- Latest available (Revised)
- Point in Time (01/07/2018)
- Original (As adopted by EU)
Commission Regulation (EU) No 965/2012 of 5 October 2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 01/07/2018.
There are currently no known outstanding effects for the Commission Regulation (EU) No 965/2012, Division SUBPART E.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
The operator shall only conduct the following low visibility operations (LVO) when approved by the competent authority:
low visibility take-off (LVTO) operation;
lower than standard category I (LTS CAT I) operation;
standard category II (CAT II) operation;
other than standard category II (OTS CAT II) operation;
standard category III (CAT III) operation;
approach operation utilising enhanced vision systems (EVS) for which an operational credit is applied to reduce the runway visual range (RVR) minima by no more than one third of the published RVR.
To obtain an LVO approval from the competent authority, the operator shall demonstrate compliance with the requirements of this Subpart.
each aircraft concerned is certified for operations to conduct CAT II operations; and
the approach is flown:
auto-coupled to an auto-land that needs to be approved for CAT IIIA operations; or
using an approved head-up display landing system (HUDLS) to at least 150 ft above the threshold.
each aircraft concerned is certified for operations with a decision height (DH) below 200 ft, or no DH, and equipped in accordance with the applicable airworthiness requirements;
a system for recording approach and/or automatic landing success and failure is established and maintained to monitor the overall safety of the operation;
the DH is determined by means of a radio altimeter;
the flight crew consists of at least two pilots;
all height call-outs below 200 ft above the aerodrome threshold elevation are determined by a radio altimeter.
the EVS is certified for the purpose of this Subpart and combines infra-red sensor image and flight information on the HUD;
for operations with an RVR below 550 m, the flight crew consists of at least two pilots;
for CAT I operations, natural visual reference to runway cues is attained at least at 100 ft above the aerodrome threshold elevation;
for approach procedure with vertical guidance (APV) and non-precision approach (NPA) operations flown with CDFA technique, natural visual reference to runway cues is attained at least at 200 ft above the aerodrome threshold elevation and the following requirements are complied with:
the approach is flown using an approved vertical flight path guidance mode;
the approach segment from final approach fix (FAF) to runway threshold is straight and the difference between the final approach course and the runway centreline is not greater than 2o;
the final approach path is published and not greater than 3,7o;
the maximum cross-wind components established during certification of the EVS are not exceeded.
the aerodrome has been approved for such operations by the State of the aerodrome; and
low visibility procedures (LVP) have been established.
The operator shall ensure that, prior to conducting an LVO:
each flight crew member:
complies with the training and checking requirements prescribed in the operations manual, including flight simulation training device (FSTD) training, in operating to the limiting values of RVR/VIS (visibility) and DH specific to the operation and the aircraft type;
is qualified in accordance with the standards prescribed in the operations manual;
the training and checking is conducted in accordance with a detailed syllabus.
the status of the visual and non-visual facilities is sufficient;
appropriate LVPs are in force according to information received from air traffic services (ATS);
flight crew members are properly qualified.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: