Commission Regulation (EU) No 206/2012Show full title

1. Introductory Text

2. Article 1. Subject matter and scope

3. Article 2. Definitions

4. Article 3. Ecodesign requirements and timetable

5. Article 4. Conformity assessment

6. Article 5. Verification procedure for market surveillance purposes

7. Article 6. Benchmarks

8. Article 7. Revision

9. Article 8. Entry into force and application

10. Signature

11. 1. ANNEX I

       Ecodesign requirements

       1. 1. DEFINITIONS APPLICABLE FOR THE PURPOSES OF THE ANNEXES

       2. 2. REQUIREMENTS FOR MINIMUM ENERGY EFFICIENCY, MAXIMUM POWER CONSUMPTION IN OFF-MODE...

       3. 3. PRODUCT INFORMATION REQUIREMENTS

    2. ANNEX II

       Measurements and calculations

       1. 1. For the purposes of compliance and verification of compliance with...

       2. 2. The determination of the seasonal energy consumption and efficiency for...

       3. 3. Where the information relating to a specific model, being a...

       4. 4. The rated energy efficiency ratio (EERrated) and, when applicable, rated...

       5. 5. The calculation of seasonal electricity consumption for cooling (and/or heating)...

       6. 6. The comfort fan efficiency shall be determined on the basis...

       7. Table 2 Standard rating conditions, temperatures in ‘dry bulb’ air...

       8. Table 3 Reference design conditions, temperatures in ‘dry bulb’ air...

       9. Table 4 Operational hours per type of appliance per functional...

    3. ANNEX III

       Product compliance verification by market surveillance authorities

       1. The verification tolerances defined in this Annex relate only to...

       2. When verifying the compliance of a product model with the...

       3. The Great Britain authorities shall verify one single unit of...

       4. The Great Britain authorities shall use the measurement and calculation...

       5. The Great Britain authorities shall only apply the verification tolerances...

       6. Table 1 Verification tolerances Parameters Verification tolerances Seasonal energy efficiency...

    4. ANNEX IV

       Benchmarks

       1. At the time of entry into force of this Regulation,...

       2. Benchmarks for air conditioners Based on efficiency of evaporatively cooled...