Not used;
"Technology""required" for deriving the functional requirements for "fly-by-wire systems" having all of the following:
‘Inner-loop’ airframe stability controls requiring loop closure rates of 40 Hz or greater; and
Technical Note:
[F19For the purposes of 7E004.b.7.a., ‘inner-loop’] refers to functions of "active flight control systems" that automate airframe stability controls.
Having any of the following:
Corrects an aerodynamically unstable airframe, measured at any point in the design flight envelope, that would lose recoverable control if not corrected within 0,5 seconds;
Couples controls in two or more axes while compensating for ‘abnormal changes in aircraft state’;
Technical Note:
[F20For the purposes of 7E004.b.7.b.2., ‘abnormal] changes in aircraft state’ include in-flight structural damage, loss of engine thrust, disabled control surface, or destabilizing shifts in cargo load.
Performs the functions specified in 7E004.b.5.; or
Note:
7E004.b.7.b.3. does not control autopilots.
Enables "aircraft" to have stable controlled flight, other than during take-off or landing, at greater than 18 degrees angle of attack, 15 degrees side slip, 15 degrees/second pitch or yaw rate, or 90 degrees/second roll rate;
"Technology""required" for deriving the functional requirements for "fly-by-wire systems" to achieve all of the following:
No loss of control of the "aircraft" in the event of a consecutive sequence of any two individual faults within the "fly-by-wire system"; and
Probability of loss of control of the "aircraft" being less (better) than 1 × 10–9 failures per flight hour;
Note:
7E004.b. does not control "technology" associated with common computer elements and utilities (e.g., input signal acquisition, output signal transmission, computer [F21‘program’] and data loading, built-in test, task scheduling mechanisms) not providing a specific flight control system function.
"Technology" for the "development" of helicopter systems, as follows:
Multi-axis fly-by-wire or fly-by-light controllers, which combine the functions of at least two of the following into one controlling element:
Collective controls;
Cyclic controls;
Yaw controls;
"Circulation-controlled anti-torque or circulation-controlled direction control systems";
Rotor blades incorporating ‘variable geometry [F22aerofoils]’, for use in systems using individual blade control.
Technical Note:
[F23For the purposes of 7E004.c.3., ‘variable] geometry [F22aerofoils]’ use trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight.
Textual Amendments
F17Words in Annex 1 Entry 7E004.a.5 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xii)
F18Words in Annex 1 Entry 7E004.a.6 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xiii)
F19Words in Annex 1 Entry 7E004.b.7.a substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xiv)
F20Words in Annex 1 Entry 7E004.b.7.b.2 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xv)
F21Word in Annex 1 Entry 7E004.b substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xvi)
F22Word in Annex 1 Entry 7E004.c.3 substituted (31.3.2023) by The Export Control (Military and Dual-Use Lists) (Amendment) Regulations 2023 (S.I. 2023/302), regs. 1, 5(2)(h)(ii)
F23Words in Annex 1 Entry 7E004.c.3 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(j)(xvii)
Design "technology" for shielding systems;
Design "technology" for the configuration of hardened electrical circuits and subsystems;
Design "technology" for the determination of hardening criteria of 7E102.a. and 7E102.b.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: