Commission Regulation (EU) No 1009/2010Show full title

Commission Regulation (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance)

  1. Introductory Text

  2. Article 1.Scope

  3. Article 2.Definitions

  4. Article 3.Provisions for EC type-approval of a vehicle with regard to wheel guards

  5. Article 4.Validity and extension of approvals granted under Directive 78/549/EEC

  6. Article 5.Entry into force

  7. Signature

    1. ANNEX I

      Administrative documents for EC type-approval of motor vehicles with regard to wheel guards

      1. PART 1 Information document

        1. MODEL

          1. 0. GENERAL

            1. 0.1. Make (trade name of manufacturer): …

            2. 0.2. Type: …

              1. 0.2.1. Commercial name(s) (if available): …

            3. 0.3. Means of identification of type, if marked on the vehicle:...

              1. 0.3.1. Location of that marking: …

            4. 0.4. Category of vehicle: …

            5. 0.5. Name and address of manufacturer: …

            6. 0.8. Name(s) and address(es) of assembly plant(s): …

            7. 0.9. Name and address of the manufacturer's representative (if any): …...

          2. 1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

            1. 1.1. Photographs and/or drawings of a representative vehicle: …

            2. 1.3. Number of axles and wheels: …

              1. 1.3.1. Number and position of axles with twin wheels: …

              2. 1.3.2. Number and position of steered axles: …

              3. 1.3.3. Powered axles (number, position, interconnection): …

          3. 2. MASSES AND DIMENSIONS

            1. 2.3. Axle track(s) and width(s):

              1. 2.3.1. Track of each steered axle: …

              2. 2.3.2. Track of all other axles: …

              3. 2.3.3. Width of the widest rear axle: …

              4. 2.3.4. Width of the foremost axle (measured at the outermost part...

            2. 2.4. Range of vehicle dimensions (overall)

              1. 2.4.1. For chassis without bodywork

                1. 2.4.1.2. Width: …

                2. 2.4.1.3. Height (in running order) (for suspensions adjustable for height, indicate...

              2. 2.4.2. For chassis with bodywork

                1. 2.4.2.2. Width: …

                2. 2.4.2.3. Height (in running order) (for suspensions adjustable for height, indicate...

            3. 2.6. Mass in running order

          4. 6. SUSPENSION

            1. 6.2.1. Level adjustment: yes/no/optional

            2. 6.6. Tyres and wheels

              1. 6.6.1. Tyre/wheel combination(s)

                1. 6.6.1.1. Axles

                  1. 6.6.1.1.1. Axle 1: …

                  2. 6.6.1.1.2. Axle 2: …

              2. 6.6.4. Description of the snow traction device(s) and the tyre/wheel combination(s)...

          5. 9.16. Wheel guards

            1. 9.16.1. Brief description of the vehicle with regard to its wheel...

            2. 9.16.2. Detailed drawings of the wheel guards and their position on...

        2. Explanatory notes

      2. PART 2 EC type-approval certificate

        1. MODEL Format: A4 (210 × 297 mm) EC TYPE-APPROVAL CERTIFICATE Stamp of type-approval authority...EC TYPE-APPROVAL CERTIFICATE Stamp of type-approval authority Communication concerning: Delete...

          1. SECTION I 0.1. Make (trade name of manufacturer): …

            1. 0.1. Make (trade name of manufacturer): …

            2. 0.2. Type: …

              1. 0.2.1. Commercial name(s) (if available): …

            3. 0.3. Means of identification of type, if marked on the vehicle:...

              1. 0.3.1. Location of that marking: …

            4. 0.4. Category of vehicle: …

            5. 0.5. Name and address of manufacturer: …

            6. 0.8. Name(s) and address(es) of assembly plant(s): …

            7. 0.9. Name and address of the manufacturer's representative (if any): …...

          2. SECTION II 1. Additional information: see Addendum.

            1. 1. Additional information: see Addendum.

            2. 2. Technical service responsible for carrying out the tests: …

            3. 3. Date of test report: …

            4. 4. Number of test report: …

            5. 5. Remarks (if any): see Addendum.

            6. 6. Place: …

            7. 7. Date: …

            8. 8. Signature: …

      3. Addendum

        to EC type-approval certificate No …

        1. 1. Additional information:

        2. 2. Permanently driven axle(s): axle 1/axle 2/…

        3. 3. Suspension height adjustable: yes/no

        4. 4. Wheel guards detachable/not detachable as a unit/in parts

        5. 5. Remarks: …

    2. ANNEX II

      Requirements for wheel guards

      1. 1. GENERAL REQUIREMENTS

        1. 1.1. The motor vehicle shall be provided with a wheel guard...

        2. 1.2. The wheel guard may consist of parts of the bodywork...

      2. 2. SPECIFIC REQUIREMENTS

        1. 2.1. The wheel guards shall meet the following requirements with the...

        2. 2.1.1. In the part formed by radial planes at an angle...

        3. 2.1.1.1. For the purposes of determining the widths referred to in...

        4. 2.1.2. The rear of the wheel guard shall not terminate above...

        5. 2.1.3. The contour and location of each wheel guard shall be...

        6. 2.1.4. In the case of vehicles having an adjustable suspension height,...

        7. 2.2. The wheel guards may consist of several components, provided that...

        8. 2.3. The wheel guards shall be firmly attached. However, they may...

      3. 3. USE OF SNOW TRACTION DEVICES

        1. 3.1. In the case of vehicles where only two wheels are...

        2. 3.2. In the case of vehicles where all wheels are driven,...

        3. 3.3. The vehicle manufacturer shall include relevant instructions regarding the correct...