ANNEX I U.K. PART 21 Certification of aircraft and related products, parts and appliances, and of design and production organisations

SECTION A U.K. TECHNICAL REQUIREMENTS

SUBPART B — TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES U.K.

21.A.18 Designation of applicable environmental protection requirements and certification specifications U.K.

[F1 (a) The applicable noise requirements for the issue of a type certificate for an aircraft are prescribed according to the provisions of Chapter 1 of Annex 16, Volume I, Part II to the Chicago Convention and: U.K.

1.

for subsonic jet aeroplanes, in Volume I, Part II, Chapters 2, 3, 4 and 14, as applicable;

2.

for propeller-driven aeroplanes, in Volume I, Part II, Chapters 3, 4, 5, 6, 10 and 14, as applicable;

3.

for helicopters, in Volume I, Part II, Chapters 8 and 11, as applicable;

4.

for supersonic aeroplanes, in Volume I, Part II, Chapter 12, as applicable; and

5.

for tilt-rotors, in Volume I, Part II, Chapter 13, as applicable.]

Textual Amendments

F1 Substituted by Commission Regulation (EU) 2016/5 of 5 January 2016 amending Regulation (EU) No 748/2012 as regards the implementation of essential requirements for environmental protection (Text with EEA relevance).

(b) The applicable emission requirements for the issue of a type-certificate for an aircraft and engine are prescribed in Annex 16 to the Chicago Convention: U.K.

1.

for prevention of intentional fuel venting, in Volume II, Part II, Chapter 2;

2.

for emissions of turbo-jet and turbofan engines intended for propulsion only at subsonic speeds, in Volume II, Part III, Chapter 2; and

3.

for emissions of turbo-jet and turbofan engines intended for propulsion only at supersonic speeds, in Volume II, Part III, Chapter 3.

(c) The Agency shall issue, in accordance with Article 19 of Regulation (EC) No 216/2008, certification specifications providing for acceptable means to demonstrate compliance with the noise and the emission requirements laid down in points (a) and (b) respectively. U.K.