ANNEX I U.K. COMBINED NOMENCLATURE

PART TWO U.K. SCHEDULE OF CUSTOMS DUTIES

SECTION V U.K. MINERAL PRODUCTS

CHAPTER 27 U.K. MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES

Additional notes(1) U.K.

5. For the purposes of headings 2710, 2711 and 2712, the term ‘specific process’ shall be taken to apply to the following operations: U.K.

(a)

vacuum distillation;

(b)

redistillation by a very thorough fractionation process;

(c)

cracking;

(d)

reforming;

(e)

extraction by means of selective solvents;

(f)

the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolorisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g)

polymerisation;

(h)

alkylation;

(ij)

isomerisation;

(k)

(in respect of products of subheadings 2710 19 31 to 2710 19 99 only) desulphurisation with hydrogen resulting in a reduction of at least 85 % of the sulphur content of the products processed (EN ISO 20846, EN ISO 20884 or EN ISO 14596 or EN ISO 24260, EN ISO 20847 and EN ISO 8754 methods);

(l)

(in respect of products of heading 2710 only) deparaffining by a process other than filtering;

(m)

(in respect of products of subheadings 2710 19 31 to 2710 19 99 only) treatment with hydrogen at a pressure of more than 20 bar and a temperature of more than 250 °C with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment with hydrogen of lubricating oils of subheadings 2710 19 71 to 2710 19 99 (for example, hydrofinishing or decolorisation) in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;

(n)

(in respect of products of subheadings 2710 19 51 to 2710 19 69 only) atmospheric distillation, on condition that less than 30 % of these products distils, by volume, including losses, at 300 °C by the ISO 3405 method (equivalent to the ASTM D 86 method). If 30 % or more by volume, including losses, of such products distils at 300 °C by the ISO 3405 method (equivalent to the ASTM D 86 method), the quantities of products which may be obtained during the atmospheric distillation and which fall in subheadings 2710 11 11 to 2710 11 90 or 2710 19 11 to 2710 19 29 shall be dutiable at the same rates as those provided for under subheadings 2710 19 61 to 2710 19 69 according to the kind and value of the products used and on the net weight of the products obtained. This rule shall not apply to products so obtained which, within a period of six months and subject to such other conditions as may be determined by the competent authorities, are to undergo a specific process or chemical transformation by a process not being a specific process;

(o)

(in respect of products of subheadings 2710 19 71 to 2710 19 99 only) treatment by means of a high-frequency electrical brush-discharge;

(p)

solely for products of subheading 2712 90 31: de-oiling by fractional crystallisation.

Should any preparatory treatment prior to the above treatments be necessary by reason of technical requirements, the customs exemption shall apply only to the quantities of the products intended for and actually subjected to such of the above treatments; any waste products arising during preparatory treatment shall also be exempt from customs duty.

(1)

Unless otherwise stated, the term ‘method’ means the latest version of the determination methods laid down by the Comité européen de normalisation (CEN), the International Standardisation Organisation (ISO), or the American Society for Testing and Materials (ASTM).