- Latest available (Revised)
- Point in Time (01/05/2016)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 01/05/2016.
There are currently no known outstanding effects for the Commission Delegated Regulation (EU) 2015/2446.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
through working or processing a maximum content of non-originating materials is not exceeded;
through working or processing the 4-digit Harmonized System heading or 6-digit Harmonized System sub-heading of the manufactured products becomes different from the 4-digit Harmonized System heading or 6-digit sub-heading respectively of the materials used;
a specific working and processing operation is carried out;
working or processing is carried out on certain wholly obtained materials.
Subject to the provision referred to in the first subparagraph, the rules in the list represent the minimum amount of working or processing required, and the carrying-out of more working or processing also confers originating status; conversely, the carrying-out of less working or processing cannot confer originating status. Thus, if a rule provides that non-originating material, at a certain level of manufacture, may be used, the use of such material at an earlier stage of manufacture is allowed, and the use of such material at a later stage is not.
However, the expression ‘Manufacture from materials of any heading, including other materials of heading …’ or ‘Manufacture from materials of any heading, including other materials of the same heading as the product’ means that materials of any heading(s) may be used, except those of the same description as the product as given in column 2 of the list.
The following are the basic textile materials:
silk;
wool;
coarse animal hair;
fine animal hair;
horsehair;
cotton;
paper-making materials and paper;
flax;
true hemp;
jute and other textile bast fibres;
sisal and other textile fibres of the genus Agave;
coconut, abaca, ramie and other vegetable textile fibres;
synthetic man-made filaments;
artificial man-made filaments;
current-conducting filaments;
synthetic man-made staple fibres of polypropylene;
synthetic man-made staple fibres of polyester;
synthetic man-made staple fibres of polyamide;
synthetic man-made staple fibres of polyacrylonitrile;
synthetic man-made staple fibres of polyimide;
synthetic man-made staple fibres of polytetrafluoroethylene;
synthetic man-made staple fibres of poly(phenylene sulphide);
synthetic man-made staple fibres of poly(vinyl chloride);
other synthetic man-made staple fibres;
artificial man-made staple fibres of viscose;
other artificial man-made staple fibres;
yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped;
yarn made of polyurethane segmented with flexible segments of polyester, whether or not gimped;
products of heading 5605 (metallised yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film;
other products of heading 5605;
glass fibres;
metal fibres.
A yarn, of heading 5205, made from cotton fibres of heading 5203 and synthetic staple fibres of heading 5506, is a mixed yarn. Therefore, non-originating synthetic staple fibres which do not satisfy the origin rules may be used, provided that their total weight does not exceed 10 % of the weight of the yarn.
A woollen fabric, of heading 5112, made from woollen yarn of heading 5107 and synthetic yarn of staple fibres of heading 5509, is a mixed fabric. Therefore, synthetic yarn which does not satisfy the origin rules, or woollen yarn which does not satisfy the origin rules, or a combination of the two, may be used, provided that their total weight does not exceed 10 % of the weight of the fabric.
Tufted textile fabric, of heading 5802, made from cotton yarn of heading 5205 and cotton fabric of heading 5210, is only a mixed product if the cotton fabric is itself a mixed fabric made from yarns classified in two separate headings, or if the cotton yarns used are themselves mixtures.
If the tufted textile fabric concerned had been made from cotton yarn of heading 5205 and synthetic fabric of heading 5407, then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is, accordingly, a mixed product.
If a rule in the list provides that, for a particular textile item (such as trousers), yarn must be used, this does not prevent the use of metal items, such as buttons, because buttons are not classified within Chapters 50 to 63. For the same reason, it does not prevent the use of slide-fasteners, even though slide-fasteners normally contain textiles.
vacuum-distillation;
redistillation by a very thorough fractionation-process(1);
cracking;
reforming;
extraction by means of selective solvents;
the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally-active earth, activated earth, activated charcoal or bauxite;
polymerisation;
alkylation;
isomerisation.
vacuum-distillation;
redistillation by a very thorough fractionation-process(2);
cracking;
reforming;
extraction by means of selective solvents;
the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally-active earth, activated earth, activated charcoal or bauxite;
polymerisation;
alkylation;
isomerisation;
in respect of heavy oils of heading ex 2710 only, desulphurisation with hydrogen, resulting in a reduction of at least 85 % of the sulphur-content of the products processed (ASTM D 1266-59 T method);
in respect of products of heading 2710 only, deparaffining by a process other than filtering;
in respect of heavy oils of heading ex 2710 only, treatment with hydrogen, at a pressure of more than 20 bar and a temperature of more than 250 °C, with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment, with hydrogen, of lubricating oils of heading ex 2710 (e.g. hydrofinishing or decolourisation), in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;
in respect of fuel oils of heading ex 2710 only, atmospheric distillation, on condition that less than 30 % of these products distils, by volume, including losses, at 300 °C, by the ASTM D 86 method;
in respect of heavy oils other than gas oils and fuel oils of heading ex 2710 only, treatment by means of a high-frequency electrical brush-discharge.
in respect of crude products (other than petroleum jelly, ozokerite, lignite wax or peat wax, paraffin wax containing by weight less than 0,75 % of oil) of heading ex 2712 only, de-oiling by fractional crystallisation.
