- Latest available (Revised)
- Point in Time (14/09/2016)
- Original (As adopted by EU)
Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 14/09/2016.
There are currently no known outstanding effects for the Regulation (EU) 2016/1628 of the European Parliament and of the Council, Article 63.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Article 19 of Regulation (EU) No 167/2013 is amended as follows:
paragraph 3 is replaced by the following:
‘3.The provisions on engine categories, exhaust emission limits, test cycles, emission durability periods, exhaust emission requirements, the monitoring of emissions of in-service engines and the conduct of measurements and tests, as well as the transitional provisions and provisions allowing the early EU type-approval and the placing on the market of Stage V engines laid down for non-road mobile machinery in Regulation (EU) 2016/1628 of the European Parliament and of the Council(1) and the delegated and implementing acts adopted pursuant thereto shall apply.
For the purposes of the placing on the market, registration or entry into service of tractors of categories T2, T4.1 and C2, the engines in the power range 56-130 kW meeting the Stage III B requirements shall be considered to be transition engines as defined in point (32) of Article 3 of Regulation (EU) 2016/1628.’;
in paragraph 6, the following subparagraph is added:
‘By way of derogation from the principle set out in the second subparagraph, the Commission shall be empowered to amend, by 31 December 2016, Commission Delegated Regulation (EU) 2015/96(2), so that:
for the purposes of EU type-approval for tractors of categories T2, T4.1 and C2, the period of postponement set out in Article 11(4) of Delegated Regulation (EU) 2015/96 is four years; and
under the flexibility scheme referred to in Article 14 of Delegated Regulation (EU) 2015/96, the flexibility allowed pursuant to point 1.1.1 of Annex V to that Delegated Regulation is increased to 150 % for tractors of categories T2, T4.1 and C2.’.
Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC (OJ L 252, 16.9.2016, p. 53)’;
Commission Delegated Regulation (EU) 2015/96 of 1 October 2014 supplementing Regulation (EU) No 167/2013 of the European Parliament and of the Council as regards environmental and propulsion unit performance requirements of agricultural and forestry vehicles (OJ L 16, 23.1.2015, p. 1).’.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: