Emissions from combustion shall be monitored in accordance with section 1 of this Annex. Process emissions from raw meal components shall be monitored in accordance with section 4 of Annex II based on the carbonate content of the process input (calculation Method A) or on the amount of clinker produced (calculation Method B). Carbonates to be taken into account shall at least include CaCO3, MgCO3 and FeCO3.
CO2 emissions related to dust removed from the process and organic carbon in the raw materials shall be added in accordance with subsections C and D of this section of Annex IV.
Where cement kiln dust (CKD) and bypass dust leave the kiln system the operator shall not consider the related raw material as process input, but calculate emissions from CKD in accordance with subsection C.
Unless the raw meal is characterised, the operator shall apply the uncertainty requirements for activity data separately to each of the relevant carbon-bearing kiln inputs, avoiding double counting or omissions from returned or by-passed materials. Where activity data is determined based on the clinker produced, the net amount of raw meal may be determined by means of a site-specific empirical raw meal/clinker ratio. That ratio shall be updated at least once per year applying industry best practice guidelines.
The operator shall determine activity data as the clinker production [t] over the reporting period in one of the following ways:
by direct weighing of clinker;
based on cement deliveries, by material balance taking into account dispatch of clinker, clinker supplies as well as clinker stock variation, using the following formula:
clinker produced [t] = ((cement deliveries [t] – cement stock variation [t]) * clinker/cement ratio [t clinker/t cement]) – (clinker supplied [t]) + (clinker dispatched [t]) – (clinker stock variation [t]).
The operator shall either derive the cement/clinker ratio for each of the different cement products based on the provisions of Articles 32 to 35 or calculate the ratio from the difference of cement deliveries and stock changes and all materials used as additives to the cement including by-pass dust and cement kiln dust.
By way of derogation from section 4 of Annex II, tier 1 for the emission factor shall be defined as follows:
:
The operator shall apply an emission factor of 0,525 t CO2/t clinker.