Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance) (c. 582)

ANNEX XI U.K. EC TYPE-APPROVAL OF REPLACEMENT POLLUTION CONTROL DEVICES AS SEPARATE TECHNICAL UNIT

Appendix 1

MODEL Information document No … U.K.

relating to the EC type-approval of replacement pollution control devices

The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.

0. GENERAL U.K.

0.1. Make (trade name of manufacturer): … U.K.

0.2. Type … U.K.

0.2.1.

Commercial name(s) (if available): …

0.3. Means of identification of type: … U.K.

0.5. Name and address of manufacturer: … U.K.

0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: … U.K.

0.8. Name(s) and address(es) of assembly plant(s): … U.K.

0.9 Name and address of the manufacturer’s authorised representative (if any): … U.K.

1. DESCRIPTION OF THE DEVICE U.K.

1.1. Type of the replacement pollution control device: (oxidation catalyst, three-way catalyst, SCR catalyst, particulate filter, etc.) … U.K.

1.2. Drawings of the replacement pollution control device, identifying in particular all the characteristics referred to under ‘type of pollution control device’ of Article 2 of Regulation (EU) No 582/2011: … U.K.

1.3. Description of the engine and vehicle type or types for which the replacement pollution control device is intended: … U.K.

1.3.1.

Number(s) and/or symbol(s) characterising the engine and vehicle type(s): …

1.3.2

Number(s) and/or symbol(s) characterising the original pollution control device(s) which the replacement pollution control device is intended to replace: …

1.3.3.

Is the replacement pollution control device intended to be compatible with OBD requirements (Yes/No)(1)

1.3.4.

Is the replacement pollution control device compatible with existing vehicle/engine control systems (yes/no)(1)

1.4. Description and drawings showing the position of the replacement pollution control device relative to the engine exhaust manifold(s): … U.K.

[F1 2. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION U.K.

2.1. Address of principal website for access to vehicle repair and maintenance information U.K.

2.1.1.

Date from which it is available (no later than six months from the date of type-approval)

2.2. Terms and conditions of access to website U.K.

2.3. Format of the vehicle repair and maintenance information accessible through website] U.K.

Textual Amendments

F1 Substituted by Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) (Text with EEA relevance).

(1)

Delete where not applicable.