1.The manufacturer shall take all necessary measures, in accordance with this Regulation and Article 4 of Regulation (EC) No 595/2009, so as to ensure that the tailpipe emissions are effectively limited throughout the normal life of the vehicle and under all normal conditions of use.
Those measures shall take the following into account:
(a)the general requirements including the performance requirements and the prohibition of defeat strategies;
(b)the requirements to effectively limit the tailpipe emissions under the range of ambient conditions under which the vehicle may be expected to operate, and under the range of operating conditions that may be encountered;
(c)the requirements with respect to off-cycle laboratory testing at type-approval;
[F1(d) the requirements with respect to the PEMS demonstration test at type-approval and any additional requirements with respect to off-cycle in-use vehicle testing, as provided for in this Regulation;]
(e)the requirement for the manufacturer to provide a statement of compliance with the requirements limiting off-cycle emissions.
2.The manufacturer shall fulfil the specific requirements, together with the associated test procedures, set out in Annex VI.
F23.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F1 Substituted by Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) (Text with EEA relevance).
F2 Deleted by Commission Regulation (EU) 2016/1718 of 20 September 2016 amending Regulation (EU) No 582/2011 with respect to emissions from heavy-duty vehicles as regards the provisions on testing by means of portable emission measurement systems (PEMS) and the procedure for the testing of the durability of replacement pollution control devices (Text with EEA relevance).