Commission Regulation (EU) No 547/2011Show full title

ANNEX I U.K. LABELLING REQUIREMENTS AS REFERRED TO IN ARTICLE 1

(1) The following information shall be included clearly and indelibly on the packaging of plant protection products: U.K.

(a)

the trade name or designation of the plant protection product;

(b)

the name and address of the holder of the authorisation and the authorisation number of the plant protection product and, if different, the name and address of the person responsible for the final packaging and labelling or for the final labelling of the plant protection product on the market;

(c)

the name of each active substance expressed as provided for in [F1 Article 18(3) of Regulation (EC) No 1272/2008 of the European Parliament and of the Council] with clear indication of the chemical form. The name must be as given in [F2 the GB mandatory classification and labelling list] or, if not included therein, its ISO common name. If the latter is not available, the active substance shall be designated by its chemical designation according to IUPAC rules;

(d)

the concentration of each active substance expressed as follows:

(i)

for solids, aerosols, volatile liquids (maximum boiling point 50 °C) or viscous liquids (lower limit 1 Pa s at 20 °C), as % w/w and g/kg,

(ii)

for other liquids/gel formulations, as % w/w and g/l,

(iii)

for gases, as% v/v and % w/w.

Textual Amendments

F1 Words in Annex 1 point (1)(c) substituted (31.12.2020) by The Plant Protection Products (Miscellaneous Amendments) (EU Exit) Regulations 2019 (S.I. 2019/556), regs. 1(1), 19(5)(a); 2020 c. 1, Sch. 5 para. 1(1)

F2 Words in Annex 1 point (1)(c) substituted (31.12.2020) by The Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/720), reg. 1(2), Sch. 2 para. 60(2)(a) (as amended by S.I. 2020/1567, reg. 1(2), Sch. 2 para. 20); 2020 c. 1, Sch. 5 para. 1(1)

If the active substance is a micro-organism, its content shall be expressed as the number of active units per volume or weight or any other matter that is relevant to the micro-organism, e.g. colony forming units per gram (cfu/g);

(e)

the net quantity of plant protection product given in: g or kg for solid formulations, g, kg, ml or l for gases and ml or l for liquid formulations;

(f)

the formulation batch number and production date;

(g)

information on first aid;

(h)

the nature of any special risks to human or animal health or to the environment, by means of standard phrases selected by the competent authority, as appropriate, from those set out in Annex II;

(i)

safety precautions for the protection of human or animal health or of the environment, in the form of standard phrases selected by the competent authority, as appropriate, from those set out in Annex III;

(j)

the type of action of the plant protection product (e.g. insecticide, growth regulator, herbicide, fungicide, etc.) and the mode of action;

(k)

the type of preparation (e.g. wettable powder, emulsifiable concentrate, etc.);

(l)

the uses for which the plant protection product has been authorised and any specific agricultural, plant health and environmental conditions under which the product may be used or shall not be used;

(m)

directions for and conditions of use and the dose rate including where appropriate the maximum dose per hectare per application and the maximum number of applications per year. The dose rate is expressed in metric units, for each use provided for under the terms of the authorisation;

(n)

where appropriate, the safety interval for each use between the last application and:

(i)

sowing or planting of the crop to be protected,

(ii)

sowing or planting of succeeding crops,

(iii)

access by humans or animals,

(iv)

harvesting,

(v)

use or consumption;

(o)

particulars of possible phytotoxicity, varietal susceptibility, and any other direct or indirect adverse side effects on plants or products of plant origin together with the intervals to be observed between application and sowing or planting of:

• the crop in question, or

• subsequent and adjacent crops;

(p)

if accompanied by a leaflet, as set out in point 2, the sentence ‘Read accompanying instructions before use’;

(q)

directions for appropriate conditions of storage, safe disposal of the plant protection product and of the packaging;

(r)

where necessary, the expiry date for normal conditions of storage;

(s)

a prohibition concerning the re-use of packaging, except by the authorisation holder and on condition that packaging has been specifically designed in order to allow re-use by the authorisation holder;

(t)

any information required by the authorisation in accordance with Articles 31, 36(3), 51(5) or 54 of Regulation (EC) No 1107/2009;

(u)

the categories of users allowed to use the plant protection product, where use is limited to certain categories.

[F3 (1A) In point (1)(c), the “GB mandatory classification and labelling list” means the list of mandatory classification and labelling requirements of substances and groups of substances established and maintained in accordance with Article 38A of Regulation (EC) No 1272/2008.] U.K.

Textual Amendments

F3 Annex 1 point (1A) inserted (31.12.2020) by The Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/720), reg. 1(2), Sch. 2 para. 60(2)(b) (as amended by S.I. 2020/1567, reg. 1(2), Sch. 2 para. 20); 2020 c. 1, Sch. 5 para. 1(1)

(2) The information required by points 1-(m), (n), (o), (q), (r) and (t) may be indicated on a separate leaflet accompanying the package if the space available on the package is too small. Such a leaflet shall be regarded as part of the label. U.K.

(3) In no circumstances may the label of the packaging of a plant protection product bear the indications ‘non-toxic’, ‘harmless’, or similar indications. However, information that the plant protection product may be used when bees or other non target species are active, or when crops or weeds are in flower or other such phrases to protect bees, or phrases with similar information concerning the protection of bees or of other non-target species, may be included in the label, if the authorisation explicitly allows use under such conditions. U.K.

[F4 (4) A competent authority may make the placing of plant protection products on the market in its constituent territory subject to the additional labelling of the product in a language other than English.] U.K.

Textual Amendments

F4 Annex 1 point (4) substituted (31.12.2020) by The Plant Protection Products (Miscellaneous Amendments) (EU Exit) Regulations 2019 (S.I. 2019/556), regs. 1(1), 19(5)(b); 2020 c. 1, Sch. 5 para. 1(1)

(5) By way of derogation from point (1), labelling and packaging of plant protection products to be used for experiments or tests for research or development purposes, as provided for in Article 54 of Regulation (EC) No 1107/2009, need only comply with points (1)(b), (c), (d), (j), (k) of this Annex. The label shall include information required by the permit for trial purposes, provided for in Article 54(1) of Regulation (EC) No 1107/2009 and the words ‘product intended for experimental use, not fully characterised, handle with extreme care’. U.K.