a See Introductory Note 4.2. | |||
b For the special conditions relating to ‘specific processes’, see Introductory Notes 8.1 and 8.3. | |||
c For the special conditions relating to ‘specific processes’, see Introductory Note 8.2. | |||
d A ‘group’ is regarded as any part of the heading separated from the rest by a semi-colon. | |||
e In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. | |||
f The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %. | |||
g For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6. | |||
h The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery. | |||
i See Introductory Note 7. | |||
j See Introductory Note 6. | |||
l For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 7. | |||
k SEMII – Semiconductor Equipment and Materials Institute Incorporated | |||
Harmonised System heading | Description of product | Qualifying operation (Working or processing, carried out on non-originating materials, which confers originating status) | |
---|---|---|---|
(1) | (2) | (3) | |
Chapter 1 | Live animals | All the animals of Chapter 1 are wholly obtained | |
Chapter 2 | Meat and edible meat offal | Manufacture in which all the meat and edible meat offal in the products of this chapter is wholly obtained | |
ex Chapter 3 | Fish and crustaceans, molluscs and other aquatic invertebrates, except for: | All fish and crustaceans, molluscs and other aquatic invertebrates are wholly obtained | |
0304 | Fish fillets and other fish meat (whether or not minced), fresh, chilled of frozen | Manufacture in which all the materials of Chapter 3 used are wholly obtained | |
0305 | Fish, dried, salted or in brine; smoked fish, whether or not cooked before or during the smoking process; flours, meals and pellets of fish, fit for human consumption | Manufacture in which all the materials of Chapter 3 used are wholly obtained | |
ex 0306 | Crustaceans, whether in shell or not, dried, salted or in brine; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine; flours, meals and pellets of crustaceans, fit for human consumption | Manufacture in which all the materials of Chapter 3 used are wholly obtained | |
ex 0307 | Molluscs, whether in shell or not, dried, salted or in brine; aquatic invertebrates other than crustaceans and molluscs, dried, salted or in brine; flours, meals and pellets of aquatic invertebrates other than crustaceans, fit for human consumption | Manufacture in which all the materials of Chapter 3 used are wholly obtained | |
Chapter 4 | Dairy produce; birds’ eggs; natural honey; edible products of animal origin, not elsewhere specified or included; | Manufacture in which:
| |
ex Chapter 5 | Products of animal origin, not elsewhere specified or included, except for: | Manufacture from materials of any heading | |
ex 0511 91 | Inedible fish eggs and roes | All the eggs and roes are wholly obtained | |
Chapter 6 | Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage | Manufacture in which all the materials of Chapter 6 used are wholly obtained | |
Chapter 7 | Edible vegetables and certain roots and tubers | Manufacture in which all the materials of Chapter 7 used are wholly obtained | |
Chapter 8 | Edible fruit and nuts; peel of citrus fruits or melons | Manufacture in which:
| |
Chapter 9 | Coffee, tea, maté and spices; | Manufacture from materials of any heading | |
Chapter 10 | Cereals | Manufacture in which all the materials of Chapter 10 used are wholly obtained | |
ex Chapter 11 | Products of the milling industry; malt; starches; inulin; wheat gluten; except for: | Manufacture in which all the materials of Chapters 10 and 11, headings 0701 and 2303, and sub-heading 0710 10 used are wholly obtained | |
ex 1106 | Flour, meal and powder of the dried, shelled leguminous vegetables of heading 0713 | Drying and milling of leguminous vegetables of heading 0708 | |
Chapter 12 | Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder | Manufacture from materials of any heading, except that of the product | |
Chapter 13 | Lac; gums, resins and other vegetable saps and extracts | Manufacture from materials of any heading, in which the weight of sugara used does not exceed 40 % of the weight of the final product | |
Chapter 14 | Vegetable plaiting materials; vegetable products not elsewhere specified or included | Manufacture from materials of any heading | |
ex Chapter 15 | Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes; except for: | Manufacture from materials of any sub-heading, except that of the product | |
1501 to 1504 | Fats from pig, poultry, bovine, sheep or goat, fish, etc. | Manufacture from materials of any heading except that of the product | |
1505, 1506 and 1520 | Wool grease and fatty substances derived therefrom (including lanolin). Other animal fats and oils and their fractions, whether or not refined, but not chemically modified.. Glycerol, crude; glycerol waters and glycerol lyes. | Manufacture from materials of any heading | |
1509 and 1510 | Olive oil and its fractions | Manufacture in which all the vegetable materials used are wholly obtained | |
1516 and 1517 | Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516 | Manufacture from materials of any heading, except that of the product, in which the weight of all the materials of Chapter 4 used does not exceed 40 % of the weight of the final product | |
Chapter 16 | Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates | Manufacture:
| |
ex Chapter 17 | Sugars and sugar confectionery; except for: | Manufacture from materials of any heading, except that of the product | |
ex 1702 | Other sugars, including chemically pure lactose and glucose, in solid form; sugar syrups; artificial honey, whether or not mixed with natural honey; caramel | Manufacture from materials of any heading, except that of the product, in which the weight of the materials of headings 1101 to 1108, 1701 and 1703 used does not exceed 30 % of the weight of the final product | |
ex 1702 | Chemically pure maltose and fructose | Manufacture from materials of any heading including other materials of heading 1702 | |
1704 | Sugar confectionery (including white chocolate), not containing cocoa | Manufacture from materials of any heading, except that of the product, in which: | |
Chapter 18 | Cocoa and cocoa preparations | Manufacture from materials of any heading, except that of the product, in which | |
Chapter 19 | Preparations of cereals, flour, starch or milk; pastrycooks’ products | Manufacture from materials of any heading, except that of the product, in which:
| |
ex Chapter 20 | Preparations of vegetables, fruit, nuts or other parts of plants; except for: | Manufacture from materials of any heading, except that of the product, in which the weight of sugara used does not exceed 40 % of the weight of the final product | |
2002 and 2003 | Tomatoes, mushrooms and truffles prepared or preserved otherwise than by vinegar of acetic acid | Manufacture in which all the materials of Chapters 7 and 8 used are wholly obtained | |
ex Chapter 21 | Miscellaneous edible preparations; except for: | Manufacture from materials of any heading, except that of the product, in which: | |
