Commission Implementing Regulation (EU) 2015/262Show full title

Article 20 Recording of the transponder code in the identification document

1. When a transponder is implanted in accordance with Article 18, the issuing body shall enter the following information in the identification document:

(a) in point 5 of Part A of Section I, at least the last 15 digits of the code transmitted by the transponder and displayed by the reader following implantation; and where appropriate:

(i)

a self-adhesive sticker with a bar-code, provided the page is sealed afterwards; or

(ii)

a print of that bar-code encoding at least those last 15 digits of the code transmitted by the transponder;

(b) in point 12 or 13 of the outline diagram in Part B of Section I, depending on the side where the transponder was implanted, the place where the transponder has been implanted into the equine animal and read after its implantation;

(c) in point 19 of the outline diagram in Part B of Section I, the signature of either the veterinarian or the qualified person who carried out the identification by completing point 3 of Part A and the outline diagram in Part B of Section I and read the code displayed by the transponder after its implantation, or of the person reproducing this information for the purpose of issuing the identification document in accordance with the rules of the issuing body.

2. By way of derogation from paragraph 1(a) of this Article, where an equine animal is marked with a previously implanted transponder which does not comply with the ISO standards referred to in point (n)(i) of Article 2, the name of the manufacturer or the reading system shall be inserted in point 5 of Part A of Section I in the identification document.