Commission Regulation (EU) No 109/2011Show full title

ANNEX II U.K. ADMINISTRATIVE DOCUMENTS FOR EC TYPE-APPROVAL OF SPRAY SUPPRESSION SYSTEMS AS SEPARATE TECHNICAL UNITS

PART 1 U.K. Information document

MODEL U.K.

Information document No … relating to the EC type-approval as a separate technical unit of spray suppression systems.

The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

If the systems, components or separate technical units referred to in this information document have electronic controls, information concerning their performance shall be supplied.

0. GENERAL U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2. Type: U.K.

0.5. Name and address of manufacturer: U.K.

0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: U.K.

0.8. Address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

1. DESCRIPTION OF THE DEVICE U.K.

1.1. A technical description of the spray suppression device indicating its physical operating principle and the relevant test to which it must be subject: U.K.

1.2. The materials used: U.K.

1.3. Drawing(s) in sufficient detail and to an appropriate scale to enable this (or these) to be identified. The drawing must show the space intended for the EC component type-approval mark: U.K.

Date

Signed

PART 2 U.K.

MODEL U.K.(maximum format: A4 (210 × 297 mm)) U.K. EC TYPE-APPROVAL CERTIFICATE U.K.

Stamp of approval authority U.K.

Communication concerning:

a Delete where not applicable.
EC type-approvala extension of EC type-approvala refusal of EC type-approvala withdrawal of EC type-approvala	of a type of spray suppression system as a component/separate technical unit
with regard to Regulation (EU) No …/…, as last amended by Regulation (EU) No …/…a
EC type-approval number:
Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer) U.K.

0.2. Type: U.K.

0.3. Means of identification of type, if marked on the separate technical unit(1): U.K.

0.3.1. Location of that marking: U.K.

0.5. Name and address of manufacturer: U.K.

0.7. Location and method of affixing of the EC approval mark: U.K.

0.8. Name(s) and address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

SECTION II U.K.

1. Additional information (where applicable): see Addendum. U.K.

2. Technical service responsible for carrying out the tests: U.K.

3. Date of test report: U.K.

4. Number of test report: U.K.

5. Remarks (if any): see Addendum. U.K.

6. Place: U.K.

7. Date: U.K.

8. Signature: U.K.

9. The index to the information package lodged with the approval authority, which may be obtained on request, is attached. U.K.

Addendum U.K. to EC type-approval certificate No

1. Additional information

1.1. Operating principle of device: energy-absorption/air/water separator(2):

1.2. Characteristics of spray suppression devices (brief description, trademark or name, number(s):

5. Remarks (if any):

PART 3 U.K. EC separate technical unit type-approval mark

1. The EC separate technical unit type-approval mark shall consist of: U.K.

1.1. A rectangle surrounding the lower-case letter ‘e’ followed by the distinguishing number of the Member State which has granted the EC separate technical unit type-approval: U.K.

1

for Germany

2

for France

3

for Italy

4

for The Netherlands

5

for Sweden

6

for Belgium

7

for Hungary

8

for the Czech Republic

9

for Spain

11

for the United Kingdom

12

for Austria

13

for Luxembourg

17

for Finland

18

for Denmark

19

for Romania

20

for Poland

21

for Portugal

23

for Greece

24

for Ireland

25

[F1 for Croatia]

26

for Slovenia

27

for Slovakia

29

for Estonia

32

for Latvia

34

for Bulgaria

36

for Lithuania

49

for Cyprus

50

for Malta

Textual Amendments

F1 Inserted by Commission Regulation (EU) No 519/2013 of 21 February 2013 adapting certain regulations and decisions in the fields of free movement of goods, freedom of movement for persons, right of establishment and freedom to provide services, company law, competition policy, agriculture, food safety, veterinary and phytosanitary policy, fisheries, transport policy, energy, taxation, statistics, social policy and employment, environment, customs union, external relations, and foreign, security and defence policy, by reason of the accession of Croatia.

1.2. In the vicinity of the rectangle the ‘base approval number’ contained in Section 4 of the type-approval number preceded by the two figures indicating the sequence number assigned to this Regulation or latest major technical amendment to this Regulation. The sequence number is ‘00’ at present. U.K.

2. The EC separate technical unit type-approval mark shall be affixed to the spray suppression device in such a way as to be indelible as well as clearly and easily legible even if the device is fitted to a vehicle. U.K.

3. An example of an EC separate technical unit type-approval mark is shown as follows. U.K.

Example of EC separate technical unit type-approval mark U.K.

Explanatory note U.K.

Legend The EC separate technical unit type-approval was issued by The Netherlands under number 0046. The first two digits ‘00’ indicate that the separate technical unit was approved according to this Regulation. The symbol ‘A’ indicates it is a device of the energy-absorption type. U.K.

(1)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(2)

Delete where not applicable.