- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 31/01/2020.
There are outstanding changes not yet made to Commission Delegated Regulation (EU) No 392/2012. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
For the calculation of the Energy Efficiency Index (EEI) of a household tumble drier model, the weighted Annual Energy Consumption of a household tumble drier for the standard cotton programme at full and partial load is compared to its Standard Annual Energy Consumption.
The Energy Efficiency Index (EEI) is calculated as follows and rounded to one decimal place:
where:
=
weighted Annual Energy Consumption of the household tumble drier.
=
standard Annual Energy Consumption of the household tumble drier.
The Standard Annual Energy Consumption (SAEC ) is calculated in kWh/year as follows and rounded to two decimal places:
for all household tumble driers that are not air-vented:
SAEC = 140 × c 0,8
for air-vented household tumble driers:
where:
is the rated capacity of the household tumble drier for the standard cotton programme.
is the weighted programme time for the standard cotton programme.
The weighted Annual Energy Consumption (AEC ) is calculated in kWh/year as follows and is rounded to two decimal places:
where:
=
weighted energy consumption, in kWh and rounded to two decimal places.
=
power in ‘off-mode’ for the standard cotton programme at full load, in W and rounded to two decimal places.
=
power in ‘left-on mode’ for the standard cotton programme at full load, in W and rounded to two decimal places.
=
weighted programme time, in minutes and rounded to the nearest minute.
=
total number of drying cycles per year.
When the household tumble drier is equipped with a power management system, with the household tumble drier reverting automatically to ‘off-mode’ after the end of the programme, the weighted Annual Energy Consumption (AEC ) is calculated taking into consideration the effective duration of the ‘left-on mode’, according to the following formula:
where:
=
duration of the ‘left-on mode’ for the standard cotton programme at full load, in minutes and rounded to the nearest minute.
The weighted programme time (Tt ) for the standard cotton programme is calculated in minutes as follows and rounded to the nearest minute:
Tt = (3 × Tdry + 4 × Tdry½ )/7
where:
=
programme time for the standard cotton programme at full load, in minutes and rounded to the nearest minute.
=
programme time for the standard cotton programme at partial load, in minutes and rounded to the nearest minute.
The weighted energy consumption (Et ) is calculated in kWh as follows and rounded to two decimal places:
Et = (3 × Edry + 4 × Edry½ )/7
where:
=
energy consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places.
=
energy consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.
For gas-fired household tumble driers, the energy consumption for the standard cotton programme at full and partial load is calculated in kWh and rounded to two decimal places, as:
where:
=
gas consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places.
=
gas consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.
=
auxiliary electricity consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places.
=
auxiliary electricity consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.
=
2,5.
For gas-fired household tumble driers, the energy consumption on gas for the standard cotton programme at full and partial load for the information in Annex II, III and IV is calculated in kWhGas and rounded to two decimal places, as:
AE C(Gas) = 160 × (3 × Egdry + 4 × Egdry1/2 )/7
For gas-fired household tumble driers, the energy consumption on electricity for the standard cotton programme at full and partial load for the information in Annex II, III and IV is calculated in kWh and rounded to two decimal places, as:
AEC(Gas)el = 160 × (3 × Egdry,a + 4 × Egdry1/2,a )/7 + ((Pl × Tl × 160) + Po × [525 600 – (Tt × 160) – (Tl × 160)])/60 × 1 000
The condensation efficiency of a programme is the ratio between the mass of moisture condensed and collected in the container of a condenser household tumble drier and the mass of moisture removed from the load by the programme, the latter being the difference between the mass of the wet test load before drying and the mass of the test load after drying. For calculating the weighted condensation efficiency, the average condensation efficiency for the standard cotton programme at both full and partial load is considered.
The weighted condensation efficiency (Ct ) of a programme is calculated as a percentage and rounded to the nearest whole percent as:
Ct = (3 × Cdry + 4 × Cdry½ )/7
where:
=
average condensation efficiency of the standard cotton programme at full load.
=
average condensation efficiency of the standard cotton programme at partial load.
The average condensation efficiency C is calculated from the condensation efficiencies of test runs and expressed as a percentage:
where:
is the number of test runs, comprising at least four valid test runs for the selected programme.
is the test run number.
is the mass of water collected in the condenser reservoir during test run j.
is the mass of the wet test load before drying.
is the mass of the test load after drying.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: