xmlns:atom="http://www.w3.org/2005/Atom"
1.The competent authority shall take the necessary measures to control the entire chain of collection, transport, use and disposal of animal by-products and derived products, as referred to in Article 4(2) of Regulation (EC) No 1069/2009.
Those measures shall be carried out in accordance with the principles for official controls laid down in Article 3 of Regulation (EC) No 882/2004.
2.The official controls referred to in paragraph 1 shall include checks on the keeping of records and other documents required by the rules laid down in this Regulation.
3.The competent authority shall carry out the following official controls, as referred to in Article 45(1) of Regulation (EC) No 1069/2009, in accordance with the requirements set out in Annex XVI hereto:
(a)official controls in processing plants as set out in Chapter I;
(b)official controls of other activities which involve the handling of animal by-products, and derived products as set out in Sections 1 to 9 of Chapter III.
4.The competent authority shall carry out checks on seals which are applied to consignments of animal by-products or derived products.
When the competent authority applies a seal to such consignment which is transported to a place of destination, it must inform the competent authority of the place of destination.
5.The competent authority shall draw up the lists of establishments, plants and operators referred to in Article 47(1) of Regulation (EC) No 1069/2009 in accordance with the format set out in Chapter II of Annex XVI hereto.
6.The competent authority of the Member State of destination shall decide upon the application by an operator concerning the acceptance or refusal of certain Category 1, Category 2 material and meat-and-bone meal or animal fat derived from Category 1 and Category 2 materials, within 20 calendar days from the date of receipt of such application provided that it has been submitted in one of the official languages of that Member State.
7.Operators shall submit applications for the authorisation referred to in paragraph 6 in accordance with the standard format set out in Section 10 of Chapter III of Annex XVI hereto.
1.Where a plant or establishment approved for the processing of Category 3 material is subsequently granted temporary approval for the processing of Category 1 or Category 2 material, in accordance with Article 24(2)(b)(ii) of Regulation (EC) No 1069/2009, it shall be prohibited from recommencing the processing of Category 3 material, without first obtaining the approval of the competent authority to recommence processing of Category 3 material in accordance with Article 44 of that Regulation.
2.Where a plant or establishment approved for the processing of Category 2 material is subsequently granted temporary approval for the processing of Category 1 material, in accordance with Article 24(2)(b)(ii) of Regulation (EC) No 1069/2009, it shall be prohibited from recommencing the processing of Category 2 material, without first obtaining the approval of the competent authority to recommence processing of Category 2 material in accordance with Article 44 of that Regulation.