Commission Delegated Regulation (EU) No 1060/2010Show full title

Commission Delegated Regulation (EU) No 1060/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household refrigerating appliances (Text with EEA relevance)

  1. Introductory Text

  2. Article 1.Subject matter and scope

  3. Article 2.Definitions

  4. Article 3.Responsibilities of suppliers

  5. Article 4.Responsibilities of dealers

  6. Article 5.Measurement methods

  7. Article 6.Verification procedure for market surveillance purposes

  8. Article 7.Revision

  9. Article 8.Repeal

  10. Article 9.Transitional provisions

  11. Article 10.Entry into force and application

  12. Signature

    1. ANNEX I

      Definitions applicable for the purposes of Annexes II to IX

      1. For the purposes of Annexes II to IX, the following...

      2. ‘frost-free system’ means a system automatically operated to prevent the...

    2. ANNEX II

      Label

      1. 1. LABEL FOR HOUSEHOLD REFRIGERATING APPLIANCES CLASSIFIED IN ENERGY EFFICIENCY CLASSES...

        1. (1) The following information shall be included in the label:

        2. (2) The design of the label shall be in accordance with...

      2. 2. LABEL FOR HOUSEHOLD REFRIGERATING APPLIANCES CLASSIFIED IN ENERGY EFFICIENCY CLASSES...

        1. (1) The information listed in point 1(1) shall be included in...

        2. (2) The design of the label shall be in accordance with...

      3. 3. LABEL DESIGN

        1. (1) For household refrigerating appliances classified in energy efficiency classes A+++...

        2. (2) For household refrigerating appliances classified in energy efficiency classes D...

        3. (3) For wine storage appliances, the design of the label shall...

    3. ANNEX III

      Product Fiche

      1. 1. The information in the product fiche shall be provided in...

      2. 2. One fiche may cover a number of refrigerating appliances models...

      3. 3. The information contained in the fiche may be given in...

    4. ANNEX IV

      Technical documentation

      1. 1. The technical documentation referred to in Article 3(c) shall include:...

      2. 2. Where the information included in the technical documentation file for...

    5. ANNEX V

      Information to be provided in the cases where end-users cannot be expected to see the product displayed

      1. 1. The information referred to in Article 4(b) shall be provided...

      2. 2. Where other information contained in the product fiche is also...

      3. 3. The size and font in which all the information referred...

    6. ANNEX VI

      Measurements

      1. 1. For the purposes of compliance and verification of compliance with...

      2. 2. GENERAL CONDITIONS FOR TESTING

      3. 3. TECHNICAL PARAMETERS

    7. ANNEX VII

      Product compliance verification by market surveillance authorities

      1. The verification tolerances set out in this Annex relate only...

      2. When verifying the compliance of a product model with the...

      3. The Member State authorities shall verify one single unit of...

      4. The Member State authorities shall use the measurement and calculation...

      5. The Member State authorities shall only apply the verification tolerances...

      6. Table 1 Verification tolerances Parameters Verification tolerances Gross volume The...

    8. ANNEX VIII

      Classification of household refrigerating appliances, method for calculating the equivalent volume and the Energy Efficiency Index

      1. 1. CLASSIFICATION OF HOUSEHOLD REFRIGERATING APPLIANCES

      2. 2. CALCULATION OF THE EQUIVALENT VOLUME

        1. Notes:

          1. (i) for multi-use compartments, the thermodynamic factor is determined by the...

          2. (ii) for any two-star section (within a freezer) the thermodynamic factor...

          3. (iii) for other compartments the thermodynamic factor is determined by the...

        2. Notes:

          1. (i) FF is the volume correction factor for frost-free compartments;

          2. (ii) CC is the volume correction factor for a given climate...

          3. (iii) BI is the volume correction factor for built-in appliances.

      3. 3. CALCULATION OF THE ENERGY EFFICIENCY INDEX

    9. ANNEX IX

      Energy efficiency classes

      1. The energy efficiency class of a household refrigerating appliance shall...

      2. The Energy Efficiency Index of a household refrigerating appliance shall...

      3. Table 1 Energy efficiency classes until 30 June 2014 Energy...

      4. Table 2 Energy efficiency classes from 1 July 2014 Energy...

    10. ANNEX X

      Information to be provided in the case of sale, hire or hire-purchase through the internet

      1. (1) For the purpose of points 2 to 5 of this...

      2. (2) The appropriate label made available by suppliers in accordance with...

      3. (3) The image used for accessing the label in the case...

      4. (4) In the case of nested display, the sequence of display...

      5. (5) The appropriate product fiche made available by suppliers in accordance...