Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.

  1. Introductory Text

  2. Article 1.General provision

  3. Article 2.Forms

  4. Article 3.Technical specifications with regard to forms

  5. Article 4.Regulation (EC) No 865/2006 is amended as follows: Articles 2...

  6. Article 5.This Regulation shall enter into force on the twentieth day...

  7. Signature

    1. ANNEX I

      2. Instructions and explanations

        1. 1. Full name and address of the actual (re-)exporter, not of...

        2. 2. The period of validity of an export permit or re-export...

        3. 3. Full name and address of the actual importer, not of...

        4. 5. To be left blank in the case of a personal...

        5. 6. For live specimens of Annex A species other than captive...

        6. 8. Description must be as precise as possible and include a...

        7. 9/10. Use the units of quantity and/or net mass in accordance...

        8. 11. Enter the number of the CITES Appendix (I, II or...

        9. 12. Enter the letter of the Annex to Regulation (EC) No...

        10. 13. Use one of the following codes to indicate the source:...

        11. 14. Use one of the following codes to indicate the purpose...

        12. 15 to 17. The country of origin is the country where the specimens...

        13. 18 to 20. The country of last re-export is, in the case of...

        14. 21. The scientific name must be in accordance with the standard...

        15. 23 to 25. For official use only.

        16. 26. The importer/(re)exporter or his agent must, where appropriate, indicate the...

        17. 27. To be completed by the customs office of introduction into...

      4. Instructions and explanations

        1. 1. Full name and address of the actual (re-)exporter, not of...

        2. 2. The period of validity of an export permit or re-export...

        3. 3. Full name and address of the actual importer, not of...

        4. 5. To be left blank in the case of a personal...

        5. 6. For live specimens of Annex A species other than captive...

        6. 8. Description must be as precise as possible and include a...

        7. 9/10. Use the units of quantity and/or net mass in accordance...

        8. 11. Enter the number of the CITES Appendix (I, II or...

        9. 12. Enter the letter of the Annex to Regulation (EC) No...

        10. 13. Use one of the following codes to indicate the source:...

        11. 14. Use one of the following codes to indicate the purpose...

        12. 15 to 17. The country of origin is the country where the specimens...

        13. 18 to 20. The country of last re-export is, in the case of...

        14. 21. The scientific name must be in accordance with the standard...

        15. 23 to 25. For official use only.

        16. 26. The importer/(re)exporter or his agent must, where appropriate, indicate the...

        17. 27. To be completed by the customs office of introduction into...

      6. Instructions and explanations

        1. 1. Full name and address of the actual (re-)exporter, not of...

        2. 2. The period of validity of an export permit or re-export...

        3. 3. Full name and address of the actual importer, not of...

        4. 5. To be left blank in the case of a personal...

        5. 6. For live specimens of Annex A species other than captive...

        6. 8. Description must be as precise as possible and include a...

        7. 9/10. Use the units of quantity and/or net mass in accordance...

        8. 11. Enter the number of the CITES Appendix (I, II or...

        9. 12. Enter the letter of the Annex to Regulation (EC) No...

        10. 13. Use one of the following codes to indicate the source:...

        11. 14. Use one of the following codes to indicate the purpose...

        12. 15 to 17. The country of origin is the country where the specimens...

        13. 18 to 20. The country of last re-export is, in the case of...

        14. 21. The scientific name must be in accordance with the standard...

        15. 23 to 25. For official use only.

        16. 26. The importer/(re)exporter or his agent must, where appropriate, indicate the...

        17. 27. To be completed by the customs office of introduction into...

      9. Instructions and explanations

        1. 1. Full name and address of the actual (re-)exporter, not of...

        2. 2. Not applicable.

        3. 3. Full name and address of the actual importer, not of...

        4. 5. To be left blank in the case of a personal...

        5. 6. To be completed only on the application form in the...

        6. 8. Description must be as precise as possible and include a...

        7. 9/10. Use the units of quantity and/or net mass in accordance...

        8. 11. Enter the number of the CITES Appendix (I, II or...

        9. 12. Enter the letter of the Annex to Regulation (EC) No...

        10. 13. Use one of the following codes to indicate the source:...

        11. 14. Use one of the following codes to indicate the purpose...

        12. 15 to 17. The country of origin is the country where the specimens...

        13. 18 to 20. The country of last re-export is, in the case of...

        14. 21. The scientific name must be in accordance with the standard...

        15. 23. Provide as many details as possible and justify any omissions...

    2. ANNEX II

      2. Instructions and explanations

        1. 1. Enter full name and address of importer or authorised representative....

        2. 4. The country of origin is the country where the specimens...

        3. 5. Only applies where the country from which the specimens are...

        4. 6. Description must be as precise as possible.

        5. 9. The scientific name must be the name used in Annexes...

        6. 10. Enter III for species listed in Appendix III to CITES....

        7. 12. Enter the letters (C or D) of the Annex to...

        8. 13. The importer has to submit the signed original (form 1)...

        9. 14. The customs office shall send the stamped original (form 1)...

      4. Instructions and explanations

        1. 1. Enter full name and address of importer or authorised representative....

        2. 4. The country of origin is the country where the specimens...

        3. 5. Only applies where the country from which the specimens are...

        4. 6. Description must be as precise as possible.

        5. 9. The scientific name must be the name used in Annexes...

        6. 10. Enter III for species listed in Appendix III to CITES....

        7. 12. Enter the letters (C or D) of the Annex to...

        8. 13. The importer has to submit the signed original (form 1)...

        9. 14. The customs office shall send the stamped original (form 1)...

    3. ANNEX III

      2. Instructions and explanations

        1. 1. A unique number should be generated by the issuing management...

        2. 2. The date of expiry of the document may not be...

        3. 3. Complete the full name, permanent address and country of the...

        4. 4. The name, address and country of the issuing management authority...

        5. 5. This block has been pre-printed to indicate the validity of...

        6. 6. This block has been pre-printed to indicate that cross-border movement...

        7. 7. This block has been pre-printed with the code Q for...

        8. 8. Where appropriate, indicate the number of the security stamp affixed...

        9. 9. The scientific name must be in accordance with the standard...

        10. 10. Describe, as precisely as possible, the specimen covered by the...

        11. 11. Indicate the total number of specimens. In the case of...

        12. 12. Enter the number of the Appendix to the Convention (I,...

        13. 13. Enter the letter of the Annex to Regulation (EC) No...

        14. 14. Use the codes below to indicate the source. This certificate...

        15. 15/16. The country of origin is the country where the specimens...

        16. 17. This block must contain the exhibition registration number.

        17. 18. Enter the date of acquisition only for specimens which were...

        18. 19. To be completed by the official who issues the certificate....

        19. 20. This block may be used to refer to national legislation...

        20. 21. This block has been pre-printed to refer to the attached...

      5. Instructions and explanations

        1. 3. Complete the full name, permanent address and country of the...

        2. 8. Where appropriate, indicate the number of the security stamp affixed...

        3. 9. The scientific name must be in accordance with the standard...

        4. 10. Describe, as precisely as possible, the specimen covered by the...

        5. 11. Indicate the total number of specimens. In the case of...

        6. 12. Enter the number of the Appendix to the Convention (I,...

        7. 13. Enter the letter of the Annex to Regulation (EC) No...

        8. 14. Use the codes below to indicate the source. This certificate...

        9. 15/16. The country of origin is the country where the specimens...

        10. 17. This block must contain the exhibition registration number.

        11. 18. Enter the date of acquisition only for specimens which were...

        12. 19. Provide as many details as possible and justify any omissions...

    4. ANNEX IV

    5. ANNEX V

      2. Instructions and explanations

        1. 1. Full name and address of the holder of the certificate,...

        2. 2. Only to be completed in case the import permit for...

        3. 4. Description must be as precise as possible and include a...

        4. 5/6. Use the units of quantity and/or net mass in accordance...

        5. 7. Enter the number of the CITES Appendix (I, II or...

        6. 8. Enter the letter of the Annex to Regulation (EC) No...

        7. 9. Use one of the following codes to indicate the source:...

        8. 10 to 12. The country of origin is the country where the specimens...

        9. 13 to 15. The Member State of import is, where applicable, the Member...

        10. 16. The scientific name must be in accordance with the standard...

      4. Instructions and explanations

        1. 1. Full name and address of the applicant for the certificate,...

        2. 2. To be completed only on the application form in the...

        3. 4. Description must be as precise as possible and include a...

        4. 5/6. Use the units of quantity and/or net mass in accordance...

        5. 7. Enter the number of the CITES Appendix (I, II or...

        6. 8. Enter the letter of the Annex to Regulation (EC) No...

        7. 9. Use one of the following codes to indicate the source:...

        8. 10 to 12. The country of origin is the country where the specimens...

        9. 13 to 15. The Member State of import is, where applicable, the Member...

        10. 16. The scientific name must be in accordance with the standard...

        11. 18. Provide as many details as possible and justify any omissions...

    6. ANNEX VI