2103 | Sauces and preparations therefore; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard: | ||
-Sauces and preparations therefore; mixed condiments and mixed seasonings | Manufacture from materials of any heading, except that of the product. However, mustard flour or meal or prepared mustard may be used | ||
-Mustard flour and meal and prepared mustard | Manufacture from materials of any heading | ||
Chapter 22 | Beverages, spirits and vinegar | Manufacture from materials of any heading, except that of the product and headings 2207 and 2208, in which:
| |
ex Chapter 23 | Residues and waste from the food industries; prepared animal fodder; except for: | Manufacture from materials of any heading, except that of the product | |
ex 2303 | Residues of starch manufacture | Manufacture from materials of any heading, except that of the product, in which the weight of the materials of Chapter 10 used does not exceed 20 % of the weight of the final product | |
2309 | Preparations of a kind used in animal feeding | Manufacture from materials of any heading, except that of the product, in which:
| |
ex Chapter 24 | Tobacco and manufactured tobacco substitutes; except for: | Manufacture from materials of any heading in which the weight of materials of Chapter 24 used does not exceed 30 % of the total weight of materials of Chapter 24 used | |
2401 | Unmanufactured tobacco; tobacco refuse | All unmanufactured tobacco and tobacco refuse of Chapter 24 is wholly obtained | |
2402 | Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes | Manufacture from materials of any heading, except that of the product and of heading 2403, and in which the weight of materials of heading 2401 used does not exceed 50 % of the total weight of materials of heading 2401 used | |
ex Chapter 25 | Salt; sulphur; earths and stone; plastering materials, lime and cement; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 2519 | Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia | Manufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used | |
Chapter 26 | Ores, slag and ash | Manufacture from materials of any heading, except that of the product | |
ex Chapter 27 | Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 2707 | Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels | Operations of refining and/or one or more specific process(es)b or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product | |
2710 | Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils | Operations of refining and/or one or more specific process(es)c or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product | |
2711 | Petroleum gases and other gaseous hydrocarbons | Operations of refining and/or one or more specific process(es)c or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product | |
2712 | Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured | Operations of refining and/or one or more specific process(es)c or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product | |
2713 | Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals | Operations of refining and/or one or more specific process(es)b or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product | |
ex Chapter 28 | Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for: | (a)Least developed countries (hereinafter ‘LDCs’)Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 2811 | Sulphur trioxide | (a)LDCsManufacture from sulphur dioxide or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from sulphur dioxide or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 2840 | Sodium perborate | (a)LDCsManufacture from disodium tetraborate pentahydrate or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from disodium tetraborate pentahydrate or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
2843 | Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals | Manufacture from materials of any heading, including other materials of heading 2843 | |
ex 2852 | - -Mercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives | (a)LDCsManufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
- -Mercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds | (a)LDCsManufacture from materials of any heading. However, the value of all the materials of headings 2852, 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading. However, the value of all the materials of headings 2852, 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product | |
ex Chapter 29 | Organic chemicals; except for: | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 2905 | Metal alcoholates of alcohols of this heading and of ethanol; except for: | (a)LDCsManufacture from materials of any heading, including other materials of heading 2905. However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, including other materials of heading 2905. However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
2905 43; 2905 44; 2905 45 | Mannitol; D-glucitol (sorbitol); Glycerol | (a)LDCsManufacture from materials of any sub-heading, except that of the product. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any sub-heading, except that of the product. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
2915 | Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives | (a)LDCsManufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 2932 | -Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives | (a)LDCsManufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
-Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives | (a)LDCsManufacture from materials of any heading or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product | |
2933 | Heterocyclic compounds with nitrogen hetero-atom(s) only | (a)LDCsManufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
2934 | Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds | (a)LDCsManufacture from materials of any heading. However, the value of all the materials of headings 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading. However, the value of all the materials of headings 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
Chapter 30 | Pharmaceutical products | Manufacture from materials of any heading | |
Chapter 31 | Fertilisers | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
Chapter 32 | Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 33 | Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for: | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
3301 | Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils | (a)LDCsManufacture from materials of any heading, including materials of a different ‘group’d in this heading. However, materials of the same group as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 34 | Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster, except for: | Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 3404 | Artificial waxes and prepared waxes: - -With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax | Manufacture from materials of any heading | |
Chapter 35 | Albuminoidal substances; modified starches; glues; enzymes | (a)LDCsManufacture from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
