Regulation (EU) No 575/2013 of the European Parliament and of the CouncilShow full title

[X1 [F1 Subsection 4 U.K. Caps for securitisation positions

Article 267 U.K. Maximum risk weight for senior securitisation positions: look-through approach

1. An institution which has knowledge at all times of the composition of the underlying exposures may assign the senior securitisation position a maximum risk weight equal to the exposure-weighted-average risk weight that would be applicable to the underlying exposures as if the underlying exposures had not been securitised.

2. In the case of pools of underlying exposures where the institution uses exclusively the Standardised Approach or the IRB Approach, the maximum risk weight of the senior securitisation position shall be equal to the exposure-weighted-average risk weight that would apply to the underlying exposures under Chapter 2 or 3, respectively, as if they had not been securitised.

In the case of mixed pools the maximum risk weight shall be calculated as follows:

(a) where the institution applies the SEC-IRBA, the Standardised Approach portion and the IRB Approach portion of the underlying pool shall each be assigned the corresponding Standardised Approach risk weight and IRB Approach risk weight respectively;

(b) where the institution applies the SEC-SA or the SEC-ERBA, the maximum risk weight for senior securitisation positions shall be equal to the Standardised Approach weighted-average risk weight of the underlying exposures.

3. For the purposes of this Article, the risk weight that would be applicable under the IRB Approach in accordance with Chapter 3 shall include the ratio of:

(a) expected losses multiplied by 12,5 to

(b) the exposure value of the underlying exposures.

4. Where the maximum risk weight calculated in accordance with paragraph 1 results in a lower risk weight than the risk-weight floors set out in Articles 259 to 264, as applicable, the former shall be used instead.

Article 268 U.K. Maximum capital requirements

1. An originator institution, a sponsor institution or other institution using the SEC-IRBA or an originator institution or sponsor institution using the SEC-SA or the SEC-ERBA may apply a maximum capital requirement for the securitisation position it holds equal to the capital requirements that would be calculated under Chapter 2 or 3 in respect of the underlying exposures had they not been securitised. For the purposes of this Article, the IRB Approach capital requirement shall include the amount of the expected losses associated with those exposures calculated under Chapter 3 and that of unexpected losses.

2. In the case of mixed pools, the maximum capital requirement shall be determined by calculating the exposure-weighted average of the capital requirements of the IRB Approach and Standardised Approach portions of the underlying exposures in accordance with paragraph 1.

3. The maximum capital requirement shall be the result of multiplying the amount calculated in accordance with paragraphs 1 or 2 by the largest proportion of interest that the institution holds in the relevant tranches (V), expressed as a percentage and calculated as follows:

(a) for an institution that has one or more securitisation positions in a single tranche, V shall be equal to the ratio of the nominal amount of the securitisation positions that the institution holds in that given tranche to the nominal amount of the tranche;

(b) for an institution that has securitisation positions in different tranches, V shall be equal to the maximum proportion of interest across tranches. For these purposes, the proportion of interest for each of the different tranches shall be calculated as set out in point (a).

4. When calculating the maximum capital requirement for a securitisation position in accordance with this Article, the entire amount of any gain on sale and credit-enhancing interest-only strips arising from the securitisation transaction shall be deducted from Common Equity Tier 1 items in accordance with point (k) of Article 36(1).] ]