- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) No 1008/2010Show full title
Commission Regulation (EU) No 1008/2010 of 9 November 2010 concerning type-approval requirements for windscreen wiper and washer systems of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance)
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 01/07/20130.76 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: Division PART 2
Changes to legislation:
There are outstanding changes not yet made to Commission Regulation (EU) No 1008/2010. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Changes and effects yet to be applied to Annex II Part 2:
- Regulation words substituted by S.I. 2022/1273 reg. 60(2)(b)
- Annex 2 Pt. 2 word substituted by S.I. 2022/1273 reg. 60(10)(b)(ii)
- Annex 2 Pt. 2 words substituted by S.I. 2022/1273 reg. 60(10)(b)(i)
Changes and effects yet to be applied to the whole legislation item and associated provisions
- Signature words omitted by S.I. 2022/1273 reg. 60(8)
- Annex 1 Pt. 2 s. 1 point 000.4 note words substituted by S.I. 2022/1273 reg. 60(9)(b)(ii)
PART 2U.K. EC type-approval certificate
MODEL U.K.Format: A4 (210 × 297 mm)U.K.EC TYPE-APPROVAL CERTIFICATEU.K.
Stamp of type-approval authority
Communication concerning:
| a Delete where not applicable. | |
| of a type of windscreen washer system as a separate technical unit | |
| with regard to Regulation (EU) No 1008/2010, as last amended by Regulation (EU) No …/…a | |
| EC type-approval number: … | |
| Reason for extension: … | |
SECTION IU.K.
0.1.Make (trade name of manufacturer): …U.K.
0.2.Type: …U.K.
0.3.Means of identification of type, if marked on the separate technical unit(1): …U.K.
0.3.1.Location of that marking: …U.K.
0.5.Name and address of manufacturer: …U.K.
0.7.Location and method of affixing of the EC approval mark: …U.K.
0.8.Name(s) and address(es) of assembly plant(s): …U.K.
0.9.Name and address of the manufacturer's representative (if any): …U.K.
SECTION IIU.K.
1.Additional information: see Addendum.U.K.
2.Technical service responsible for carrying out the tests: …U.K.
3.Date of test report: …U.K.
4.Number of test report: …U.K.
5.Remarks (if any): see Addendum.U.K.
6.Place: …U.K.
7.Date: …U.K.
8.Signature: …U.K.
Attachments
:
Information package
Test report
AddendumU.K. to EC type-approval certificate No …
1.Additional information:
1.1.
Brief description of the type of separate technical unit: …
1.2.
Detailed description of the washer system:
1.2.1.
Number of nozzles: …
1.2.2.
Number of outlet ports per nozzle: …
1.2.3.
Description of washer line hoses and its mounting to pump and nozzles: …
1.2.4.
Description of washer pump: …
1.2.5.
Fluid storage capacity (litre): …
2.Suitable for hand of drive: left/right(2)
3.Any part of the system may be situated in the engine compartment: yes/no(2)
4.Separate technical unit: universal/vehicle specific(2)
5.Remarks: …
6.List of vehicle types for which the separate technical unit has been approved (if applicable): …
(1)
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
(2)
Delete as appropriate.
Options/Help
Print Options
PrintThe Whole Regulation
PrintThe Whole Annex
PrintThis Part only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.