Commission Implementing Regulation (EU) No 396/2013Show full title

Commission Implementing Regulation (EU) No 396/2013 of 30 April 2013 amending Regulation (EU) No 1014/2010 as regards certain requirements for the monitoring of CO2 emissions from new passenger cars (Text with EEA relevance)

ANNEXU.K.

ANNEX I

Data sources

a

In accordance with Article 3(8) of this Regulation.

b

In accordance with Article 3(4) of this Regulation.

c

In accordance with Article 3(7) and (8) of this Regulation.

ParameterCertificate of conformity (Part I, Model A1, A2 or B, as appropriate, set out in Annex IX to Directive 2007/46/EC)Type-approval documentation (Directive 2007/46/EC)
ManufacturerSection 0.5Section 0.5 of Part I of Annex III
Type-approval number and its extensionSection 0.10Type-approval certificate as specified in Annex VI
TypeSection 0.2Section 0.2 of Part I of Annex III
VariantSection 0.2Part II of Annex III
VersionSection 0.2Part II of Annex III
MakeSection 0.1Section 0.1 of Part I of Annex III
Commercial nameSection 0.2.1Section 0.2.1 of Part I of Annex III
Category of the vehicle type-approvedSection 0.4Section 0.4 of Part I of Annex III
Mass (kg)Section 13Section 2.6 of Part I of Annex IIIa
Specific CO2 emissions (g/km)bSection 49.1Section 3 of Annex VIII
Wheel base (mm)Section 4Section 2.1 of Part I of Annex IIIa
Track width steering axle – other axle (mm)Section 30Section 2.3.1 and 2.3.2 of Part I of Annex IIIc
Fuel typeSection 26 (or 23)Section 3.2.2.1 of Part I of Annex III
Fuel modeSection 26.1 (or 23.1)Section 3.2.2.4 of Part I of Annex III
Engine capacity (cm3)Section 25Section 3.2.1.3. of Part I of Annex III
Electric energy consumption (Wh/km)Section 49.2

ANNEX II Table of data precision

The required precision of the detailed monitoring data to be reported in accordance with Article 2:

CO2 (g/km)Integer
Mass (kg)Integer
Wheel base (mm)Integer
Track width steering axel — other axle (mm)Integer
Emission reduction through innovative technologies (g/km)Rounded to the nearest one decimal place