http://www.legislation.gov.uk/id/eur/2015/1428/adopted

http://www.legislation.gov.uk/eur/2015/1428/annex/I/adopted

Commission Regulation (EU) 2015/1428 of 25 August 2015 amending Commission Regulation (EC) No 244/2009 with regard to ecodesign requirements for non-directional household lamps and Commission Regulation (EC) No 245/2009 with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps and repealing Directive 2000/55/EC of the European Parliament and of the Council and Commission Regulation (EU) No 1194/2012 with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment (Text with EEA relevance)

Commission Regulation (EU) 2015/1428

2020-12-12

King's Printer of Acts of Parliament

https://webarchive.nationalarchives.gov.uk/eu-exit/https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32015R1428

text

text/xml

Regulation

Commission Regulation (EU) 2019/2020 of 1 October 2019 laying down ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012 (Text with EEA relevance.)

Regulation

ANNEX IAmendment to Annex III of Regulation (EC) No 245/2009

1.In Annex III, point 1.2 (B) the last paragraph is replaced by the following:

High pressure sodium lamps with lamp efficacy requirements shall have at least the lamp lumen maintenance factors and lamp survival factors in Table 13:
Table 13Lamp lumen maintenance factors & lamp survival factors for high pressure sodium lamps — Stage 2
High pressure sodium lamp category and burning hours for measurement
Lamp lumen maintenance factor
Lamp survival factor
P ≤ 75 W
LLMF and LSF measured at 12 000 burning hours
Ra ≤ 60
> 0,80
> 0,90
Ra > 60
> 0,75
> 0,75
all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast
> 0,75
> 0,80
P > 75 W ≤ 605 W
LLMF and LSF measured at 16 000 burning hours
Ra ≤ 60
> 0,85
> 0,90
Ra > 60
> 0,70
> 0,65
all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast
> 0,75
> 0,55
The requirements in Table 13 for retrofit lamps designed to operate on high pressure mercury vapour lamp ballast shall be applicable until 6 years after the entry into force of this Regulation.

High pressure sodium lamp category and burning hours for measurement	Lamp lumen maintenance factor	Lamp survival factor
P ≤ 75 W LLMF and LSF measured at 12 000 burning hours	Ra ≤ 60	> 0,80	> 0,90
Ra > 60	> 0,75	> 0,75
all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast	> 0,75	> 0,80
P > 75 W ≤ 605 W LLMF and LSF measured at 16 000 burning hours	Ra ≤ 60	> 0,85	> 0,90
Ra > 60	> 0,70	> 0,65
all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast	> 0,75	> 0,55

2.In Annex III, point 1.2 (C) is replaced by the following:

C.Third stage requirements
Eight years after the entry into force of this Regulation:
Metal halide lamps with lamp efficacy requirements shall have at least the lamp lumen maintenance factors and lamp survival factors in Table 14:
Table 14Lamp lumen maintenance factors and lamp survival factors for metal halide lamps — Stage 3
Burning Hours
Lamp lumen maintenance factor
Lamp survival factor
12 000
> 0,80
> 0,80