Article 6.Verification procedure for market surveillance purposes
Definitions applicable for the purposes of Annexes II to VII
1. LABEL OF AIR CONDITIONERS, EXCEPT SINGLE DUCT AND DOUBLE DUCT...
1.1. Reversible air conditioners classified in energy efficiency classes A to...
1.2. Reversible air conditioners classified in energy efficiency classes A+ to...
1.3. Reversible air conditioners classified in energy efficiency classes A++ to...
1.4. Reversible air conditioners classified in energy efficiency classes A+++ to...
2. LABEL OF AIR CONDITIONERS, EXCEPT SINGLE DUCT AND DOUBLE DUCT...
2.1. Cooling-only air conditioners classified in energy efficiency classes A to...
2.2. Cooling-only air conditioners classified in energy efficiency classes A+ to...
2.3. Cooling-only air conditioners classified in energy efficiency classes A++ to...
2.4. Cooling-only air conditioners classified in energy efficiency classes A+++ to...
3. LABEL OF AIR CONDITIONERS, EXCEPT SINGLE DUCT AND DOUBLE DUCT...
3.1. Heating-only air conditioners classified in energy efficiency classes A to...
3.2. Heating-only air conditioners classified in energy efficiency classes A+ to...
3.3. Heating-only air conditioners classified in energy efficiency classes A++ to...
3.4. Heating-only air conditioners classified in energy efficiency classes A+++ to...
1. The information in the product fiche shall be given in...
2. Additionally, the following information shall be included in the product...
3. Additionally, the following notes define the information to be included...
4. Additionally, the following notes define the information to be included...
5. One fiche may cover a number of appliance models supplied...
6. The information contained in the fiche may be given in...
1. For the purposes of compliance and verification of compliance with...
2. The determination of the seasonal energy consumption and seasonal energy...
3. Where the information relating to a specific model, being a...
4. The energy efficiency ratio (EERrated) and, when applicable, coefficient of...
5. The calculation of electricity consumption for cooling and/or heating shall...
Table 2 Standard rating conditions, temperatures in ‘dry bulb’ air...
Table 3 Reference design conditions, temperatures in ‘dry bulb’ air...
Table 4 Operational hours per type of appliance per functional...
Product compliance verification by market surveillance authorities
The verification tolerances set out in this Annex relate only...
When verifying the compliance of a product model with the...
The Member State authorities shall verify one single unit of...
The Member State authorities shall use the measurement and calculation...
The Member State authorities shall only apply the verification tolerances...
Table 1 Verification tolerances Parameters Verification tolerances Seasonal energy efficiency...
Information to be provided in the case of sale, hire or hire-purchase through the internet