1.Manufacturers shall submit a separate application for each engine type or engine family EU type-approval to the approval authority of a Member State, and each application shall be accompanied by the information folder referred to in Article 21. Only one application shall be submitted in respect of a particular engine type or, where applicable, engine family, and it shall be submitted to only one approval authority.
2.Manufacturers shall make available to the technical service responsible for conducting the EU type-approval tests an engine conforming to the engine type or, in the case of an engine family, to the parent engine characteristics described in the information folder referred to in Article 21.
3.In the case of an application for EU type-approval of an engine family, if the approval authority determines that, with regard to the selected parent engine referred to in paragraph 2 of this Article, the application submitted does not fully represent the engine family described in the information folder referred to in Article 21, manufacturers shall make available an alternative and, if necessary, an additional parent engine which is considered by the approval authority to represent the engine family.
4.Within one month of the start of production of the approved engine type or engine family, manufacturers shall submit the initial plan for monitoring in-service engines to the approval authority that granted EU type-approval for that engine type or, where applicable, engine family.
1.The applicant shall provide the approval authority with an information folder which includes the following:
(a)an information document, including a list of reference fuels and, where requested by the manufacturer, any other specified fuels, fuel mixtures or fuel emulsions referred to in Article 25(2) and described in accordance with the delegated acts referred to in Article 25(4) (‘the information document’);
(b)all relevant data, drawings, photographs and other information relating to the engine type or, where applicable, the parent engine;
(c)any additional information requested by the approval authority in the context of the EU type-approval application procedure.
2.The information folder may be provided in paper form or in an electronic format that is accepted by the technical service and the approval authority.
3.The Commission may adopt implementing acts laying down templates for the information document and for the information folder. Those implementing acts shall be adopted, by 31 December 2016, in accordance with the examination procedure referred to in Article 56(2).