Textual Amendments
the number of cabin crew members established during the aircraft certification process in accordance with the applicable certification specifications, for the aircraft cabin configuration used by the operator; or
if the number under (1) has not been established, the number of cabin crew established during the aircraft certification process for the maximum certified passenger seating configuration reduced by 1 for every whole multiple of 50 passenger seats of the aircraft cabin configuration used by the operator falling below the maximum certified seating capacity; or
one cabin crew member for every 50, or fraction of 50, passenger seats installed on the same deck of the aircraft to be operated.
are at least 18 years of age;
have been assessed, in accordance with the applicable requirements of Annex IV (Part-MED) to Regulation (EU) No 1178/2011, as physically and mentally fit to perform their duties and discharge their responsibilities safely; and
have successfully completed all applicable training and checking required by this Subpart and are competent to perform the assigned duties in accordance with the procedures specified in the operations manual.
the total number of aircraft types and variants operated; and
the applicable flight and duty time limitations and rest requirements.
conducted in a structured and realistic manner; and
performed by personnel appropriately qualified for the subject to be covered.
shall be provided with an initial training course as specified in CC.TRA.220 of that Annex; and
shall successfully undergo the associated examination before undertaking other training required by this Subpart.
first assigned by the operator to operate as a cabin crew member; or
assigned by that operator to operate on another aircraft type.
Textual Amendments
F4 Substituted by Commission Regulation (EU) No 71/2014 of 27 January 2014 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to Air Operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance).
involve training and practice on a representative training device or on the actual aircraft; and
cover at least the following aircraft type specific training elements:
aircraft description as relevant to cabin crew duties;
all safety equipment and systems installed relevant to cabin crew duties;
operation and actual opening, by each cabin crew member, of each type or variant of normal and emergency doors and exits in the normal and emergency modes;
demonstration of the operation of the other exits including flight crew compartment windows;
fire and smoke protection equipment where installed;
evacuation slide training, where fitted;
operation of the seat, restraint system and oxygen system equipment relevant to pilot incapacitation.
involve training and practice on a representative training device or on the actual aircraft;
include training in the operator’s standard operating procedures for cabin crew members to be first assigned to duties by the operator;
cover at least the following operator specific training elements as relevant to the aircraft type to be operated:
description of the cabin configuration;
location, removal and use of all portable safety and emergency equipment carried on-board;
all normal and emergency procedures;
passenger handling and crowd control;
fire and smoke training including the use of all related fire-fighting and protective equipment representative of that carried on-board;
evacuation procedures;
pilot incapacitation procedures;
applicable security requirements and procedures;
crew resource management.
a variant of an aircraft type currently operated; or
a currently operated aircraft type or variant with different:
safety equipment;
safety and emergency equipment location; or
normal and emergency procedures.
be determined as necessary on the basis of a comparison with the training programme completed by the cabin crew member, in accordance with ORO.CC.125(c) and (d), for the relevant aircraft type; and
involve training and practice in a representative training device or the actual aircraft as relevant to the difference training element to be covered.
After completion of aircraft type specific training and operator conversion training on an aircraft type, each cabin crew member shall complete appropriate supervised familiarisation on the type before being assigned to operate as a member of the minimum number of cabin crew required in accordance with ORO.CC.100.
Recurrent training shall include annually touch-drills by each cabin crew member for simulating the operation of each type or variant of normal and emergency doors and exits for passenger evacuation.
Recurrent training shall also include at intervals not exceeding three years:
operation and actual opening by each cabin crew member, in a representative training device or in the actual aircraft, of each type or variant of normal and emergency exits in the normal and emergency modes;
actual operation by each cabin crew member, in a representative training device or in the actual aircraft, of the flight crew compartment security door, in both normal and emergency modes, and of the seat and restraint system, and a practical demonstration of the oxygen system equipment relevant to pilot incapacitation;
demonstration of the operation of all other exits including the flight crew compartment windows; and
demonstration of the use of the life-raft, or slide raft, where fitted.
Recurrent training shall include annually:
by each cabin crew member:
location and handling of all safety and emergency equipment installed or carried on board; and
the donning of life-jackets, portable oxygen and protective breathing equipment (PBE);
stowage of articles in the passenger compartment;
procedures related to aircraft surface contamination;
emergency procedures;
evacuation procedures;
incident and accident review;
crew resource management;
aero-medical aspects and first aid including related equipment;
security procedures.
Recurrent training shall also include at intervals not exceeding three years:
use of pyrotechnics (actual or representative devices);
practical demonstration of the use of flight crew checklists;
realistic and practical training in the use of all fire-fighting equipment, including protective clothing, representative of that carried in the aircraft;
by each cabin crew member:
extinguishing a fire characteristic of an aircraft interior fire;
donning and use of PBE in an enclosed simulated smoke-filled environment.
The annual recurrent training validity period shall be 12 calendar months counted from the end of the month when the check was taken.
If the recurrent training and checking required in (a) are undertaken within the last three calendar months of the validity period, the new validity period shall be counted from the original expiry date.
For the additional triennial training elements specified in (c)(2) and (d)(2), the validity period shall be 36 calendar months counted from the end of the month when the checks were taken.
has not performed any flying duties, he/she shall, before being reassigned to such duties, complete refresher training and checking for each aircraft type to be operated; or
has not performed flying duties on one particular aircraft type, he/she shall, before being reassigned to duties, complete on that aircraft type:
refresher training and checking; or
two familiarisation flights in accordance with ORO.CC.135.
emergency procedures;
evacuation procedures;
operation and actual opening, by each cabin crew member, of each type or variant of normal and emergency exits and of the flight crew compartment security door in the normal and emergency modes;
demonstration of the operation of all other exits including the flight crew compartment windows;
location and handling of all relevant safety and emergency equipment installed or carried on-board.
Textual Amendments
F1 Substituted by Commission Regulation (EU) No 800/2013 of 14 August 2013 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance).