1. Introductory Text

2. Article 1. Subject matter and scope

3. Article 2. Definitions

4. Article 3. Ecodesign requirements and timetable

5. Article 4. Conformity assessment

6. Article 5. Verification procedure for market surveillance purposes

7. Article 6. Indicative benchmarks

8. Article 7. Review

9. Article 8. Transitional provisions

10. Article 9. Entry into force

11. Signature

12. 1. ANNEX I

       Definitions applicable for Annexes II to V

       1. For the purpose of Annexes II to V the following...

       2. ‘seasonal space heating energy efficiency’ (ηs) means the ratio between...

    2. ANNEX II

       Ecodesign requirements

       1. 1. Specific ecodesign requirements for seasonal space heating energy efficiency

       2. 2. Specific ecodesign requirements for emissions.

       3. 3. Requirements for product information

    3. ANNEX III

       Measurements and calculations

       1. 1. For the purposes of compliance and verification of compliance with...

       2. 2. General conditions for measurements and calculations

       3. 3. General conditions for seasonal space heating energy efficiency

       4. 4. General conditions for emissions

       5. 5. Specific conditions for seasonal space heating energy efficiency

    4. ANNEX IV

       Product compliance verification by market surveillance authorities

       1. The verification tolerances defined in this Annex relate only to...

       2. When verifying the compliance of a product model with the...

       3. The Great Britain authorities shall verify one single unit of...

       4. The Great Britain authorities shall use the measurement and calculation...

       5. The Great Britain authorities shall only apply the verification tolerances...

       6. Table 4 Verification tolerances Parameters Verification tolerances Seasonal space-heating energy...

    5. ANNEX V

       Indicative benchmarks referred to in Article 6

       1. At the time of entry into force of this Regulation,...

       2. Specific benchmarks for seasonal space heating energy efficiency of solid...

       3. The benchmarks specified in points 1 to 5 do not...

       4. For closed fronted solid fuel local space heaters using solid...

       5. For closed fronted solid fuel local space heaters using compressed...

       6. For cookers an example of a good combination is an...