Regulation (EC) No 596/2009 of the European Parliament and of the Council of 18 June 2009 adapting a number of instruments subject to the procedure referred to in Article 251 of the Treaty to Council Decision 1999/468/EC with regard to the regulatory procedure with scrutiny Adaptation to the regulatory procedure with scrutiny — Part Four
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Point in time view as at 18/06/2009.
Regulation (EC) No 596/2009 of the European Parliament and of the Council, Division 2.1. is up to date with all changes known to be in force on or before 08 March 2025. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
As regards Directive 96/59/EC, the Commission should be empowered in particular to fix the reference methods of measurement to determine the PCB content of contaminated materials and the technical standards for the other methods of disposing of PCBs, and, if necessary, to determine, solely for the purpose of Article 9(1)(b) and (c), other less hazardous substitutes for PCBs. Since those measures are of general scope and are designed to amend non-essential elements of Directive 96/59/EC by supplementing it with new non-essential elements, they must be adopted in accordance with the regulatory procedure with scrutiny provided for in Article 5a of Decision 1999/468/EC.
Accordingly, Directive 96/59/EC is hereby amended as follows:
Article 10 shall be replaced by the following:
1.The Commission shall make available, in accordance with the regulatory procedure referred to in Article 10a(2), a list of the production names of capacitors, resistors and inductance coils containing PCBs.
2.The Commission shall:
(a)fix the reference methods of measurement to determine the PCB content of contaminated materials. Measurements effected before the determination of the reference methods shall remain valid;
(b)if necessary determine, solely for the purpose of Article 9(1)(b) and (c), other less hazardous substitutes for PCBs.
The Commission may fix technical standards for the other methods of disposing of PCBs referred to in the second sentence of Article 8(2).
The measures referred to in the first and second subparagraphs, designed to amend non-essential elements of this Directive by supplementing it, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 10a(3).’;
the following Article shall be inserted:
1.The Commission shall be assisted by the Committee set up by Article 18 of Directive 2006/12/EC of the European Parliament and of the Council(2).
2.Where reference is made to this paragraph, Articles 5 and 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.
3.Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.’.
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.
