Search Legislation

Advanced Search

Commission Regulation (EU) No 582/2011Show full title

Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance)

Help about what version

What Version

Help about advanced features

Advanced Features

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

There are outstanding changes not yet made to Commission Regulation (EU) No 582/2011. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to the whole legislation item and associated provisions

ANNEX XVIU.K. AMENDMENTS TO DIRECTIVE 2007/46/EC

Directive 2007/46/EC is amended as follows:

(1)

Annex I is amended as follows:

(a)

the following point 3.2.1.11 is inserted:

‘3.2.1.11.(Euro VI only) Manufacturer references of the Documentation package required by Articles 5, 7 and 9 of Regulation (EU) No 582/2011 enabling the approval authority to evaluate the emission control strategies and the Systems on-board the engine to ensure the correct operation of NOx control measures’;

(b)

point 3.2.2.2 is replaced by the following:

‘3.2.2.2.Heavy duty vehicles Diesel/Petrol/LPG/NG-H/NG-L/NG-HL/Ethanol (ED95)/Ethanol (E85) (1) (6)’;

(c)

the following point 3.2.2.2.1 is inserted:

‘3.2.2.2.1.(Euro VI only) Fuels compatible with use by the engine declared by the manufacturer in accordance with Section 1.1.2 of Annex I to Regulation (EU) No 582/2011 (as applicable)’;

(d)

the following point 3.2.8.3.3 is inserted:

‘3.2.8.3.3.(Euro VI only) Actual Intake system depression at rated engine speed and at 100 % load on the vehicle: kPa’;

(e)

the following point 3.2.9.2.1 is inserted:

‘3.2.9.2.1.(Euro VI only) Description and/or drawing of the elements of the exhaust system that are not part of the engine system’;

(f)

the following point 3.2.9.3.1 is inserted:

‘3.2.9.3.1.(Euro VI only) Actual exhaust back pressure at rated engine speed and at 100 % load on the vehicle (compression-ignition engines only): … kPa’;

(g)

the following point 3.2.9.7.1 is inserted:

‘3.2.9.7.1.(Euro VI only) Acceptable Exhaust system volume: …dm3’;

(h)

the following point 3.2.12.1.1 is inserted:

‘3.2.12.1.1.(Euro VI only) Device for recycling crankcase gases: yes/no (2)

If yes, description and drawings:

If no, compliance with Annex V to Regulation (EU) No 582/2011 required’;

(i)

in point 3.2.12.2.6.8.1 the following wording is added;

‘(not applicable to Euro VI)’;

(j)

the following point 3.2.12.2.6.8.1.1 is inserted:

‘3.2.12.2.6.8.1.1.(Euro VI only) Number of WHTC test cycles without regeneration (n):’;

(k)

in points 3.2.12.2.6.8.2 the following wording is added:

‘(not applicable to Euro VI)’;

(l)

the following point 3.2.12.2.6.8.2.1 is inserted:

‘3.2.12.2.6.8.2.1.(Euro VI only) Number of WHTC test cycles with regeneration (nR):’;

(m)

the following points 3.2.12.2.6.9 and 3.2.12.2.6.9.1 are inserted:

‘3.2.12.2.6.9.Other systems: yes/no (1)

3.2.12.2.6.9.1.Description and operation’;

(n)

the following points 3.2.12.2.7.0.1 to 3.2.12.2.7.0.8 are inserted:

‘3.2.12.2.7.0.1.

(Euro VI only) Number of OBD engine families within the engine family

3.2.12.2.7.0.2.

List of the OBD engine families (when applicable)

3.2.12.2.7.0.3.

Number of the OBD engine family the parent engine / the engine member belongs to:

3.2.12.2.7.0.4.

Manufacturer references of the OBD-Documentation required by Article 5(4)(c) and Article 9(4) of Regulation (EU) No 582/2011 and specified in Annex X to that Regulation for the purpose of approving the OBD system

3.2.12.2.7.0.5.

When appropriate, manufacturer reference of the Documentation for installing in a vehicle an OBD equipped engine system

3.2.12.2.7.0.6.

When appropriate, manufacturer reference of the documentation package related to the installation on the vehicle of the OBD system of an approved engine

3.2.12.2.7.0.7.

Written description and/or drawing of the MI (6)

3.2.12.2.7.0.8.

Written description and/or drawing of the OBD off-board communication interface (6)’;

(o)

the following points 3.2.12.2.7.6.5, 3.2.12.2.7.7 and 3.2.12.2.7.7.1 are inserted:

‘3.2.12.2.7.6.5.(Euro VI only) OBD Communication protocol standard: (4)

3.2.12.2.7.7.(Euro VI only) Manufacturer reference of the OBD related information required by of Article 5(4)(d) and Article 9(4) of Regulation (EU) No 582/2011 for the purpose of complying with the provisions on access to vehicle OBD and vehicle Repair and Maintenance Information, or

3.2.12.2.7.7.1.As an alternative to a manufacturer reference provided in Section 3.2.12.2.7.7 reference of the attachment to the information document set out in Appendix 4 of Annex I to Regulation (EU) No 582/2011 that contains the following table, once completed according to the given example:

  • Component — Fault code — Monitoring strategy — Fault detection criteria — MI activation criteria — Secondary parameters — Preconditioning — Demonstration test

  • Catalyst – P0420 — Oxygen sensor 1 and 2 signals — Difference between sensor 1 and sensor 2 signals — 3rd cycle — Engine speed, engine load, A/F mode, catalyst temperature — Two Type 1 cycles — Type 1’;

(p)

the following points 3.2.12.2.8.1 to 3.2.12.2.8.8.3 are inserted:

‘3.2.12.2.8.1.

(Euro VI only) Systems to ensure the correct operation of NOx control measures

3.2.12.2.8.2.

(Euro VI only) Engine with permanent deactivation of the driver inducement, for use by the rescue services or in vehicles specified in Article 2(3)(b) of this Directive: yes/no

3.2.12.2.8.3.

(Euro VI only) Number of OBD engine families within the engine family considered when ensuring the correct operation of NOx control measures

3.2.12.2.8.4.

(Euro VI only) List of the OBD engine families (when applicable)

3.2.12.2.8.5.

(Euro VI only) Number of the OBD engine family the parent engine / the engine member belongs to

3.2.12.2.8.6.

(Euro VI only) Lowest concentration of the active ingredient present in the reagent that does not activate the warning system (CDmin): (% vol.)

3.2.12.2.8.7.

(Euro VI only) When appropriate, manufacturer reference of the Documentation for installing in a vehicle the systems to ensure the correct operation of NOx control measures

3.2.12.2.8.8.

Components on-board the vehicle of the systems ensuring the correct operation of NOx control measures

3.2.12.2.8.8.1.

Activation of the creep mode:

“disable after restart” / “disable after fuelling” / “disable after parking” (7)

3.2.12.2.8.8.2.

When appropriate, manufacturer reference of the documentation package related to the installation on the vehicle of the system ensuring the correct operation of NOx control measures of an approved engine

3.2.12.2.8.8.3.

Written description and/or drawing of the warning signal (6)’;

(q)

the following points 3.2.17.8.1.0.1 and 3.2.17.8.1.0.2 are inserted:

‘3.2.17.8.1.0.1.

(Euro VI only) Self adaptive feature? Yes/No (1)

3.2.17.8.1.0.2.

(Euro VI only) Calibration for a specific gas composition NG-H/NG-L/NG-HL (1)

Transformation for a specific gas composition NG-Ht/NG-Lt/NG-HLt (1)’;

(r)

The following points 3.5.4 to 3.5.5.2 are inserted:

‘3.5.4.

CO2 emissions for heavy duty engines (Euro VI only)

3.5.4.1.

CO2 mass emissions WHSC test … g/kWh

3.5.4.2.

CO2 mass emissions WHTC test: … g/kWh

3.5.5.

Fuel consumption for heavy duty engines (Euro VI only)

3.5.5.1.

Fuel consumption WHSC test: … g/kWh

3.5.5.2.

Fuel consumption WHTC test: … g/kWh’;

(2)

Part I, Section A of Annex III is amended as follows:

(a)

the following point 3.2.1.11 is inserted:

‘3.2.1.11.(Euro VI only) Manufacturer references of the Documentation package required by Articles 5, 7 and 9 of Regulation (EU) No 582/2011 enabling the approval authority to evaluate the emission control strategies and the systems on-board the engine to ensure the correct operation of NOx control measures’;

(b)

point 3.2.2.2 is replaced by the following:

‘3.2.2.2Heavy duty vehicles Diesel/Petrol/LPG/NG-H/NG-L/NG-HL/Ethanol (ED95)/Ethanol (E85) (1) (6)’;

(c)

the following point 3.2.2.2.1 is inserted:

‘3.2.2.2.1.(Euro VI only) Fuels compatible with use by the engine declared by the manufacturer in accordance with Section 1.1.3 of Annex I to Regulation (EU) No 582/2011 (as applicable)’;

(d)

the following point 3.2.8.3.3 is inserted:

‘3.2.8.3.3.(Euro VI only) Actual Intake system depression at rated engine speed and at 100 % load on the vehicle: kPa’;

(e)

the following point 3.2.9.2.1 is inserted:

‘3.2.9.2.1.(Euro VI only) Description and/or drawing of the elements of the exhaust system that are not part of the engine system’;

(f)

the following point 3.2.9.3.1 is inserted:

‘3.2.9.3.1.(Euro VI only) Actual exhaust back pressure at rated engine speed and at 100 % load on the vehicle (compression-ignition engines only): … kPa’;

(g)

the following point 3.2.9.7.1 is inserted:

‘3.2.9.7.1.(Euro VI only) Acceptable Exhaust system volume: …dm3’;

(h)

the following point 3.2.12.1.1 is inserted:

‘3.2.12.1.1.(Euro VI only) Device for recycling crankcase gases: yes/no (2)

If yes, description and drawings:

If no, compliance with Annex V to Regulation (EU) No 582/2011 required’;

(i)

the following points 3.2.12.2.6.9 and 3.2.12.2.6.9.1 are inserted:

‘3.2.12.2.6.9.Other systems: yes/no (1)

3.2.12.2.6.9.1.Description and operation’;

(j)

the following points 3.2.12.2.7.0.1 to 3.2.12.2.7.0.8 are inserted:

‘3.2.12.2.7.0.1.

(Euro VI only) Number of OBD engine families within the engine family

3.2.12.2.7.0.2.

(Euro VI only) List of the OBD engine families (when applicable)

3.2.12.2.7.0.3.

(Euro VI only) Number of the OBD engine family the parent engine / the engine member belongs to:

3.2.12.2.7.0.4.

(Euro VI only) Manufacturer references of the OBD-Documentation required by Article 5(4)(c) and Article 9(4) of Regulation (EU) No 582/2011 and specified in Annex X to that Regulation for the purpose of approving the OBD system

3.2.12.2.7.0.5.

(Euro VI only) When appropriate, manufacturer reference of the Documentation for installing in a vehicle an OBD equipped engine system

3.2.12.2.7.0.6.

(Euro VI only) When appropriate, manufacturer reference of the documentation package related to the installation on the vehicle of the OBD system of an approved engine

3.2.12.2.7.0.7.

(Euro VI only) Written description and/or drawing of the MI (6)

3.2.12.2.7.0.8.