Chapter 36 | Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
Chapter 37 | Photographic or cinematographic goods | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 38 | Miscellaneous chemical products; except for: | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 3803 | Refined tall oil | (a)LDCsRefining of crude tall oil or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesRefining of crude tall oil or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 3805 | Spirits of sulphate turpentine, purified | (a)LDCsPurification by distillation or refining of raw spirits of sulphate turpentine or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesPurification by distillation or refining of raw spirits of sulphate turpentine or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
3806 30 | Ester gums | (a)LDCsManufacture from resin acids or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from resin acids or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 3807 | Wood pitch (wood tar pitch) | (a)LDCsDistillation of wood tar or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesDistillation of wood tar or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
3809 10 | Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included: With a basis of amylaceous substances | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
3823 | Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols | (a)LDCsManufacture from materials of any heading, including other materials of heading 3823 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, including other materials of heading 3823 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
3824 60 | Sorbitol other than that of sub-heading 2905 44 | (a)LDCsManufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 39 | Plastics and articles thereof; except for: | (a)LDCsManufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 3907 | -Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) | (a)LDCsManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the producte or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the producte or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
-Polyester | (a)LDCsManufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product | |
ex 3920 | Ionomer sheets or film | (a)LDCsManufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 3921 | Foils of plastic, metallised | (a)LDCsManufacture from highly-transparent polyester-foils with a thickness of less than 23 micronf or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from highly-transparent polyester-foils with a thickness of less than 23 micronf or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 40 | Rubber and articles thereof; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
4012 | Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber: | ||
-Retreaded pneumatic, solid or cushion tyres, of rubber | Retreading of used tyres | ||
-Other | Manufacture from materials of any heading, except those of headings 4011 and 4012 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | ||
ex Chapter 41 | Raw hides and skins (other than furskins) and leather; except for: | Manufacture from materials of any heading, except that of the product | |
4101 to 4103 | Raw hides and skins of bovine (including buffalo) or equine animals (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split; raw skins of sheep or lambs (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not with wool on or split, other than those excluded by note 1(c) to Chapter 41; other raw hides and skins (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split, other than those excluded by note 1(b) or 1(c) to Chapter 41 | Manufacture from materials of any heading | |
4104 to 4106 | Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared | Re-tanning of tanned or pre-tanned hides and skins of sub-headings 4104 11, 4104 19, 4105 10, 4106 21, 4106 31 or 4106 91, or Manufacture from materials of any heading, except that of the product | |
4107, 4112, 4113 | Leather further prepared after tanning or crusting | Manufacture from materials of any heading, except that of the product. However, materials of sub-headings 4104 41, 4104 49, 4105 30, 4106 22, 4106 32 and 4106 92 may be used only if a re-tanning operation of the tanned or crust hides and skins in the dry state takes place | |
Chapter 42 | Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut) | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex Chapter 43 | Furskins and artificial fur; manufactures thereof; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
4301 | Raw furskins (including heads, tails, paws and other pieces or cuttings, suitable for furrier’s use), other than raw hides and skins of heading 4101, 4102 or 4103 | Manufacture from materials of any heading | |
ex 4302 | Tanned or dressed furskins, assembled: | ||
-Plates, crosses and similar forms | Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins | ||
-Other | Manufacture from non-assembled, tanned or dressed furskins | ||
4303 | Articles of apparel, clothing accessories and other articles of furskin | Manufacture from non-assembled tanned or dressed furskins of heading 4302 | |
ex Chapter 44 | Wood and articles of wood; wood charcoal; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 4407 | Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed | Planing, sanding or end-jointing | |
ex 4408 | Sheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed | Splicing, planing, sanding or endjointing | |
ex 4410 to ex 4413 | Beadings and mouldings, including moulded skirting and other moulded boards | Beading or moulding | |
ex 4415 | Packing cases, boxes, crates, drums and similar packings, of wood | Manufacture from boards not cut to size | |
ex 4418 | -Builders’ joinery and carpentry of wood | Manufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used | |
-Beadings and mouldings | Beading or moulding | ||
ex 4421 | Match splints; wooden pegs or pins for footwear | Manufacture from wood of any heading, except drawn wood of heading 4409 | |
Chapter 45 | Cork and articles of cork | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 46 | Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 47 | Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 48 | Paper and paperboard; articles of paper pulp, of paper or of paperboard | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 49 | Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex Chapter 50 | Silk; except for: | Manufacture from materials of any heading, except that of the product | |
ex 5003 | Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed | Carding or combing of silk waste | |
5004 to ex 5006 | Silk yarn and yarn spun from silk waste | Spinning of natural fibres or extrusion of man-made fibres accompanied by spinning or twistingg | |
5007 | Woven fabrics of silk or of silk waste: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn or twisting, in each case accompanied by weaving or Weaving accompanied by dyeing or Yarn dyeing accompanied by weaving or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the productg |
ex Chapter 51 | Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for: | Manufacture from materials of any heading, except that of the product | |
5106 to 5110 | Yarn of wool, of fine or coarse animal hair or of horsehair | Spinning of natural fibres or extrusion of man-made fibres accompanied by spinningg | |
5111 to 5113 | Woven fabrics of wool, of fine or coarse animal hair or of horsehair: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or Yarn dyeing accompanied by weaving or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg |
ex Chapter 52 | Cotton; except for: | Manufacture from materials of any heading, except that of the product | |
5204 to 5207 | Yarn and thread of cotton | Spinning of natural fibres or extrusion of man-made fibres accompanied by spinningg | |
5208 to 5212 | Woven fabrics of cotton: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or by coating or Yarn dyeing accompanied by weaving or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg |
ex Chapter 53 | Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for: | Manufacture from materials of any heading, except that of the product | |
5306 to 5308 | Yarn of other vegetable textile fibres; paper yarn | Spinning of natural fibres or extrusion of man-made fibres accompanied by spinningg | |
5309 to 5311 | Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or by coating or Yarn dyeing accompanied by weaving or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg |
5401 to 5406 | Yarn, monofilament and thread of man-made filaments | Extrusion of man-made fibres accompanied by spinning or spinning of natural fibresg | |
5407 and 5408 | Woven fabrics of man-made filament yarn: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or by coating or Twisting or texturing accompanied by weaving provided that the value of the non-twisted/non-textured yarns used does not exceed 47,5 % of the ex-works price of the product or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg |
5501 to 5507 | Man-made staple fibres | Extrusion of man-made fibres | |
5508 to 5511 | Yarn and sewing thread of man-made staple fibres | Spinning of natural fibres or extrusion of man-made fibres accompanied by spinningg | |
5512 to 5516 | Woven fabrics of man-made staple fibres: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or by coating or Yarn dyeing accompanied by weaving or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg |
Ex Chapter 56 | Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for: | Extrusion of man-made fibres accompanied by spinning or spinning of natural fibres or Flocking accompanied by dyeing or printingg | |
5602 | Felt, whether or not impregnated, coated, covered or laminated: | ||
- -Needleloom felt | Extrusion of man-made fibres accompanied by fabric formation, However:
of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product or Fabric formation alone in the case of felt made from natural fibresg | ||
- -Other | Extrusion of man-made fibres accompanied by fabric formation, or Fabric formation alone in the case of other felt made from natural fibresg | ||
5603 | Nonwovens, whether or not impregnated, coated, covered or laminated | (a)LDCsAny non-woven process including needle punching | (b)Other beneficiary countriesExtrusion of man-made fibres, or use of natural fibres, accompanied by nonwoven techniques including needle punching |
5604 | Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics: | ||
- -Rubber thread and cord, textile covered | Manufacture from rubber thread or cord, not textile covered | ||
- -Other | Extrusion of man-made fibres accompanied by spinning or spinning of natural fibresg | ||
5605 | Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal | Extrusion of man-made fibres accompanied by spinning or spinning of natural and/or man-made staple fibresg | |
5606 | Gimped yarn, and strip and the like of heading 5404 or 5405, gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn | Extrusion of man-made fibres accompanied by spinning or spinning of natural and/or man-made staple fibres or Spinning accompanied with flocking or Flocking accompanied by dyeingg | |
Chapter 57 | Carpets and other textile floor coverings: | Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Manufacture from coir yarn or sisal yarn or jute yarn or Flocking accompanied by dyeing or by printing or Tufting accompanied by dyeing or by printing Extrusion of man-made fibres accompanied by non-woven techniques including needle punchingg However:
of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product Jute fabric may be used as a backing | |
Ex Chapter 58 | Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for: | (a)LDCsWeavingg or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | (b)Other beneficiary countriesSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or flocking or coating or Flocking accompanied by dyeing or by printing or Yarn dyeing accompanied by weaving or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg |
5805 | Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up | Manufacture from materials of any heading, except that of the product | |
5810 | Embroidery in the piece, in strips or in motifs | Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product | |
5901 | Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations | Weaving accompanied by dyeing or by flocking or by coating or Flocking accompanied by dyeing or by printing | |
5902 | Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon: | ||
- -Containing not more than 90 % by weight of textile materials | Weaving | ||
- -Other | Extrusion of man-made fibres accompanied by weaving | ||
5903 | Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902 | Weaving accompanied by dyeing or by coating or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | |
5904 | Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape | Weaving accompanied by dyeing or by coatingg | |
5905 | Textile wall coverings: | ||
- -Impregnated, coated, covered or laminated with rubber, plastics or other materials | Weaving accompanied by dyeing or by coating | ||
- -Other | Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving or Weaving accompanied by dyeing or by coating or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg: | ||
5906 | Rubberised textile fabrics, other than those of heading 5902: | ||
- -Knitted or crocheted fabrics | Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting or Knitting accompanied by dyeing or by coating or Dyeing of yarn of natural fibres accompanied by knittingg | ||
- -Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials | Extrusion of man-made fibres accompanied by weaving | ||
- -Other | Weaving accompanied by dyeing or by coating or Dyeing of yarn of natural fibres accompanied by weaving | ||
5907 | Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like | Weaving accompanied by dyeing or by flocking or by coating or Flocking accompanied by dyeing or by printing or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product | |
5908 | Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefor, whether or not impregnated: | ||
- -Incandescent gas mantles, impregnated | Manufacture from tubular knitted gas-mantle fabric | ||
- -Other | Manufacture from materials of any heading, except that of the product | ||
5909 to 5911 | Textile articles of a kind suitable for industrial use: | ||
- -Polishing discs or rings other than of felt of heading 5911 | Weaving | ||
- -Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911 | (a)LDCsWeavingg | (b)Other beneficiary countriesExtrusion of man-made fibres or Spinning of natural and/or of man-made staple fibres, in each case accompanied by weaving or Weaving accompanied by dyeing or by coating Only the following yarns may be used:
| |
- -Other | Extrusion of man-made filament yarn or spinning of natural or man-made staple fibres, accompanied by weavingg or Weaving accompanied by dyeing or by coating | ||
Chapter 60 | Knitted or crocheted fabrics | Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting or Knitting accompanied by dyeing or by flocking or by coating or Flocking accompanied by dyeing or by printing or Dyeing of yarn of natural fibres accompanied by knitting or Twisting or texturing accompanied by knitting provided that the value of the non-twisted/non-textured yarns used does not exceed 47,5 % of the ex-works price of the product | |
Chapter 61 | Articles of apparel and clothing accessories, knitted or crocheted: | ||
- -Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form | (a)LDCsManufacture from fabric | (b)Other beneficiary countries | |
- -Other | Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting (knitted to shape products) or Dyeing of yarn of natural fibres accompanied by knitting (knitted to shape products)g | ||
Ex Chapter 62 | Articles of apparel and clothing accessories, not knitted or crocheted; except for: | (a)LDCsManufacture from fabric | (b)Other beneficiary countriesWeaving accompanied by making-up (including cutting) or Making-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg i |
ex 6202, ex 6204, ex 6206, ex 6209 and ex 6211 | Women’s, girls’ and babies’ clothing and clothing accessories for babies, embroidered | (a)LDCsChapter rule applies | (b)Other beneficiary countriesWeaving accompanied by making-up (including cutting) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the producti i |
ex 6212 | Brassieres, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, knitted or crocheted | ||
- -Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form | (a)LDCsManufacture from fabric | (b)Other beneficiary countries | |
-Other | Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting (knitted to shape products) or Dyeing of yarn of natural fibres accompanied by knitting (knitted to shape products)j | ||
ex 6210 and ex 6216 | Fire-resistant equipment of fabric covered with foil of aluminised polyester | (a)LDCsChapter rule applies | (b)Other beneficiary countriesWeaving accompanied by making-up (including cutting) or Coating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product, accompanied by making-up (including cutting)i |
6213 and 6214 | Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like: | ||
- -Embroidered | Weaving accompanied by making-up (including cutting) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the producti or Making-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg i | ||
- -Other | Weaving accompanied by making-up (including cutting) or Making-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the productg i | ||
6217 | Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212: | ||
- -Embroidered | Weaving accompanied by making-up (including cutting) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the producti | ||
- -Fire-resistant equipment of fabric covered with foil of aluminised polyester | Weaving accompanied by making-up (including cutting) or Coating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product, accompanied by making-up (including cutting)i | ||
- -Interlinings for collars and cuffs, cut out | Manufacture from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product | ||
- -Other | (a)LDCsChapter rule applies | (b)Other beneficiary countriesWeaving accompanied by making-up (including cutting)i | |
Ex Chapter 63 | Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for: | Manufacture from materials of any heading, except that of the product | |
6301 to 6304 | Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles: | ||
- -Of felt, of nonwovens | (a)LDCsAny non-woven process including needle punching accompanied by making up (including cutting) | (b)Other beneficiary countriesExtrusion of man-made fibres or use of natural fibres in each case accompanied by non-woven process including needle punching and making-up (including cutting)g | |
- -Other: | |||
- -Embroidered | Weaving or knitting accompanied by making-up (including cutting) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the producti l | ||
- -Other | Weaving or knitting accompanied by making-up (including cutting) | ||
6305 | Sacks and bags, of a kind used for the packing of goods | (a)LDCsWeaving or knitting and making-up (including cutting)g | (b)Other beneficiary countriesExtrusion of man-made fibres or spinning of natural and/or man-made staple fibres accompanied by weaving or knitting and making-up (including cutting)g |
6306 | Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods: | ||
- -Of nonwovens | (a)LDCsAny non-woven process including needle punching accompanied by making up (including cutting) | (b)Other beneficiary countriesExtrusion of man-made fibres or natural fibres in each case accompanied by any non-woven techniques including needle punching | |
- -Other | Weaving accompanied by making-up (including cutting)g i or Coating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product, accompanied by making-up (including cutting) | ||
6307 | Other made-up articles, including dress patterns | Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product | |
6308 | Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale | (a)LDCsEach item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 25 % of the ex-works price of the set | (b)Other beneficiary countriesEach item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set |
Ex Chapter 64 | Footwear, gaiters and the like; parts of such articles; except for: | Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406 | |
6406 | Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof | Manufacture from materials of any heading, except that of the product | |
Chapter 65 | Headgear and parts thereof | Manufacture from materials of any heading, except that of the product | |
Chapter 66 | Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 67 | Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair | Manufacture from materials of any heading, except that of the product | |
ex Chapter 68 | Articles of stone, plaster, cement, asbestos, mica or similar materials, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 6803 | Articles of slate or of agglomerated slate | Manufacture from worked slate | |
ex 6812 | Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate | Manufacture from materials of any heading | |
ex 6814 | Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials | Manufacture from worked mica (including agglomerated or reconstituted mica) | |
Chapter 69 | Ceramic products | (a)LDCsManufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 70 | Glass and glassware, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
7006 | Glass of heading 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials: | ||
-Glass-plate substrates, coated with a dielectric thin film, and of a semiconductor grade in accordance with SEMII-standardsh | Manufacture from non-coated glass-plate substrate of heading 7006 | ||
-Other | Manufacture from materials of heading 7001 | ||
7010 | Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass | Manufacture from materials of any heading, except that of the product or Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product | |
7013 | Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018) | Manufacture from materials of any heading, except that of the product or Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product or Hand-decoration (except silk-screen printing) of hand-blown glassware, provided that the total value of the hand-blown glassware used does not exceed 50 % of the ex-works price of the product | |
ex 7019 | Articles (other than yarn) of glass fibres | Manufacture from:
| |
ex Chapter 71 | Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
7106, 7108 and 7110 | Precious metals: | ||
-Unwrought | Manufacture from materials of any heading, except those of headings 7106, 7108 and 7110 or Electrolytic, thermal or chemical separation of precious metals of heading 7106, 7108 or 7110 or Fusion and/or alloying of precious metals of heading 7106, 7108 or 7110 with each other or with base metals | ||
-Semi-manufactured or in powder form | Manufacture from unwrought precious metals | ||
ex 7107, ex 7109 and ex 7111 | Metals clad with precious metals, semi-manufactured | Manufacture from metals clad with precious metals, unwrought | |
7115 | Other articles of precious metal or of metal clad with precious metal | Manufacture from materials of any heading, except that of the product | |
7117 | Imitation jewellery | Manufacture from materials of any heading, except that of the product or Manufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product | |
ex Chapter 72 | Iron and steel; except for: | Manufacture from materials of any heading, except that of the product | |
7207 | Semi-finished products of iron or non-alloy steel | Manufacture from materials of heading 7201, 7202, 7203, 7204, 7205 or 7206 | |
7208 to 7216 | Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel | Manufacture from ingots or other primary forms or semi-finished materials of heading 7206 or 7207 | |
7217 | Wire of iron or non-alloy steel | Manufacture from semi-finished materials of heading 7207 | |
7218 91 and 7218 99 | Semi-finished products | Manufacture from materials of heading 7201, 7202, 7203, 7204, 7205 or sub-heading 7218 10 | |
7219 to 7222 | Flat-rolled products, bars and rods, angles, shapes and sections of stainless steel | Manufacture from ingots or other primary forms or semi-finished materials of heading 7218 | |
7223 | Wire of stainless steel | Manufacture from semi-finished materials of heading 7218 | |
7224 90 | Semi-finished products | Manufacture from materials of heading 7201, 7202, 7203, 7204, 7205 or sub-heading 7224 10 | |
7225 to 7228 | Flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | Manufacture from ingots or other primary forms or semi-finished materials of heading 7206, 7207, 7218 or 7224 | |
7229 | Wire of other alloy steel | Manufacture from semi-finished materials of heading 7224 | |
ex Chapter 73 | Articles of iron or steel; except for: | Manufacture from materials of any heading, except that of the product | |
ex 7301 | Sheet piling | Manufacture from materials of heading 7207 | |
7302 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails | Manufacture from materials of heading 7206 | |
7304, 7305 and 7306 | Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel | Manufacture from materials of heading 7206, 7207, 7208, 7209, 7210, 7211, 7212, 7218, 7219, 7220 or 7224 | |
ex 7307 | Tube or pipe fittings of stainless steel | Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product | |
7308 | Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel | Manufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used | |
ex 7315 | Skid chain | Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product | |
ex Chapter 74 | Copper and articles thereof; except for: | Manufacture from materials of any heading, except that of the product | |
7403 | Refined copper and copper alloys, unwrought | Manufacture from materials of any heading | |
Chapter 75 | Nickel and articles thereof | Manufacture from materials of any heading, except that of the product | |
ex Chapter 76 | Aluminium and articles thereof; except for: | Manufacture from materials of any heading, except that of the product | |
7601 | Unwrought aluminium | Manufacture from materials of any heading | |
7607 | Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm | Manufacture from materials of any heading, except that of the product and heading 7606 | |
Chapter 77 | Reserved for possible future use in the Harmonised System | ||
ex Chapter 78 | Lead and articles thereof, except for: | Manufacture from materials of any heading, except that of the product | |
7801 | Unwrought lead: | ||
-Refined lead | Manufacture from materials of any heading | ||
-Other | Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7802 may not be used | ||
Chapter 79 | Zinc and articles thereof | Manufacture from materials of any heading, except that of the product | |
Chapter 80 | Tin and articles thereof | Manufacture from materials of any heading, except that of the product | |
Chapter 81 | Other base metals; cermets; articles thereof | Manufacture from materials of any heading | |
ex Chapter 82 | Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
8206 | Tools of two or more of the headings 8202 to 8205, put up in sets for retail sale | Manufacture from materials of any heading, except those of headings 8202 to 8205. However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 % of the ex-works price of the set | |
8211 | Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades therefor | Manufacture from materials of any heading, except that of the product. However, knife blades and handles of base metal may be used | |
8214 | Other articles of cutlery (for example; hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files) | Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used | |
8215 | Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware | Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used | |
ex Chapter 83 | Miscellaneous articles of base metal; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 8302 | Other mountings, fittings and similar articles suitable for buildings, and automatic door closers | Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product | |
ex 8306 | Statuettes and other ornaments, of base metal | Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product | |
ex Chapter 84 | Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
8401 | Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
8407 | Spark-ignition reciprocating or rotary internal combustion piston engines | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8408 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8427 | Fork-lift trucks; other works trucks fitted with lifting or handling equipment | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
8482 | Ball or roller bearings | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 85 | Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
8501, 8502 | Electric motors and generators; Electric generating sets and rotary converters | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8503 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8503 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8513 | Portable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading 8512 | (a)LDCsManufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8519 | Sound recording and sound reproducing apparatus | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8522 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8522 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8521 | Video recording or reproducing apparatus, whether or not incorporating a video tuner | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8522 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8522 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8523 | Discs, tapes, solid-state non-volatile storage devices, ‘smart cards’ and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of Chapter 37 | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8525 | Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and other video camera recorders | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8526 | Radar apparatus, radio navigational aid apparatus and radio remote control apparatus | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8527 | Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8528 | Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8529 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8535 to 8537 | Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity | (a)LDCsManufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8540 11 and 8540 12 | Cathode ray television picture tubes, including video monitor cathode ray tubes | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex 8542 31, ex 8542 32, ex 8542 33, ex 8542 39 | Monolithic integrated circuits | Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product or The operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a non-party | |
8544 | Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8545 | Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
8546 | Electrical insulators of any material | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8547 | Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8548 | Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
Chapter 86 | Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex Chapter 87 | Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for: | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
8711 | Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars | (a)LDCsManufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
ex Chapter 88 | Aircraft, spacecraft, and parts thereof, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 8804 | Rotochutes | Manufacture from materials of any heading, including other materials of heading 8804 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 89 | Ships, boats and floating structures | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex Chapter 90 | Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
9002 | Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
9033 | Parts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90 | (a)LDCsManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | (b)Other beneficiary countriesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
Chapter 91 | Clocks and watches and parts thereof | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 92 | Musical instruments; parts and accessories of such articles | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
Chapter 93 | Arms and ammunition; parts and accessories thereof | Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product | |
Chapter 94 | Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex Chapter 95 | Toys, games and sports requisites; parts and accessories thereof, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
ex 9506 | Golf clubs and parts thereof | Manufacture from materials of any heading, except that of the product. However, roughly-shaped blocks for making golf-club heads may be used | |
ex Chapter 96 | Miscellaneous manufactured articles, except for: | Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
9601 and 9602 | Worked ivory, bone, tortoiseshell, horn, antlers, coral, mother-of-pearl and other animal carving material, and articles of these materials (including articles obtained by moulding. Worked vegetable or mineral carving material and articles of these materials; moulded or carved articles of wax, of stearin, of natural gums or natural resins or of modelling pastes, and other moulded or carved articles, not elsewhere specified or included; worked, unhardened gelatine (except gelatine of heading 3503) and articles of unhardened gelatin | Manufacture from materials of any heading | |
9603 | Brooms, brushes (including brushes constituting parts of machines, appliances or vehicles), hand-operated mechanical floor sweepers, not motorized, mops and feather dusters; prepared knots and tufts for broom or brush making; paint pads and rollers, squeegees (other than roller squeegees) | Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product | |
9605 | Travel sets for personal toilet, sewing or shoe or clothes cleaning | Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set | |
9606 | Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks | Manufacture:
| |
9608 | Ball-point pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609 | Manufacture from materials of any heading, except that of the product. However, nibs or nib-points of the same heading as the product may be used | |
9612 | Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes | Manufacture:
| |
9613 20 | Pocket lighters, gas fuelled, refillable | Manufacture in which the total value of the materials of heading 9613 used does not exceed 30 % of the ex-works price of the product | |
9614 | Smoking pipes (including pipe bowls) and cigar or cigarette holders, and parts thereof | Manufacture from materials of any heading | |
Chapter 97 | Works of art, collectors’ pieces and antiques | Manufacture from materials of any heading, except that of the product |
See Additional note 5(b) to Chapter 27 of the Combined Nomenclature.
See Additional Note 5(b) to Chapter 27 of the Combined Nomenclature.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Regulation you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: