- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) No 195/2013Show full title
Commission Regulation (EU) No 195/2013 of 7 March 2013 amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as concerns innovative technologies for reducing CO2 emissions from light passenger and commercial vehicles (Text with EEA relevance)
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for:
Changes to legislation:
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
“‘ANNEX VIII TEST RESULTS
(To be completed by the type-approval authority and attached to the vehicle EC type-approval certificate)
In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one result. However, a combination of several results per version indicating the worst case is permissible. In the latter case, a note shall state that for items marked (*) only worst case results are given.
1.Results of the sound level testsU.K.
Number of the base regulatory act and latest amending regulatory act applicable to the approval. In case of a regulatory act with two or more implementation stages, indicate also the implementation stage:
| Variant/Version: | … | … | … |
| Moving (dB(A)/E): | … | … | … |
| Stationary (dB(A)/E): | … | … | … |
| at (min– 1): | … | … | … |
2.Results of the exhaust emission testsU.K.
2.1.Emissions from motor vehicles tested under the test procedure for light-duty vehiclesU.K.
Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:
Fuel(s)(1) … (diesel, petrol, LPG, NG, Bi-fuel: petrol/NG, LPG, Flex-fuel: petrol/ethanol, NG/H2NG…)
2.1.1.Type 1 test(2) (3) (vehicle emissions in the test cycle after a cold start)U.K.
| Variant/Version: | … | … | … |
| CO (mg/km) | … | … | … |
| THC (mg/km) | … | … | … |
| NMHC (mg/km) | … | … | … |
| NOx (mg/km) | … | … | … |
| THC + NOx (mg/km) | … | … | … |
| Mass of particulate matter (PM) (mg/km) | … | … | … |
| Number of particles (P) (#/km) (1) | … | … | … |
2.1.2.Type 2 test(2) (3) (emissions data required at type-approval for roadworthiness purposes)U.K.
Type 2, low idle test:
| Variant/Version: | … | … | … |
| CO (% vol.) | … | … | … |
| Engine speed (min– 1) | … | … | … |
| Engine oil temperature (°C) | … | … | … |
Type 2, high idle test:
| Variant/Version: | … | … | … |
| CO (% vol.) | … | … | … |
| Lambda Value | … | … | … |
| Engine speed (min– 1) | … | … | … |
| Engine oil temperature (°C) | … | … | … |
2.1.3.Type 3 test (emissions of crankcase gases): …U.K.
2.1.4.Type 4 test (evaporative emissions): …g/testU.K.
2.1.5.Type 5 test (durability of anti-pollution control devices):U.K.
Ageing distance covered (km)(e.g. 160 000 km): …
Deterioration factor DF: calculated/fixed(4)
Values:
Variant/Version: … … … CO … … … THC … … … NMHC … … … NOx … … … THC + NOx … … … Mass of particulate matter (PM) … … … Number of particles (P) (1) … … …
2.1.6.Type 6 test (average emissions at low ambient temperatures):U.K.
| Variant/Version: | … | … | … |
| CO (g/km) | … | … | … |
| THC (g/km) | … | … | … |
2.1.7.OBD: yes/no(4) U.K.
2.2.Emissions from engines tested under the test procedure for heavy-duty vehicles.U.K.
Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:…
Fuel(s)(1) … (diesel, petrol, LPG, NG, ethanol …)
2.2.1.Results of the ESC test(5) (6) (7) U.K.
| Variant/Version: | … | … | … |
| CO (mg/kWh) | … | … | … |
| THC (mg/kWh) | … | … | … |
| NOx (mg/kWh) | … | … | … |
| NH3 (ppm) (1) | … | … | … |
| PM mass (mg/kWh) | … | … | … |
| PM number (#/kWh) (1) | … | … | … |
2.2.2.Result of the ELR test(5) U.K.
| Variant/Version: | … | … | … |
| Smoke value:…m– 1 | … | … | … |
2.2.3.Result of the ETC test(6) (7) U.K.
| Variant/Version: | … | … | … |
| CO (mg/kWh) | … | … | … |
| THC (mg/kWh) | … | … | … |
| NMHC (mg/kWh) (1) | … | … | … |
| CH4 (mg/kWh) (1) | … | … | … |
| NOx (mg/kWh) | … | … | … |
| NH3 (ppm) (1) | … | … | … |
| PM mass (mg/kWh) | … | … | … |
| PM number (#/kWh) (1) | … | … | … |
2.2.4.Idle test(5) U.K.
| Variant/Version: | … | … | … |
| CO (% vol.) | … | … | … |
| Lambda Value (1) | … | … | … |
| Engine speed (min– 1) | … | … | … |
| Engine oil temperature (°C) | … | … | … |
2.3.Diesel smokeU.K.
Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:
2.3.1.Results of the test under free accelerationU.K.
| Variant/Version: | … | … | … |
| Corrected value of the absorption coefficient (m– 1) | … | … | … |
| Normal engine idling speed | … | … | … |
| Maximum engine speed | … | … | … |
| Oil temperature (min./max.) | … | … | … |
3.Results of the CO2 emission, fuel/electric energy consumption, and electric range testsU.K.
Number of the base regulatory act and the latest amending regulatory act applicable to the approval:
3.1.Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC)(5) (8) U.K.
| a The unit “l/100 km” is replaced by “m3/100 km” for vehicles fuelled with NG and H2NG, and by “kg/100 km” for vehicles fuelled with hydrogen. | |||
| Variant/Version: | … | … | … |
| CO2 mass emission (urban conditions) (g/km) | … | … | … |
| CO2 mass emission (extra-urban conditions) (g/km) | … | … | … |
| CO2 mass emission (combined) (g/km) | … | … | … |
| Fuel consumption (urban conditions) (l/100 km)a | … | … | … |
| Fuel consumption (extra-urban conditions) (l/100 km)a | … | … | … |
| Fuel consumption (combined) (l/100 km)a | … | … | … |
3.2.Externally chargeable hybrid electric vehicles (OVC)(5) U.K.
| Variant/Version: | … | … | … |
| CO2 mass emission (Condition A, combined) (g/km) | … | … | … |
| CO2 mass emission (Condition B, combined) (g/km) | … | … | … |
| CO2 mass emission (weighted, combined) (g/km) | … | … | … |
| Fuel consumption (Condition A, combined) (l/100 km) (g) | … | … | … |
| Fuel consumption (Condition B, combined) (l/100 km) (g) | … | … | … |
| Fuel consumption (weighted, combined) (l/100 km) (g) | … | … | … |
| Electric energy consumption (Condition A, combined) (Wh/km) | … | … | … |
| Electric energy consumption (Condition B, combined) (Wh/km) | … | … | … |
| Electric energy consumption (weighted and combined) (Wh/km) | … | … | … |
| Pure electric range (km) | … | … | … |
3.3.Pure electric vehicles(5) U.K.
| Variant/Version: | … | … | … |
| Electric energy consumption (Wh/km) | … | … | … |
| Range (km) | … | … | … |
3.4.Hydrogen fuel cell vehicles(5) U.K.
| Variant/Version: | … | … | … |
| Fuel consumption (kg/100 km) | … | … | … |
4.Results of the tests for vehicles fitted with eco-innovation(s)(9) (10) (11) U.K.
| a (h4) Number of the Commission Decision approving the eco-innovation. | |||||||
| b (h5) Assigned in the Commission Decision approving the eco-innovation. | |||||||
| c (h6) If a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology. | |||||||
| d (h7) Sum of the CO2 emissions savings of each individual eco-innovation. | |||||||
| Variant/Version … | |||||||
| Decision approving the eco-innovationa | Code of the eco-innovationb | 1. CO2 emissions of the baseline vehicle (g/km) | 2. CO2 emissions of the eco-innovation vehicle (g/km) | 3. CO2 emissions of the baseline vehicle under Type 1 test-cyclec | 4. CO2 emissions of the eco-innovation vehicle under Type 1 test-cycle (= 3.5.1.3) | 5. Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions | CO2 emissions savings |
| xxxx/201x | … | … | … | … | … | … | … |
| … | … | … | … | … | … | … | … |
| … | … | … | … | … | … | … | … |
| Total CO2 emissions savings (g/km)d | … | ||||||
4.1.General code of the eco-innovation(s)(12) U.K.
Explanatory notes U.K.
(h)Eco-innovations.”U.K.
(1)
When restrictions for the fuel are applicable, indicate these restrictions (e.g. for natural gas the L range or the H range).
(2)
For bi fuel vehicles, the table shall be repeated for both fuels.
(3)
For flex fuel vehicles, when the test is to be performed on both fuels, according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either bi-fuel or mono-fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.
(4)
Delete where not applicable.
(5)
If applicable.
(6)
For Euro VI, ESC shall be understood as WHSC and ETC as WHTC.
(7)
For Euro VI, if CNG and LPG fuelled engines are tested on different reference fuels, the table shall be reproduced for each reference fuel tested.
(8)
Repeat the table for each reference fuel tested.
(12)
(h8)The general code of the eco-innovation(s) shall consist of the following elements each separated by a blank space:U.K.
Code of the approval authority as set out in Annex VII;
Individual code of each eco-innovation fitted in the vehicle, indicated in chronological order of the Commission approval decisions.
(E.g. the general code of three eco-innovations approved chronologically as 10, 15 and 16 and fitted to a vehicle certified by the German type-approval authority should be: “e1 10 15 16”.)’.
Options/Help
Print Options
PrintThe Whole Regulation
PrintThe Whole Annex
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.