(Euro VI only) Written description and/or drawing of the OBD off-board communication interface (6)’;

(k)

the following points 3.2.12.2.7.6.5, 3.2.12.2.7.7 and 3.2.12.2.7.7.1 are inserted:

‘3.2.12.2.7.6.5.(Euro VI only) OBD Communication protocol standard: (4)

3.2.12.2.7.7.(Euro VI only) Manufacturer reference of the OBD related information required by of Article 5(4)(d) and Article 9(4) of Regulation (EU) No 582/2011 for the purpose of complying with the provisions on access to vehicle OBD and vehicle Repair and Maintenance Information, or

3.2.12.2.7.7.1.As an alternative to a manufacturer reference provided in Section 3.2.12.2.7.7 reference of the attachment to the information document set out in Appendix 4 of Annex III to Regulation (EU) No 582/2011 that contains the following table, once completed according to the given example:

  • Component — Fault code — Monitoring strategy — Fault detection criteria — MI activation criteria — Secondary parameters — Preconditioning — Demonstration test

  • Catalyst — P0420 — Oxygen sensor 1 and 2 signals — Difference between sensor 1 and sensor 2 signals — 3rd cycle — Engine speed, engine load, A/F mode, catalyst temperature — Two Type 1 cycles — Type 1’;

(l)

the following points 3.2.12.2.8.1 to 3.2.12.2.8.8.3 are inserted:

‘3.2.12.2.8.1.

(Euro VI only) Systems to ensure the correct operation of NOx control measures

3.2.12.2.8.2.

(Euro VI only) Engine with permanent deactivation of the driver inducement, for use by the rescue services or in vehicles specified in Article 2(3)(b) of this Directive: yes/no

3.2.12.2.8.3.

(Euro VI only) Number of OBD engine families within the engine family considered when ensuring the correct operation of NOx control measures

3.2.12.2.8.4.

(Euro VI only) List of the OBD engine families (when applicable)

3.2.12.2.8.5.

(Euro VI only) Number of the OBD engine family the parent engine / the engine member belongs to

3.2.12.2.8.6.

(Euro VI only) Lowest concentration of the active ingredient present in the reagent that does not activate the warning system (CDmin): (% vol.)

3.2.12.2.8.7.

(Euro VI only) When appropriate, manufacturer reference of the Documentation for installing in a vehicle the systems to ensure the correct operation of NOx control measures

3.2.12.2.8.8.

Components on-board the vehicle of the systems ensuring the correct operation of NOx control measures

3.2.12.2.8.8.1.

Activation of the creep mode:

“disable after restart” / “disable after fuelling” / “disable after parking” (7)

3.2.12.2.8.8.2.

When appropriate, manufacturer reference of the documentation package related to the installation on the vehicle of the system ensuring the correct operation of NOx control measures of an approved engine

3.2.12.2.8.8.3.

Written description and/or drawing of the warning signal (6)’;

(m)

the following points 3.2.17.8.1.0.1 and 3.2.17.8.1.0.2 are inserted:

‘3.2.17.8.1.0.1.

(Euro VI only) Self adaptive feature? Yes/No (1)

3.2.17.8.1.0.2.

(Euro VI only) Calibration for a specific gas composition NG-H/NG-L/NG-HL (1)

Transformation for a specific gas composition NG-Ht/NG-Lt/NG-HLt (1)’;

(n)

the following points 3.5.4 to 3.5.5.2 are inserted:

‘3.5.4.

(Euro VI only) CO2 emissions for heavy duty engines

3.5.4.1.

(Euro VI only) CO2 mass emissions WHSC test: … g/kWh

3.5.4.2.

(Euro VI only) CO2 mass emissions WHTC test: … g/kWh

3.5.5.

(Euro VI only) Fuel consumption for heavy duty engines

3.5.5.1.

(Euro VI only) Fuel consumption WHSC test: … g/kWh

3.5.5.2.

(Euro VI only) Fuel consumption WHTC test: … g/kWh’.

Back to top

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources