xmlns:atom="http://www.w3.org/2005/Atom"
1.For the purposes of the provisions concerning preferential tariff measures adopted unilaterally by the Union for certain countries, groups of countries or territories (hereinafter referred to as ‘beneficiary country or territory’), with the exception of those referred to in Subsection 2 of this section and the overseas countries and territories associated with the Union, the following products shall be considered as products originating in a beneficiary country or territory:
(a)products wholly obtained in that beneficiary country or territory within the meaning of Article 60;
(b)products obtained in that beneficiary country or territory, in the manufacture of which products other than those referred to in point (a) are used, provided that those products have undergone sufficient working or processing within the meaning of Article 61.
2.For the purposes of this subsection, products originating in the Union, within the meaning of paragraph 3 of this Article, which are subject in a beneficiary country or territory to working or processing going beyond that described in Article 62 shall be considered as originating in that beneficiary country or territory.
3.Paragraph 1 shall apply mutatis mutandis in establishing the origin of the products obtained in the Union.
1.The following shall be considered as wholly obtained in a beneficiary country or territory or in the Union:
(a)mineral products extracted from its soil or from its seabed;
(b)vegetable products harvested there;
(c)live animals born and raised there;
(d)products from live animals raised there;
(e)products from slaughtered animals born and raised there;
(f)products obtained by hunting or fishing conducted there;
(g)products of sea-fishing and other products taken from the sea outside the territorial waters by its vessels;
(h)products made on board its factory ships exclusively from the products referred to in (g);
(i)used articles collected there, fit only for the recovery of raw materials;
(j)waste and scrap resulting from manufacturing operations conducted there;
(k)products extracted from the seabed or below the seabed which is situated outside its territorial waters but where the beneficiary country or territory or a Member State has exclusive exploitation rights;
(l)goods produced there exclusively from products specified in (a) to (k).
2.The terms ‘its vessels’ and ‘its factory ships’ in paragraph 1(g) and (h) shall apply only to vessels and factory ships which fulfil the following conditions:
(a)they are registered or recorded in the beneficiary country or territory or in a Member State;
(b)they sail under the flag of a beneficiary country or territory or of a Member State;
(c)they are owned to the extent of at least 50 % by nationals of the beneficiary country or territory or of Member States or by a company with its head office in that beneficiary country or territory or in one of the Member States, of which the manager or managers, chairman of the board of directors or of the supervisory board, and the majority of the members of such boards are nationals of that beneficiary country or territory or of the Member States and of which, in addition, in the case of companies, at least half the capital belongs to that beneficiary country or territory or to the Member States or to public bodies or nationals of that beneficiary country or territory or of the Member States;
(d)the master and officers of the vessels and factory ships are nationals of the beneficiary country or territory or of the Member States;
(e)at least 75 % of the crew are nationals of the beneficiary country or territory or of the Member States.
3.The terms ‘beneficiary country or territory’ and ‘Union’ shall also cover the territorial waters of that beneficiary country or territory or of the Member States.
4.Vessels operating on the high seas, including factory ships on which the fish caught is worked or processed, shall be considered as part of the territory of the beneficiary country or territory or of the Member State to which they belong, provided that they satisfy the conditions set out in paragraph 2.
For the purposes of Article 59, products which are not wholly obtained in a beneficiary country or territory or in the Union shall be considered to be sufficiently worked or processed provided that the conditions set out in the list in Annex 22-11 are fulfilled.
Those conditions indicate, for all products covered by this Subsection, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials.
If a product which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.
1.Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 61 are satisfied:
(a)preserving operations to ensure that the products remain in good condition during transport and storage;
(b)breaking-up and assembly of packages;
(c)washing, cleaning; removal of dust, oxide, oil, paint or other coverings;
(d)ironing or pressing of textiles and textile articles;
(e)simple painting and polishing operations;
(f)husking, partial or total milling, polishing and glazing of cereals and rice;
(g)operations to colour or flavour sugar or form sugar lumps; partial or total milling of sugar;
(h)peeling, stoning and shelling, of fruits, nuts and vegetables;
(i)sharpening, simple grinding or simple cutting;
(j)sifting, screening, sorting, classifying, grading, matching (including the making-up of sets of articles);
(k)simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;
(l)affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;
(m)simple mixing of products, whether or not of different kinds; mixing of sugar with any material;
(n)simple addition of water or dilution or dehydration or denaturation of products;
(o)simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;
(p)slaughter of animals;
(q)a combination of two or more of the operations specified in points (a) to (p).
2.All the operations carried out in either a beneficiary country or territory or in the Union on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.
1.The unit of qualification for the application of the provisions of this Subsection shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.
Accordingly, it follows that:
(a)when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;
(b)when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this Subsection.
2.Where, under general interpretative rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.
1.By way of derogation from the provisions of Article 61, non-originating materials may be used in the manufacture of a given product, provided that their total value does not exceed 10 % of the ex-works price of the product.
Where, in the list, one or several percentages are given for the maximum value of non-originating materials, such percentages must not be exceeded through the application of the first subparagraph.
2.Paragraph 1 shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.
Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.
Sets, as defined in general interpretative rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating products. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.
In order to determine whether a product is an originating product, it shall not be necessary to determine the origin of the following which might be used in its manufacture:
energy and fuel;
plant and equipment;
machines and tools;
goods which do not enter, and which are not intended to enter, into the final composition of the product.