- Latest available (Revised)
- Point in Time (27/06/2019)
- Original (As adopted by EU)
Regulation (EU) No 575/2013 of the European Parliament and of the Council of 26 June 2013 on prudential requirements for credit institutions and investment firms and amending Regulation (EU) No 648/2012 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 27/06/2019.
There are currently no known outstanding effects by UK legislation for Regulation (EU) No 575/2013 of the European Parliament and of the Council, Section 5 .
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. Institutions may use the Standardised Method (hereinafter referred to as ‘ SM ’ ) only for calculating the exposure value for OTC derivatives and long settlement transactions.
2. When applying the SM, institutions shall calculate the exposure value separately for each netting set, net of collateral, as follows:
where:
=
current market value of the portfolio of transactions within the netting set with a counterparty gross of collateral, where:
where:
=
the current market value of transaction i ;
=
the current market value of the collateral assigned to the netting set, where:
where:
=
the current market value of collateral l;
=
index designating transaction;
=
index designating collateral;
=
index designating hedging set category;
The hedging sets for this purpose correspond to risk factors for which risk positions of opposite sign can be offset to yield a net risk position on which the exposure measure is then based.
=
risk position from transaction i with respect to hedging set j;
=
risk position from collateral l with respect to hedging set j;
=
CCR Multiplier set out in Table 5 with respect to hedging set j;
=
1,4.
3. For the purposes of the calculation under paragraph 2:
(a) eligible collateral received from a counterparty shall have a positive sign and collateral posted to a counterparty shall have a negative sign;
(b) only collateral that is eligible under Article 197, Article 198 and Article 299(2)(d) shall be used for the SM;
(c) an institution may disregard the interest rate risk from payment legs with a remaining maturity of less than one year;
(d) an institution may treat transactions that consist of two payment legs that are denominated in the same currency as a single aggregate transaction. The treatment for payment legs applies to the aggregate transaction.
1. Institutions shall map transactions with a linear risk profile to risk positions in accordance with the following provisions:
(a) transactions with a linear risk profile with equities (including equity indices), gold, other precious metals or other commodities as the underlying shall be mapped to a risk position in the respective equity (or equity index) or commodity and an interest rate risk position for the payment leg;
(b) transactions with a linear risk profile with a debt instrument as the underlying instrument shall be mapped to an interest rate risk position for the debt instrument and another interest rate risk position for the payment leg;
(c) transactions with a linear risk profile that stipulate the exchange of payment against payment, including foreign exchange forwards, shall be mapped to an interest rate risk position for each of the payment legs.
Where, under a transaction mentioned in point (a), (b) or (c), a payment leg or the underlying debt instrument is denominated in foreign currency, that payment leg or underlying instrument shall also be mapped to a risk position in that currency.
2. For the purposes of paragraph 1, the size of a risk position from a transaction with linear risk profile shall be the effective notional value (market price multiplied by quantity) of the underlying financial instruments or commodities converted to the institution's domestic currency by multiplication with the relevant exchange rate, except for debt instruments.
3. For debt instruments and for payment legs, the size of the risk position shall be the effective notional value of the outstanding gross payments (including the notional amount) converted to the currency of the home Member State, multiplied by the modified duration of the debt instrument or payment leg, as the case may be.
4. The size of a risk position from a credit default swap shall be the notional value of the reference debt instrument multiplied by the remaining maturity of the credit default swap.
[F15. EBA shall develop draft regulatory technical standards to specify:
(a) the method for identifying transactions with only one material risk driver;
(b) the method for identifying transactions with more than one material risk driver and for identifying the most material of those risk drivers for the purposes of paragraph 3.
EBA shall submit those draft regulatory technical standards to the Commission by 28 December 2019 .
Power is delegated to the Commission to supplement this Regulation by adopting the regulatory technical standards referred to in the first subparagraph in accordance with Articles 10 to 14 of Regulation (EU) No 1093/2010.]
Textual Amendments
F1 Inserted by Regulation (EU) 2019/876 of the European Parliament and of the Council of 20 May 2019 amending Regulation (EU) No 575/2013 as regards the leverage ratio, the net stable funding ratio, requirements for own funds and eligible liabilities, counterparty credit risk, market risk, exposures to central counterparties, exposures to collective investment undertakings, large exposures, reporting and disclosure requirements, and Regulation (EU) No 648/2012 (Text with EEA relevance).
1. Institutions shall determine the size of the risk positions for transactions with a non-linear risk profile in accordance with the following paragraphs.
2. The size of a risk position from an OTC derivative with a non-linear risk profile, including options and swaptions, of which the underlying is not a debt instrument or a payment leg shall be equal to the delta equivalent effective notional value of the financial instrument that underlies the transaction in accordance with Article 280(1).
3. The size of a risk position from an OTC derivative with a non-linear risk profile, including options and swaptions, of which the underlying is a debt instrument or a payment leg, shall be equal to the delta equivalent effective notional value of the financial instrument or payment leg multiplied by the modified duration of the debt instrument or payment leg, as the case may be.
For the determination of risk positions, institutions shall treat collateral as follows:
collateral received from a counterparty shall be treated as an obligation to the counterparty under a derivative contract (short position) that is due on the day the determination is made;
collateral posted with the counterparty shall be treated as a claim on the counterparty (long position) that is due on the day the determination is made.
3. EBA shall develop draft regulatory technical standards to specify:
(a) in accordance with international regulatory developments, the formula that institutions shall use to calculate the supervisory delta of call and put options mapped to the interest rate risk category compatible with market conditions in which interest rates may be negative as well as the supervisory volatility that is suitable for that formula;
(b) the method for determining whether a transaction is a long or short position in the primary risk driver or in the most material risk driver in the given risk category for transactions referred to in Article 277(3).
EBA shall submit those draft regulatory technical standards to the Commission by 28 December 2019 .
Power is delegated to the Commission to supplement this Regulation by adopting the regulatory technical standards referred to in the first subparagraph in accordance with Articles 10 to 14 of Regulation (EU) No 1093/2010.]
Textual Amendments
F1 Inserted by Regulation (EU) 2019/876 of the European Parliament and of the Council of 20 May 2019 amending Regulation (EU) No 575/2013 as regards the leverage ratio, the net stable funding ratio, requirements for own funds and eligible liabilities, counterparty credit risk, market risk, exposures to central counterparties, exposures to collective investment undertakings, large exposures, reporting and disclosure requirements, and Regulation (EU) No 648/2012 (Text with EEA relevance).
1. An institution shall determine the size and sign of a risk position as follows:
(a) for all instruments other than debt instruments:
as the effective notional value in the case of a transaction with a linear risk profile;
as the delta equivalent notional value, , in the case of a transaction with a non-linear risk profile,
where:
=
price of the underlying instrument, expressed in the reference currency;
=
value of the financial instrument (in the case of an option, the value is the option price);
=
price of the underlying instrument, expressed in the same currency as V;
(b) for debt instruments and the payment legs of all transactions:
as the effective notional value multiplied by the modified duration in the case of a transaction with a linear risk profile;
If V is denominated in a currency other than the reference currency, the derivative shall be converted into the reference currency by multiplication with the relevant exchange rate.
2. Institutions shall group the risk positions into hedging sets. The absolute value amount of the sum of the resulting risk positions shall be calculated for each hedging set. The net risk position shall be the result of that calculation and shall be calculated for the purposes of Article 276(2) as follows:
1. In order to calculate interest rate risk position, institutions shall apply the following provisions.
2. For interest rate risk positions from the following:
money deposits received from the counterparty as collateral;
a payment legs;
underlying debt instruments,
to which in each case a capital charge of 1,60 % or less applies in accordance with Table 1 of Article 336, institutions shall assign those positions to one of the six hedging sets for each currency set out in Table 4.
Government referenced interest rates | Non-government referenced interest rates | |
---|---|---|
Maturity | < 1 year | < 1 year |
>1 ≤ 5 years | > 5 years | |
>1 ≤ 5 years | > 5 years |
3. For interest rate risk positions from underlying debt instruments or payment legs for which the interest rate is linked to a reference interest rate that represents a general market interest level, the remaining maturity shall be the length of the time interval up to the next re-adjustment of the interest rate. In all other cases, it shall be the remaining life of the underlying debt instrument or, in the case of a payment leg, the remaining life of the transaction.
1. Institutions shall establish hedging sets in accordance with paragraphs 2 to 5.
2. There shall be one hedging set for each issuer of a reference debt instrument that underlies a credit default swap.
N-th to default basket credit default swaps shall be treated as follows:
(a) the size of a risk position in a reference debt instrument in a basket underlying an n-th to default credit default swap shall be the effective notional value of the reference debt instrument, multiplied by the modified duration of the n-th to default derivative with respect to a change in the credit spread of the reference debt instrument;
(b) there shall be one hedging set for each reference debt instrument in a basket underlying a given ‘ nth to default ’ credit default swap. Risk positions from different n-th to default credit default swaps shall not be included in the same hedging set;
(c) the CCR multiplier applicable to each hedging set created for one of the reference debt instruments of an n-th to default derivative shall be as follows:
0,3 % for reference debt instruments that have a credit assessment from a recognised ECAI equivalent to credit quality step 1 to 3;
0,6 % for other debt instruments.
3. For interest rate risk positions from:
(a) money deposits that are posted with a counterparty as collateral when that counterparty does not have debt obligations of low specific risk outstanding;
(b) underlying debt instruments, to which according to Table 1 of Article 336 a capital charge of more than 1,60 % applies.
There shall be one hedging set for each issuer.
When a payment leg emulates such a debt instrument, there shall also be one hedging set for each issuer of the reference debt instrument.
An institution may assign risk positions that arise from debt instruments of a particular issuer, or from reference debt instruments of the same issuer that are emulated by payment legs, or that underlie a credit default swap, to the same hedging set.
4. Underlying financial instruments other than debt instruments shall be assigned to the same hedging sets only if they are identical or similar instruments. In all other cases they shall be assigned to separate hedging sets.
For the purposes of this paragraph institutions shall determine whether underlying instruments are similar in accordance with the following principles:
(a) for equities, the underlying is similar if it is issued by the same issuer. An equity index shall be treated as a separate issuer;
(b) for precious metals, the underlying is similar if it is the same metal. A precious metal index shall be treated as a separate precious metal;
(c) for electric power, the underlying is similar if the delivery rights and obligations refer to the same peak or off-peak load time interval within any 24-hour interval;
(d) for commodities, the underlying is similar if it is the same commodity. A commodity index shall be treated as a separate commodity.
5. The CCR multipliers (hereinafter referred to as ‘ CCRM ’ ) for the different hedging set categories are set out in the following table:
Hedging set categories | CCRM | |
---|---|---|
1. | Interest Rates | 0,2 % |
2. | Interest Rates for risk positions from a reference debt instrument that underlies a credit default swap and to which a capital charge of 1,60 %, or less, applies under Table 1 of Chapter 2 of Title IV. | 0,3 % |
3. | Interest Rates for risk positions from a debt instrument or reference debt instrument to which a capital charge of more than 1,60 % applies under Table 1 of Chapter 2 of Title IV. | 0,6 % |
4. | Exchange Rates | 2,5 % |
5. | Electric Power | 4 % |
6. | Gold | 5 % |
7. | Equity | 7 % |
8. | Precious Metals (other than gold) | 8,5 % |
9. | Other Commodities (excluding precious metals and electricity power) | 10 % |
10. | Underlying instruments of OTC derivatives that are not in any of the above categories | 10 % |
Underlying instruments of OTC derivatives, as referred to in point 10 of Table 5, shall be assigned to separate individual hedging sets for each category of underlying instrument.
6. For transactions with a non-linear risk profile or for payment legs and transactions with debt instruments as underlying for which the institution cannot determine the delta or the modified duration, as the case may be, with an instrument model that the competent authority has approved for the purposes of determining the own funds requirements for market risk, the competent authority shall either determine the size of the risk positions and the applicable CCRMjs conservatively, or require the institution to use the method set out in Section 3. Netting shall not be recognised (that is, the exposure value shall be determined as if there were a netting set that comprises just an individual transaction).
7. An institution shall have internal procedures to verify that, prior to including a transaction in a hedging set, the transaction is covered by a legally enforceable netting contract that meets the requirements set out in Section 7.
8. An institution that makes use of collateral to mitigate its CCR shall have internal procedures to verify that, prior to recognising the effect of collateral in its calculations, the collateral meets the legal certainty standards set out in Chapter 4.]
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Regulation you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Regulation without Annexes you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Regulation without Annexes you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Regulation without Annexes you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: