Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance) (c. 166)

ANNEX I Administrative provisions for the type-approval of vehicles, components or separate technical units for measures implementing Regulation (EC) No 661/2009 setting out requirements in areas covered by UNECE regulations

PART 2 EC type-approval certificate

MODEL Format: A4 (210 × 297 mm)

EC TYPE-APPROVAL CERTIFICATE (IN ACCORDANCE WITH ARTICLE 20 OF THE FRAMEWORK DIRECTIVE)

Stamp of type-approval authority

Communication concerning:

a Delete where not applicable.
EC type-approvala extension of EC type-approvala refusal of EC type-approvala withdrawal of EC type-approvala	of a type of vehicle with regard to a system/component/separate technical unita incorporating new technologies or new concepts incompatible with UNECE Regulation No …

with regard to Regulation (EC) No 661/2009, as last amended by Regulation (EU) …/…

EC type-approval number:

Reason for extension:

SECTION I

0.1. Make (trade name of manufacturer):

0.2. Type:

0.2.1. Commercial name(s) (if available):

0.3. Means of identification of type, if marked on the vehicle/component/separate technical unit^a (1):

0.3.1. Location of that marking:

0.4. Category of vehicle(2):

0.5. Name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer's representative (if any):

SECTION II

1. Additional information: see Addendum.

2. Technical service responsible for carrying out the tests:

3. Date of test report:

4. Number of test report:

5. Remarks (if any): see Addendum.

6. Place:

7. Date:

8. Signature:

Attachments:

• Information package

• Test report

• Completed communication form conforming to the relevant model in the applicable UNECE Regulation, albeit without the mentioning of an UNECE approval being granted or extended as well as without the mentioning of an UNECE type-approval number.

NB: If this model is used for type-approval pursuant to Article 20 of Directive 2007/46/EC it shall not bear the heading ‘EC Vehicle Type-Approval Certificate’, except in the case mentioned in Article 20 where the Commission has decided to allow a Member State to grant a type-approval in accordance with the Framework Directive.

Addendum to EC type-approval certificate No …

1. Approval procedure according to Article 20 of Directive 2007/46/EC (exemptions for new technologies or new concepts), authorised by the Commission: yes/no(3)

2. Implementing measure of Regulation (EC) No 661/2009 forming the basis of this EC type-approval: UNECE Regulation No … concerning

3. In case of components and separate technical units, example of the type-approval marking on the component or separate technical unit:

4. EC type-approval valid until (DD/MM/YYYY):

5. Remarks:

(1)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(2)

As defined in Directive 2007/46/EC, Annex II, Section A.

(3)

Delete where not applicable.