ANNEX IIAUTHORITY REQUIREMENTS FOR AIR OPERATIONS
[PART-ARO]
SUBPART GENGENERAL REQUIREMENTS
SECTION IGeneral
ARO.GEN.115Oversight documentation
The competent authority shall provide all legislative acts, standards, rules, technical publications and related documents to relevant personnel in order to allow them to perform their tasks and to discharge their responsibilities.
ARO.GEN.120Means of compliance
(a)
The Agency shall develop acceptable means of compliance (AMC) that may be used to establish compliance with Regulation (EC) No 216/2008 and its Implementing Rules. When the AMC are complied with, the related requirements of the Implementing Rules are met.
(b)
Alternative means of compliance may be used to establish compliance with the Implementing Rules.
(c)
The competent authority shall establish a system to consistently evaluate that all alternative means of compliance used by itself or by organisations and persons under its oversight allow the establishment of compliance with Regulation (EC) No 216/2008 and its Implementing Rules.
(d)The competent authority shall evaluate all alternative means of compliance proposed by an organisation in accordance with ORO.GEN.120 (b) by analysing the documentation provided and, if considered necessary, conducting an inspection of the organisation.
When the competent authority finds that the alternative means of compliance are in accordance with the Implementing Rules, it shall without undue delay:
- (1)
notify the applicant that the alternative means of compliance may be implemented and, if applicable, amend the approvalF4, specialised operation authorisation or certificate of the applicant accordingly; and
- (2)
notify the Agency of their content, including copies of all relevant documentation;
- (3)
inform other Member States about alternative means of compliance that were accepted.
(e)When the competent authority itself uses alternative means of compliance to achieve compliance with Regulation (EC) No 216/2008 and its Implementing Rules it shall:
- (1)
make them available to all organisations and persons under its oversight; and
- (2)
without undue delay notify the Agency.
The competent authority shall provide the Agency with a full description of the alternative means of compliance, including any revisions to procedures that may be relevant, as well as an assessment demonstrating that the Implementing Rules are met.
ARO.GEN.125Information to the Agency
(a)
The competent authority shall without undue delay notify the Agency in case of any significant problems with the implementation of Regulation (EC) No 216/2008 and its Implementing Rules.
(b)
The competent authority shall provide the Agency with safety-significant information stemming from the occurrence reports it has received.
ARO.GEN.135Immediate reaction to a safety problem
(a)
Without prejudice to Directive 2003/42/EC of the European Parliament and of the Council6 the competent authority shall implement a system to appropriately collect, analyse and disseminate safety information.
(b)
The Agency shall implement a system to appropriately analyse any relevant safety information received and without undue delay provide to Member States and the Commission any information, including recommendations or corrective actions to be taken, necessary for them to react in a timely manner to a safety problem involving products, parts, appliances, persons or organisations subject to Regulation (EC) No 216/2008 and its Implementing Rules.
(c)
Upon receiving the information referred to in (a) and (b), the competent authority shall take adequate measures to address the safety problem.
(d)
Measures taken under (c) shall immediately be notified to all persons or organisations which need to comply with them under Regulation (EC) No 216/2008 and its Implementing Rules. The competent authority shall also notify those measures to the Agency and, when combined action is required, the other Member States concerned.
SECTION IIManagement
ARO.GEN.200Management system
(a)The competent authority shall establish and maintain a management system, including as a minimum:
- (1)
documented policies and procedures to describe its organisation, means and methods to achieve compliance with Regulation (EC) No 216/2008 and its Implementing Rules. The procedures shall be kept up to date and serve as the basic working documents within that competent authority for all related tasks;
- (2)
a sufficient number of personnel to perform its tasks and discharge its responsibilities. Such personnel shall be qualified to perform their allocated tasks and have the necessary knowledge, experience, initial and recurrent training to ensure continuing competence. A system shall be in place to plan the availability of personnel, in order to ensure the proper completion of all tasks;
- (3)
adequate facilities and office accommodation to perform the allocated tasks;
- (4)
a function to monitor compliance of the management system with the relevant requirements and adequacy of the procedures including the establishment of an internal audit process and a safety risk management process. Compliance monitoring shall include a feedback system of audit findings to the senior management of the competent authority to ensure implementation of corrective actions as necessary; and
- (5)
a person or group of persons, ultimately responsible to the senior management of the competent authority for the compliance monitoring function.
(b)
The competent authority shall, for each field of activity, including management system, appoint one or more persons with the overall responsibility for the management of the relevant task(s).
(c)
The competent authority shall establish procedures for participation in a mutual exchange of all necessary information and assistance with other competent authorities concerned including on all findings raised and follow-up actions taken as a result of oversight of persons and organisations exercising activities in the territory of a Member State, but certifiedF4or authorised byF3or making declarations to the competent authority of another Member State or the Agency.
(d)
A copy of the procedures related to the management system and their amendments shall be made available to the Agency for the purpose of standardisation.
ARO.GEN.205Allocation of tasks to qualified entities
(a)Tasks related to the initial certificationF4, specialised operation authorisation or continuing oversight of persons or organisations subject to Regulation (EC) No 216/2008 and its Implementing Rules shall be allocated by Member States only to qualified entities. When allocating tasks, the competent authority shall ensure that it has:
- (1)
put a system in place to initially and continuously assess that the qualified entity complies with Annex V to Regulation (EC) No 216/2008.
This system and the results of the assessments shall be documented.
- (2)
established a documented agreement with the qualified entity, approved by both parties at the appropriate management level, which clearly defines:
- (i)
the tasks to be performed;
- (ii)
the declarations, reports and records to be provided;
- (iii)
the technical conditions to be met in performing such tasks;
- (iv)
the related liability coverage; and
- (v)
the protection given to information acquired in carrying out such tasks.
- (i)
(b)
The competent authority shall ensure that the internal audit process and safety risk management process required by ARO.GEN.200(a)(4) covers all certificationF4, authorisationor continuing oversight tasks performed on its behalf.
ARO.GEN.210Changes in the management system
(a)
The competent authority shall have a system in place to identify changes that affect its capability to perform its tasks and discharge its responsibilities as defined in Regulation (EC) No 216/2008 and its Implementing Rules. This system shall enable it to take action as appropriate to ensure that its management system remains adequate and effective.
(b)
The competent authority shall update its management system to reflect any change to Regulation (EC) No 216/2008 and its Implementing Rules in a timely manner, so as to ensure effective implementation.
(c)
The competent authority shall notify the Agency of changes affecting its capability to perform its tasks and discharge its responsibilities as defined in Regulation (EC) No 216/2008 and its Implementing Rules.
ARO.GEN.220Record-keeping
(a)The competent authority shall establish a system of record-keeping providing for adequate storage, accessibility and reliable traceability of:
- (1)
the management system’s documented policies and procedures;
- (2)
training, qualification and authorisation of its personnel;
- (3)
the allocation of tasks, covering the elements required by ARO.GEN.205 as well as the details of tasks allocated;
- (4)
certification processes and continuing oversight of certified organisations;
- (4a)
F4the process of authorisation of a high risk commercial specialised operation and continuing oversight of an authorisation holder;
- (5)
F3declaration processes and continuing oversight of declared organisations;
- (6)
details of training courses provided by certified organisations, and if applicable, records relating to FSTDs used for such training;
- (7)
F1oversight of persons and organisations exercising activities within the territory of the Member State, but overseen, certified or authorised by the competent authority of another Member State or the Agency, as agreed between these authorities;
- (8)
F5oversight of operations of other-than complex motor-powered aircraft by non-commercial operators;
- (9)
the evaluation and notification to the Agency of alternative means of compliance proposed by organisations subject to certificationF4, or authorisation and the assessment of alternative means of compliance used by the competent authority itself;
- (10)
findings, corrective actions and date of action closure;
- (11)
enforcement measures taken;
- (12)
safety information and follow-up measures; and
- (13)
the use of flexibility provisions in accordance with Article 14 of Regulation (EC) No 216/2008.
F1(b)
The competent authority shall maintain a list of all organisation certificates and specialised operations authorisations it issued as well as declarations it received.
(c)
All records shall be kept for the minimum period specified in this Regulation. In the absence of such indication, records shall be kept for a minimum period of five years subject to applicable data protection law.
SECTION IIIOversight, certification and enforcement
ARO.GEN.300Oversight
F2(a)The competent authority shall verify:
- (1)
F1compliance with the requirements applicable to organisations or type of operations prior to the issue of a certificate, approval or authorisation, as applicable;
- (2)
continued compliance with the applicable requirements of organisations it has certified, specialised operations it has authorised and organisations from whom it received a declaration;
- (3)
F5continued compliance with the applicable requirements of non-commercial operators of other-than complex motor-powered aircraft; and
- (4)
implementation of appropriate safety measures mandated by the competent authority as defined in ARO.GEN.135(c) and (d).
(b)This verification shall:
- (1)
be supported by documentation specifically intended to provide personnel responsible for safety oversight with guidance to perform their functions;
- (2)
provide the persons and organisations concerned with the results of safety oversight activity;
- (3)
be based on audits and inspections, including ramp and unannounced inspections; and
- (4)
provide the competent authority with the evidence needed in case further action is required, including the measures foreseen by ARO.GEN.350 and ARO.GEN.355.
(c)
The scope of oversight defined in (a) and (b) shall take into account the results of past oversight activities and the safety priorities.
(d)
Without prejudice to the competences of the Member States and to their obligations as set out in ARO.RAMP, the scope of the oversight of activities performed in the territory of a Member State by persons or organisations established or residing in another Member State shall be determined on the basis of the safety priorities, as well as of past oversight activities.
(e)
Where the activity of a person or organisation involves more than one Member State or the Agency, the competent authority responsible for the oversight under (a) may agree to have oversight tasks performed by the competent authority(ies) of the Member State(s) where the activity takes place or by the Agency. Any person or organisation subject to such agreement shall be informed of its existence and of its scope.
(f)
The competent authority shall collect and process any information deemed useful for oversight, including for ramp and unannounced inspections.
ARO.GEN.305Oversight programme
(a)
The competent authority shall establish and maintain an oversight programme covering the oversight activities required by ARO.GEN.300 and by ARO.RAMP.
(b)For organisations certified by the competent authority, the oversight programme shall be developed taking into account the specific nature of the organisation, the complexity of its activities, the results of past certification and/or oversight activities required by ARO.GEN and ARO.RAMP and shall be based on the assessment of associated risks. It shall include within each oversight planning cycle:
- (1)
audits and inspections, including ramp and unannounced inspections as appropriate; and
- (2)
meetings convened between the accountable manager and the competent authority to ensure both remain informed of significant issues.
(c)For organisations certified by the competent authority an oversight planning cycle not exceeding 24 months shall be applied.
The oversight planning cycle may be reduced if there is evidence that the safety performance of the organisation has decreased.
The oversight planning cycle may be extended to a maximum of 36 months if the competent authority has established that, during the previous 24 months:
- (1)
the organisation has demonstrated an effective identification of aviation safety hazards and management of associated risks;
- (2)
the organisation has continuously demonstrated under ORO.GEN.130 that it has full control over all changes;
- (3)
no level 1 findings have been issued; and
- (4)
all corrective actions have been implemented within the time period accepted or extended by the competent authority as defined in ARO.GEN.350(d)(2).
The oversight planning cycle may be further extended to a maximum of 48 months if, in addition to the above, the organisation has established, and the competent authority has approved, an effective continuous reporting system to the competent authority on the safety performance and regulatory compliance of the organisation itself.
F1(d)
For organisations declaring their activity to the competent authority, the oversight programme shall be based on the specific nature of the organisation, the complexity of its activities and the data of past oversight activities and the assessment of risks associated with the type of activity carried out. It shall include audits and inspections, including ramp and unannounced inspections, as appropriate.
F4(d1)
For organisations holding a specialised operations authorisation, the oversight programme shall be established in accordance with (d) and shall also take into account the past and current authorisation process and the validity period of the authorisation.
F2(e)
For persons holding a licence, certificate, rating, or attestation issued by the competent authority the oversight programme shall include inspections, including unannounced inspections, as appropriate.
F2(f)
The oversight programme shall include records of the dates when audits, inspections and meetings are due and when such audits, inspections and meetings have been carried out.
ARO.GEN.310Initial certification procedure — organisations
(a)
Upon receiving an application for the initial issue of a certificate for an organisation, the competent authority shall verify the organisation’s compliance with the applicable requirements. This verification may take into account the statement referred to in ORO.AOC.100(b).
(b)
When satisfied that the organisation is in compliance with the applicable requirements, the competent authority shall issue the certificate(s), as established in Appendices I and II. The certificate(s) shall be issued for an unlimited duration. The privileges and scope of the activities that the organisation is approved to conduct shall be specified in the terms of approval attached to the certificate(s).
(c)
To enable an organisation to implement changes without prior competent authority approval in accordance with ORO.GEN.130, the competent authority shall approve the procedure submitted by the organisation defining the scope of such changes and describing how such changes will be managed and notified.
ARO.GEN.330Changes — organisations
(a)Upon receiving an application for a change that requires prior approval, the competent authority shall verify the organisation’s compliance with the applicable requirements before issuing the approval.
The competent authority shall prescribe the conditions under which the organisation may operate during the change, unless the competent authority determines that the organisation’s certificate needs to be suspended.
When satisfied that the organisation is in compliance with the applicable requirements, the competent authority shall approve the change.
(b)
Without prejudice to any additional enforcement measures, when the organisation implements changes requiring prior approval without having received competent authority approval as defined in (a), the competent authority shall suspend, limit or revoke the organisation’s certificate.
(c)For changes not requiring prior approval, the competent authority shall assess the information provided in the notification sent by the organisation in accordance with ORO.GEN.130 to verify compliance with the applicable requirements. In case of any non-compliance, the competent authority shall:
- (1)
notify the organisation about the non-compliance and request further changes;
- (2)
in case of level 1 or level 2 findings, act in accordance with ARO.GEN.350.
F3ARO.GEN.345Declaration — organisations
(a)
Upon receiving a declaration from an organisation carrying out or intending to carry out activities for which a declaration is required, the competent authority shall verify that the declaration contains all the information required by Part-ORO and shall acknowledge receipt of the declaration to the organisation.
(b)
If the declaration does not contain the required information, or contains information that indicates non-compliance with applicable requirements, the competent authority shall notify the organisation about the non-compliance and request further information. If deemed necessary the competent authority shall carry out an inspection of the organisation. If the non-compliance is confirmed, the competent authority shall take action as defined in ARO.GEN.350.
ARO.GEN.350Findings and corrective actions — organisations
(a)
The competent authority for oversight in accordance with ARO.GEN.300(a) shall have a system to analyse findings for their safety significance.
F1(b)A level 1 finding shall be issued by the competent authority when any significant non-compliance is detected with the applicable requirements of Regulation (EC) No 216/2008 and its Implementing Rules, with the organisation’s procedures and manuals or with the terms of an approval, certificate, specialised operation authorisation or with the content of a declaration which lowers safety or seriously hazards flight safety.
The level 1 findings shall include:
- (1)
failure to give the competent authority access to the organisation’s facilities as defined in ORO.GEN.140 during normal operating hours and after two written requests;
- (2)
obtaining or maintaining the validity of the organisation certificateF4or specialised operations authorisation by falsification of submitted documentary evidence;
- (3)
evidence of malpractice or fraudulent use of the organisation certificateF4or specialised operations authorisation; and
- (4)
the lack of an accountable manager.
F1(c)
A level 2 finding shall be issued by the competent authority when any non-compliance is detected with the applicable requirements of Regulation (EC) No 216/2008 and its Implementing Rules, with the organisation’s procedures and manuals or with the terms of an approval, certificate, specialised operation authorisation or with the content of a declaration which could lower safety or hazard flight safety.
(d)When a finding is detected during oversight or by any other means, the competent authority shall, without prejudice to any additional action required by Regulation (EC) No 216/2008 and its Implementing Rules, communicate the finding to the organisation in writing and request corrective action to address the non-compliance(s) identified. Where relevant, the competent authority shall inform the State in which the aircraft is registered.
- (1)
In the case of level 1 findings the competent authority shall take immediate and appropriate action to prohibit or limit activities, and if appropriate, it shall take action to revoke the certificate F4, specialised operations authorisation or specific approval or to limit or suspend it in whole or in part, depending upon the extent of the level 1 finding, until successful corrective action has been taken by the organisation.
- (2)
In the case of level 2 findings, the competent authority shall:
- (i)
grant the organisation a corrective action implementation period appropriate to the nature of the finding that in any case initially shall not be more than three months. At the end of this period, and subject to the nature of the finding, the competent authority may extend the three-month period subject to a satisfactory corrective action plan agreed by the competent authority; and
- (ii)
assess the corrective action and implementation plan proposed by the organisation and, if the assessment concludes that they are sufficient to address the non-compliance(s), accept these.
- (i)
- (3)
Where an organisation fails to submit an acceptable corrective action plan, or to perform the corrective action within the time period accepted or extended by the competent authority, the finding shall be raised to a level 1 finding and action taken as laid down in (d)(1).
- (4)
The competent authority shall record all findings it has raised or that have been communicated to it and, where applicable, the enforcement measures it has applied, as well as all corrective actions and date of action closure for findings.
(e)
Without prejudice to any additional enforcement measures, when the authority of a Member State acting under the provisions of ARO.GEN.300 (d) identifies any non-compliance with the applicable requirements of Regulation (EC) No 216/2008 and its Implementing Rules by an organisation certified byF4, or authorised byF3or declaring its activity to the competent authority of another Member State or the Agency, it shall inform that competent authority and provide an indication of the level of finding.
ARO.GEN.355Findings and enforcement measures — persons
(a)
If, during oversight or by any other means, evidence is found by the competent authority responsible for oversight in accordance with ARO.GEN.300(a) that shows a non-compliance with the applicable requirements by a person holding a licence, certificate, rating or attestation issued in accordance with Regulation (EC) No 216/2008 and its Implementing Rules, the competent authority shall act in accordance with ARA.GEN.355(a) to (d) of Annex VI (Part-ARA) to Commission F1Regulation (EU) No 1178/20117.
(b)
If, during oversight or by any other means, evidence is found showing a non-compliance with the applicable requirements by a person subject to the requirements laid down in Regulation (EC) No 216/2008 and its Implementing Rules and not holding a licence, certificate, rating or attestation issued in accordance with that Regulation and its Implementing Rules, the competent authority that identified the non-compliance shall take any enforcement measures necessary to prevent the continuation of that non-compliance.
F4ARO.GEN.360Findings and enforcement measures — all operators
If, during oversight or by any other means, evidence is found showing a non-compliance with the applicable requirements by an operator subject to the requirements laid down in Regulation (EC) No 216/2008 and its Implementing Rules, the competent authority that identified the non-compliance shall take any enforcement measures necessary to prevent the continuation of that non-compliance.