Commission Regulation (EU) No 582/2011Show full title

Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance)

Article 15U.K.Pollution control devices

1.[F1The manufacturer shall ensure that replacement pollution control devices intended to be fitted to EC type-approved engine systems or vehicles covered by Regulation (EC) No 595/2009 are EC type-approved, as separate technical units in accordance with the requirements of this Article and of Articles 1a, 16 and 17.]

Catalytic converters, deNOx devices and particulate filters shall be considered to be pollution control devices for the purposes of this Regulation.

2.Original replacement pollution control devices, which fall within the type covered by point 3.2.12 of Appendix 4 to Annex I and are intended for fitment to a vehicle to which the relevant type-approval document refers, do not need to comply with all provisions of Annex XI provided that they fulfil the requirements of points 2.1, 2.2 and 2.3 of that Annex.

3.The manufacturer shall ensure that the original pollution control device carries identification markings.

4.The identification markings referred to in paragraph 3 shall comprise the following:

(a)the vehicle or engine manufacturer's name or trade mark;

(b)the make and identifying part number of the original pollution control device as recorded in the information referred to in point 3.2.12.2 of Appendix 4 to Annex I.

F25.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments