Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.
Information document No … relating to the EC type-approval of a motor vehicle with regard to wheel guards.
The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units referred to in this information document have electronic controls, information concerning their performance shall be supplied.
Mass of the vehicle with bodywork and, in the case of a towing vehicle of category other than M1, with coupling device, if fitted by the manufacturer, in running order, or mass of the chassis or chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a crew seat in the vehicle)(8) (maximum and minimum for each variant): …
for tyres indicate size designation;
for wheels indicate rim size(s) and off-set(s)
etc.
Stamp of type-approval authority
Communication concerning:
a Delete where not applicable. | |
of a type of vehicle with regard to wheel guards | |
with regard to Regulation (EU) No 1009/2010 as last amended by Regulation (EU) No …/…a | |
EC type-approval number: … | |
Reason for extension: … |
:
Information package
Test report
Brief description of the vehicle type as regards its structure, dimensions, lines and constituent materials: …
Description of the wheel guards: …
Tyre/wheel combination(s) (including tyre size, rim size and wheel off-set): …
Description of the type of snow traction device(s) which may be used: …
Tyre/wheel combination(s) (including tyre size, rim size and wheel off-set) to be used with the snow traction device(s): …
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
Classified according to the definitions set out in Directive 2007/46/EC Part A of Annex II.
Where there is one version with a normal cab and another with a sleeper cab, both sets of masses and dimensions are to be stated.
Standard ISO 612: 1978 - Road vehicles - Dimensions of motor vehicles and towed vehicles - terms and definitions.
The mass of the driver and, if applicable, of the crew member is assessed at 75 kg (subdivided into 68 kg occupant mass and 7 kg luggage mass according to ISO Standard 2416 - 1992), the fuel tank is filled to 90 % and the other liquid containing systems (except those for used water) to 100 % of the capacity specified by the manufacturer.
Delete where not applicable.
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
As defined in Directive 2007/46/EC, Annex II, Section A.
Delete as appropriate.