Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.
1.The manufacturer shall inform the approval authority that granted the EU type-approval of any change in the particulars recorded in the information package, without delay.
In the event of such a change, that approval authority shall decide which of the procedures laid down in Article 28 is to be followed.
Where necessary, the approval authority may decide, after consulting the manufacturer, that a new EU type-approval is to be granted.
2.An application for the amendment of an EU type-approval shall be submitted only to the approval authority that granted the original EU type-approval.
3.If the approval authority finds that, for the purposes of making an amendment, inspections or tests need to be repeated, it shall inform the manufacturer accordingly.
The procedures laid down in Article 28 shall apply only if, on the basis of those inspections or tests, the approval authority concludes that the requirements for EU type-approval continue to be fulfilled.
1.Where particulars recorded in the information package have been changed, without requiring inspections or tests to be repeated, such an amendment shall be termed a ‘revision’.
In the event of such a revision, the approval authority shall, without unjustified delay, revise the relevant pages of the information package as necessary, marking each of them to clearly show the nature of the amendment, and it shall also state the date of revision and include a revised index to the information package. A consolidated, updated version of the information package, accompanied by a detailed description of the amendments, shall be deemed to fulfil the requirement of this paragraph.
2.An amendment as referred to in paragraph 1 shall be termed an ‘extension’ where the particulars recorded in the information package have been changed and any of the following occurs:
(a)further inspections or tests are required;
(b)any information included in the EU type-approval certificate, with the exception of its attachments, has changed;
(c)a new requirement set out in this Regulation or in a delegated or implementing act adopted pursuant to this Regulation becomes applicable to the approved engine type or engine family.
In the event of an extension, the approval authority shall establish an updated EU type-approval certificate denoted by an extension number that shall be incremented in accordance with the number of successive extensions previously granted. That EU type-approval certificate shall clearly show the reason for the extension and the date of extension.
3.Whenever pages of the information package are amended or a consolidated, updated version is established, the index to the information package attached to the EU type-approval certificate shall be amended accordingly to indicate the date of the most recent extension or revision, or the date of the most recent consolidation of the updated version.
4.No amendment to the EU type-approval of an engine type or engine family shall be required if a new requirement referred to in point (c) of paragraph 2 is, from a technical point of view, irrelevant to that engine type or engine family with regard to its emission performance.
1.In the event of a revision of an EU type-approval, the approval authority shall issue to the applicant, without unjustified delay, the revised documents or the consolidated, updated version, as appropriate, including the revised index to the information package, as referred to in the second subparagraph of Article 28(1).
2.In the event of an extension of an EU type-approval, the approval authority shall issue to the applicant, without unjustified delay, the updated EU type-approval certificate referred to in the second subparagraph of Article 28(2), including the attachments thereto, and the index to the information package.
3.The approval authority shall, by means of IMI, notify the approval authorities of the other Member States of any amendment made to EU type-approvals, in accordance with Article 22(5).
1.EU type-approvals shall be issued for an unlimited duration.
2.An EU type-approval of an engine shall become invalid in any of the following cases:
(a)where new requirements applicable to the approved engine type or, where applicable, to the engine family become mandatory for its placing on the market and it is not possible to extend or revise the EU type-approval accordingly;
(b)where production of the approved engine type or engine family is definitively and voluntarily discontinued;
(c)where the validity of the EU type-approval expires by virtue of a restriction, in accordance with Article 35(3);
(d)where the EU type-approval has been withdrawn in accordance with Articles 26(5), 39(1) or 40(3).
3.Where the conditions for the validity of an EU type-approval are no longer satisfied in respect of only one engine type within an engine family, the EU type-approval of the engine family in question shall become invalid only in so far as that particular engine type is concerned.
4.Where the production of an engine type or, where applicable, an engine family is definitively discontinued, the manufacturer shall notify the approval authority that granted the corresponding EU type-approval of that discontinuation.
Within one month of receiving that notification, the approval authority that granted the EU type-approval for the engine type or engine family shall inform the approval authorities of the other Member States accordingly.
5.Without prejudice to paragraph 4, where an EU type-approval of an engine type or, where applicable, of an engine family is to become invalid, the manufacturer shall notify the approval authority that granted the corresponding EU type-approval of that fact.
In such cases, the approval authority that granted the EU type-approval shall without delay communicate all relevant information to the approval authorities of the other Member States.
That communication shall specify, in particular, the date of production and the engine identification number of the last engine produced.
6.The notification requirements referred to in paragraphs 4 and 5 shall be deemed to have been fulfilled where the relevant information has been uploaded onto IMI.