1. Introductory Text

  2. Article 1.Subject matter and scope

  3. Article 2.Definitions

  4. Article 3.Responsibilities of suppliers

  5. Article 4.Responsibilities of dealers

  6. Article 5.Measurement methods

  7. Article 6.Verification procedure for market surveillance purposes

  8. Article 7.Revision

  9. Article 8.Repeal

  10. Article 9.Transitional provisions

  11. Article 10.Entry into force and application

  12. Signature

    1. ANNEX I

      Label

      1. 1. LABEL FOR AIR-VENTED HOUSEHOLD TUMBLE DRIER

        1. 1.1. The following information shall be included in the label for...

        2. 1.2. The design of the label for air vented household tumble...

      2. 2. LABEL FOR CONDENSER HOUSEHOLD TUMBLE DRIER

        1. 2.1. In addition to the information listed in point 1.1, the...

        2. 2.2. The design of the label for condenser household tumble driers...

      3. 3. LABEL FOR GAS-FIRED HOUSEHOLD TUMBLE DRIER

        1. 3.1. The information listed in point 1.1 shall be included in...

        2. 3.2. The design of the label for gas fired household tumble...

      4. 4. LABEL DESIGN

        1. 4.1. For air vented household tumble driers, the design of the...

        2. 4.2. For condenser household tumble driers, the design of the label...

        3. 4.3. For gas fired household tumble driers, the design of the...

    2. ANNEX II

      Product Fiche

      1. 1. The information in the product fiche of household tumble driers...

      2. 2. One product fiche may cover a number of household tumble...

      3. 3. The information contained in the fiche may be given in...

    3. ANNEX III

      Technical documentation

      1. 1. The technical documentation referred to in Article 3(c) shall include:...

      2. 2. Where the information included in the technical documentation for a...

    4. ANNEX IV

      Information to be provided in cases where end-users cannot be expected to see the product displayed

      1. 1. The information referred to in Article 4(b) shall be provided...

      2. 2. Where other information contained in the product fiche is also...

      3. 3. The size and font in which all the information referred...

    5. ANNEX V

      Product compliance verification by market surveillance authorities

      1. The verification tolerances set out in this Annex relate only...

      2. When verifying the compliance of a product model with the...

      3. The Member State authorities shall verify one single unit of...

      4. Member States' authorities shall use measurement procedures which take into...

      5. The Member State authorities shall only apply the verification tolerances...

      6. Table 1 Verification tolerances Parameters Verification tolerances Weighted annual energy...

    6. ANNEX VI

      Energy efficiency classes and condensation efficiency classes

      1. 1. ENERGY EFFICIENCY CLASSES

      2. 2. CONDENSATION EFFICIENCY CLASSES

    7. ANNEX VII

      Method for calculating the Energy Efficiency Index and the weighted condensation efficiency

      1. 1. CALCULATION OF THE ENERGY EFFICIENCY INDEX

      2. 2. CALCULATION FOR THE PRODUCT INFORMATION DESCRIBED IN ‘ANNEX II PRODUCT...

      3. 3. CALCULATION OF THE WEIGHTED CONDENSATION EFFICIENCY

    8. ANNEX VIII

      Information to be provided in the case of sale, hire or hire-purchase through the internet

      1. (1) For the purpose of points 2 to 5 of this...

      2. (2) The appropriate label made available by suppliers in accordance with...

      3. (3) The image used for accessing the label in the case...

      4. (4) In the case of nested display, the sequence of display...

      5. (5) The appropriate product fiche made available by suppliers in accordance...