- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) No 65/2014Show full title
Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods (Text with EEA relevance)
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 07/03/20174.66 MB
- Revised 20/02/20141.03 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: ANNEX VIII
Changes to legislation:
There are currently no known outstanding effects by UK legislation for Commission Delegated Regulation (EU) No 65/2014, ANNEX VIII.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[F1ANNEX VIIIU.K. Product compliance verification by market surveillance authorities
Textual Amendments
F1Substituted by Commission Delegated Regulation (EU) 2017/254 of 30 November 2016 amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013, (EU) No 812/2013, (EU) No 65/2014, (EU) No 1254/2014, (EU) 2015/1094, (EU) 2015/1186 and (EU) 2015/1187 with regard to the use of tolerances in verification procedures (Text with EEA relevance).
The verification tolerances set out in this Annex relate only to the verification of the measured parameters by [F2Great Britain] authorities and shall not be used by the supplier as an allowed tolerance to establish the values in the technical documentation. The values and classes on the label or in the product fiche shall not be more favourable for the supplier than the values reported in the technical documentation.
Textual Amendments
F2Words in Annex 8 substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/539), reg. 1(3), Sch. 5 para. 11(10)(a) (as amended by S.I. 2020/1528, regs. 1(2), 6(1)(2)(c)(x)); 2020 c. 1, Sch. 5 para. 1(1)
When verifying the compliance of a product model with the requirements laid down in this Delegated Regulation, for the requirements referred to in this Annex, the authorities of the [F2Great Britain] shall apply the following procedure:
(1)
The [F2Great Britain] authorities shall verify one single unit of the model.
(2)
The model shall be considered to comply with the applicable requirements if:
(a)
the values given in the technical documentation pursuant to Article 5(b) of Directive 2010/30/EU (declared values), and, where applicable, the values used to calculate these values, are not more favourable for the supplier than the corresponding values given in the test reports pursuant to point (iii) of the abovementioned Article; and
(b)
the values published on the label and in the product fiche are not more favourable for the supplier than the declared values, and the indicated energy efficiency class is not more favourable for the supplier than the class determined by the declared values; and
(c)
when the [F2Great Britain] authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from these measurements) comply with the respective verification tolerances as given in Table 6.
(3)
If the results referred to in points 2(a) or (b) are not achieved, the model and all models that have been listed as equivalent models in the supplier's technical documentation shall be considered not to comply with this Delegated Regulation.
(4)
If the result referred to in point 2(c) is not achieved, the [F2Great Britain] authorities shall select three additional units of the same model for testing. As an alternative, the three additional units selected may be of one or more different models that have been listed as equivalent models in the supplier's technical documentation.
(5)
The model shall be considered to comply with the applicable requirements if for these three units, the arithmetical mean of the determined values complies with the respective tolerances given in Table 6.
(6)
If the result referred to in point 5 is not achieved, the model and all models that have been listed as equivalent models in the supplier's technical documentation shall be considered not to comply with this Delegated Regulation.
(7)
F3...
Textual Amendments
The [F2Great Britain] authorities shall use the measurement and calculation methods set out in Annex II.
The [F2Great Britain] authorities shall only apply the verification tolerances that are set out in Table 6 and shall only use the procedure described in points 1 to [F46] for the requirements referred to in this Annex. No other tolerances, such as those set out in [F5designated] standards or in any other measurement method, shall be applied.
Textual Amendments
Table 6
Verification tolerances
| Parameters | Verification tolerances |
|---|---|
| Mass of the oven, M | The determined value shall not exceed the declared value of M by more than 5 %. |
| Volume of the cavity of the oven, V | The determined value shall not be lower than the declared value of V by more than 5 %. |
| EC electric cavity , EC gas cavity | The determined values shall not exceed the declared values of EC electric cavity and EC gas cavity by more than 5 %. |
| W BEP , W L | The determined values shall not exceed the declared values of W BEP and W L by more than 5 %. |
| Q BEP , P BEP | The determined values shall not be lower than the declared values of Q BEP and P BEP by more than 5 %. |
| Q max | The determined value shall not exceed the declared value of Q max by more than 8 %. |
| E middle | The determined value shall not be lower than the declared value of E middle by more than 5 %. |
| GFE hood | The determined value shall not be lower than the declared value of GFE hood by more than 5 %. |
| P o , P s | The determined values of power consumption P o and P s shall not exceed the declared values of P o and P s by more than 10 %. The determined values of power consumption P o and P s of less than or equal to 1,00 W shall not exceed the declared values of P o and P s by more than 0,10 W. |
| Sound power level, L WA | The determined value shall not exceed the declared value of L WA .] |
Options/Help
Print Options
PrintThe Whole Regulation
PrintThis Annex only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.