- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2015/2450 of 2 December 2015 laying down implementing technical standards with regard to the templates for the submission of information to the supervisory authorities according to Directive 2009/138/EC of the European Parliament and of the Council (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Commission Implementing Regulation (EU) 2015/2450,
S.25.02 — Solvency Capital Requirement — for undertakings using the standard formula and partial internal model
is up to date with all changes known to be in force on or before 17 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
EUR 2015 No. 2450 may be subject to amendment by EU Exit Instruments made by the Prudential Regulation Authority under powers set out in The Financial Regulators' Powers (Technical Standards etc.) (Amendment etc.) (EU Exit) Regulations 2018 (S.I. 2018/1115), regs. 2, 3, Sch. Pt. 2. These amendments are not currently available on legislation.gov.uk. Details of relevant amending instruments can be found on their website/s.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
General comments:
This section relates to opening and annual submission of information for individual entities, ring fenced–funds, matching adjustment portfolios and remaining part.
The components to be reported shall be agreed between national supervisory authorities and insurance and reinsurance undertakings.
Template SR.25.02 shall be reported by ring–fenced fund, matching adjustment portfolio and the remaining part for every undertaking under a partial internal model. This includes undertakings where a partial internal model is applied to a full ring–fenced fund and/or matching adjustment portfolio while the other ring–fenced funds and/or matching adjustment portfolios are under the standard formula. This template shall be reported for all sub–funds of a material RFF/MAP as identified in the second table of S.01.03.
For those undertakings under a partial internal model to which the adjustment due to the aggregation of the nSCR of RFF/MAP is applicable, where the entity has MAP or RFF (except those under the scope of Article 304 of Directive 2009/138/EC) when reporting at the level of the whole undertaking, the nSCR at risk module level and the loss–absorbing capacity (LAC) of technical provisions and deferred taxes to be reported shall be calculated as follows:
Where the undertaking applies the full adjustment due to the aggregation of the nSCR of the RFF/MAP at entity level: the nSCR is calculated as if no RFF and the LAC shall be calculated as the sum of the LAC across all RFF/MAP and remaining part;
Where the undertaking applies the Simplification at risk sub–module level to aggregate the nSCR of the RFF/MAP at entity level the the nSCR and LAC are calculated considering a direct summation at sub–module level method,
Where the undertaking applies the Simplification at risk module level to aggregate the nSCR of the RFF/MAP at entity level the nSCR and LAC are calculated considering a direct summation at module level method.
The adjustment due to the aggregation of the nSCR of the RFF/MAP at entity level shall be allocated (C0060) to the relevant risk modules (i.e. market risk, counterparty default risk, life underwriting risk, health underwriting risk and non–life underwriting risk) when calculated according to the standard formula. The amount to be allocated to each relevant risk module shall be calculated as follows:
=
Adjustment calculated according to one of the three methods referred above
=
Basic solvency capital requirement calculated according the information reported in this template
=
nSCR for intangible assets risk according to the information reported in this template
Multiplication of this ‘q factor’ by the nSCR of each relevant risk module (i.e. market risk, counterparty default risk, life underwriting risk, health underwriting risk and non–life underwriting risk)
a [F1Guidelines EIOPA-BoS-14/177 of 2 February 2015 on the loss-absorbing capacity of technical provisions and deferred taxes (https://eiopa.europa.eu/publications/eiopa-guidelines/guidelines-on-the-loss-absorbing-capacity-of-technical-provisions-and-deferred-taxes).] | ||
ITEM | INSTRUCTIONS | |
---|---|---|
Z0020 | Ring–fenced fund, matching adjustment portfolio or Remaining Part | Identifies whether the reported figures are with regard to a RFF, matching adjustment portfolio or to the remaining part. One of the options in the following closed list shall be used:
|
Z0030 | Fund/Portfolio number | When item Z0020 = 1, identification number for a ring fenced fund or matching adjustment portfolio. This number is attributed by the undertaking and must be consistent over time and with the fund/portfolio number reported in other templates. [F2When item Z0020 = 2, then report ‘0]’ |
C0010 | Unique number of component | Unique number of each component agreed with their national supervisory authority to identify uniquely components from their model. This number shall always be used with the appropriate component description reported in each item. Where the partial internal model allow the same split by risk module as the one in the standard formula, the following numbers of components shall be used:
Where standard formula risk modules cannot be reported, undertaking shall attribute a number to each component different from 1 to 7. This number shall always be used with the appropriate component description reported in each item C0030. The numbers of the components shall be kept consistent over time. |
C0020 | Components description | Identification, using free text, of each of the components that can be identified by the undertaking. These components shall be aligned with standard formula risk modules if possible according to the partial internal model. Each component shall be identified using a separate entry. Undertakings shall identify and report components consistently across different reporting periods, unless there has been some change to the internal model affecting the categories. Loss–absorbing capacity of technical provisions and/or deferred taxes not embedded within components shall be reported as separated components. |
C0030 | Calculation of the Solvency Capital Requirement | Amount of the capital charge for each component regardless of the method of calculation (either standard formula or partial internal model), after the adjustments for loss–absorbing capacity of technical provision and/or deferred taxes when they are embedded in the component calculation. For the components Loss absorbing capacity (‘LAC’) of technical provisions and/or deferred taxes when reported as a separate component it shall be the amount of the loss–absorbing capacity (these amounts shall be reported as negative values) For components calculated using the standard formula this cell represents the gross nSCR. For components calculated using the partial internal model, this represents the value considering the future management actions which are embedded in the calculation, but not those which are modelled as a separate component. This amount shall fully consider diversification effects according to Article 304 of Directive 2009/138/EC where applicable where applicable. When applicable, this cell does not include the allocation of the adjustment due to the aggregation of the nSCR of the RFF/MAP at entity level. |
C0050 | Allocation from adjustments due to RFF and Matching adjustment portfolios | Where applicable, part of the adjustment allocated to each risk module according to the procedure described in the general comments. This amount shall be positive. |
C0060 | Consideration of the future management actions regarding technical provisions and/or deferred taxes | To identify if the future management actions relating to the loss absorbing capacity of technical provisions and/or deferred taxes are embedded in the calculation, the following closed list of options shall be used:
|
C0070 | Amount modelled | For each component this cell represents the amount calculated according to the partial internal model. |
R0110/C0100 | Total of undiversified components | Sum of all components. |
R0060/C0100 | Diversification | The total amount of the diversification among components reported in C0030. This amount does not include diversification effects inside each component, which shall be embedded in the values reported in C0030. This amount shall be reported as negative value. |
R0120/C0100 | Adjustment due to RFF/MAP nSCR aggregation | When applicable, adjustment to correct the bias on SCR calculation due to aggregation of RFF/MAP nSCR at risk module level. |
R0160/C0100 | Capital requirement for business operated in accordance with Art. 4 of Directive 2003/41/EC | Amount of the capital requirement, calculated according to the rules stated in article 17 of Directive 2003/41/EC, for ring–fenced funds relating to pension business operated under article 4 of Directive 2003/41/EC to which transitional measures are applied. This item is to be reported only during the transitional period. |
R0200/C0100 | Solvency capital requirement, excluding capital add–ons | Amount of the total diversified SCR before any capital add–on. |
R0210/C0100 | Capital add–ons already set | Amount of capital add–ons that had been set at the reporting reference date. It will not include capital add–ons set between that date and the submission of the data to the supervisory authority, nor any set after the submission of the data. |
R0220/C0100 | Solvency Capital Requirement | Overall capital requirement including capital add–ons |
Other information on SCR | ||
R0300/C0100 | Amount/Estimate of the overall loss–absorbing capacity of technical provisions | Amount/Estimate of the overall adjustment for loss–absorbing capacity of technical provisions, including the part embedded in the components and the part reported as a single component. This amount shall be reported as a negative amount. |
R0310/C0100 | Amount/Estimate of the loss absorbing capacity for deferred taxes | Amount/Estimate of the overall adjustment for loss–absorbing capacity for deferred taxes, including the part embedded in the components and the part reported as a single component. This amount shall be reported as a negative amount. |
R0400/C0100 | Capital requirement for duration–based equity risk sub–module | Amount of the capital requirement for duration–based equity risk sub–module. |
R0410/C0100 | Total amount of notional Solvency Capital Requirements for remaining part | Amount of the notional SCRs of remaining part when undertaking has RFF. |
R0420/C0100 | Total amount of Notional Solvency Capital Requirements for ring fenced funds | Amount of the sum of notional SCRs of all ring–fenced funds when undertaking has RFF (other than those related to business operated in accordance with Article 4 of Directive 2003/41/EC (transitional)). |
R0430/C0100 | Total amount of Notional Solvency Capital Requirements for matching adjustment portfolios | Amount of the sum of notional SCRs of all matching adjustment portfolios This item does not have to be reported when reporting SCR calculation at RFF or matching adjustment portfolio level. |
R0440/C0100 | Diversification effects due to RFF nSCR aggregation for article 304 | Amount of the adjustment for a diversification effect between ring fenced funds under Article 304 of Directive 2009/138/EC and the remaining part where applicable. It shall be equal to the difference between the sum of the nSCR for each RFF/MAP/RP and the SCR reported in R0200/C0100. |
R0450/C0100 | Method used to calculate the adjustment due to RFF nSCR aggregation | Method used to calculate the adjustment due to RFF nSCR aggregation. One of the following option shall be used:
When the undertaking has no RFF (or have only RFF under Article 304 of Directive 2009/138/EC) it shall select option 4. |
R0460/C0100 | Net future discretionary benefits | Amount of technical provisions without risk margin in relation to future discretionary benefits net of reinsurance. |
[F1Approach to tax rate | ||
R0590/C0109 | Approach based on average tax rate | One of the options in the following closed list shall be used: 1 – Yes 2 – No 3 – Not applicable as the adjustment for the loss-absorbing capacity of deferred taxes (LAC DT) is not used (in this case R0600 to R0690 are not applicable) See EIOPA Guidelines on loss-absorbing capacity of technical provisions and deferred taxes (EIOPA-BoS-14/177 a ) |
Calculation of adjustment for loss-absorbing capacity of deferred taxes (voluntary until 31 December 2019 , compulsory from 1 January 2020 ) | ||
R0600/C0110 | DTA Before the shock | Total amount of the Deferred Tax Assets (DTA) in the balance-sheet using Solvency II valuation before the instantaneous loss described in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35. The DTA amount of this cell shall be consistent with the value in the cell R0040/C0010 in S.02.01. |
R0600/C0120 | DTA After the shock | Total amount/estimate of the Deferred Tax Assets (DTA) if a balance-sheet using Solvency II valuation was set up after the instantaneous loss, as provided for in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35. This cell shall be left blank where R0590/C0109 is filled with ‘ 1-Yes ’ . |
R0610/C0110 | DTA carry forward- Before the shock | Amount of deferred tax assets (DTA) in the balance-sheet using Solvency II valuation due to carry forward of previous loses or tax deductions before the instantaneous loss described in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35 |
R0610/C0120 | DTA carry forward — After the shock | Amount/estimate of deferred tax assets (DTA) due to carry forward of previous loses or tax deductions if a balance-sheet using Solvency II valuation was set up after the instantaneous loss, as provided for in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35. This cell shall be left blank where R0590/C0109 is filled with ‘ 1-Yes ’ . |
R0620/C0110 | DTA due to deductible temporary differences- Before the shock | Amount of deferred tax assets (DTA) in the balance-sheet using Solvency II valuation due to differences between the Solvency II valuation of an asset or liability and its tax base before the instantaneous loss described in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35 |
R0620/C0120 | DTA due to deductible temporary differences — After the shock | Amount/estimate of deferred tax assets (DTA) due to differences between the Solvency II valuation of an asset or liability and its tax base if a balance-sheet using Solvency II valuation was set up after the instantaneous loss, as provided for in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35. This cell shall be left blank where R0590/C0109 is filled with ‘ 1-Yes ’ . |
R0630/C0110 | DTL — Before the shock | Amount of Deferred Tax Liabilities (DTL) in balance-sheet using Solvency II valuation before the instantaneous loss described in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35. The DTL amount of this cell shall be consistent with the value in the cell R0780/C0010 in S.02.01. |
R0630/C0120 | DTL — After the shock | Amount/estimate of Deferred Tax Liabilities (DTL) if a balance-sheet using Solvency II valuation was set up after the instantaneous loss, as provided for in Article 207(1) and (2) of Delegated Regulation (EU) 2015/35. This cell shall be left blank in case of an average tax rate approach and where R0590/C0109 is filled with ‘ 1-Yes ’ . |
R0640/C0130 | Amount/estimate of LAC DT | Amount/estimate of loss-absorbing capacity of deferred taxes, calculated in accordance with Article 207 of Delegated Regulation (EU) 2015/35. The LAC amount of this cell shall be the same as the value in the cell R0310/C0100 in S.25.02.01. |
R0650/C0130 | Amount/estimate of LAC DT justified by reversion of deferred tax liabilities | Amount/estimate of loss-absorbing capacity of deferred taxes, calculated in accordance with Article 207 of Delegated Regulation (EU) 2015/35, justified by reversion of deferred tax liabilities. |
R0660/C0130 | Amount/estimate of LAC DT justified by reference to probable future taxable economic profit | Amount/estimate of loss-absorbing capacity of deferred taxes, calculated in accordance with Article 207 of Delegated Regulation (EU) 2015/35, justified by reference to probable future taxable economic profit. |
R0670/C0130 | Amount/estimate of LAC DT justified by carry back, current year | Amount/estimate of loss-absorbing capacity of deferred taxes, calculated in accordance with Article 207 of Delegated Regulation (EU) 2015/35, justified by profits from past years. Amount of the losses allocated to the next year.. |
R0680/C0130 | Amount/estimate of LAC DT justified by carry back, future years | Amount/estimate of loss-absorbing capacity of deferred taxes, calculated in accordance with Article 207 of Delegated Regulation (EU) 2015/35, justified by profits from past years Amount of losses allocated to the years after next year. |
R0690/C0130 | Amount/estimate of Maximum LAC DT | Maximal amount of loss-absorbing capacity of deferred taxes that could be available, before the assessment whether the increase in net deferred tax assets can be used for the purposes of the adjustment, as provided for in Article 207(2) of Delegated Regulation (EU) 2015/35] |
Textual Amendments
F1 Inserted by Commission Implementing Regulation (EU) 2019/2103 of 27 November 2019 amending and correcting Implementing Regulation (EU) 2015/2450 laying down implementing technical standards with regard to the templates for the submission of information to the supervisory authorities in accordance with Directive 2009/138/EC of the European Parliament and of the Council (Text with EEA relevance).
F2 Deleted by Commission Implementing Regulation (EU) 2017/2189 of 24 November 2017 amending and correcting Implementing Regulation (EU) 2015/2450 laying down implementing technical standards with regard to the templates for the submission of information to the supervisory authorities according to Directive 2009/138/EC of the European Parliament and of the Council (Text with EEA relevance).
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: