- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2016/1868 of 20 October 2016 amending and correcting Implementing Regulation (EU) 2015/2450 laying down implementing technical standards with regard to the templates for the submission of information to the supervisory authorities according to Directive 2009/138/EC of the European Parliament and of the Council (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are outstanding changes not yet made to Commission Implementing Regulation (EU) 2016/1868. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Annex II to Implementing Regulation (EU) 2015/2450 is amended as follows:
In S.06.02 — List of assets, the instructions of C0300 is replaced by the following:
‘C0300 | Infrastructure investment | Identify if the asset is an infrastructure investment as defined in article 1 (55a) and (55b) of Commission Delegated Regulation (EU) 2015/35. One of the options in the following closed list shall be used:
|
In S.21.02.C0080 the instructions are replaced by the following: ‘Identify the ISO 4217 alphabetic code of the original currency.’.
In S.26.01 — Solvency Capital Requirement — Market risk:
The following rows are added under Equity risk, under row R0260-R0280/C0040:
‘R0290/C0020 | Initial absolute values before shock — Assets — Equity risk — qualifying infrastructure equities | This is the initial absolute value of the assets sensitive to the equity risk for qualifying infrastructure equities. Recoverables from reinsurance and SPVs shall not be included in this cell. |
R0290/C0030 | Initial absolute values before shock — Liabilities — Equity risk — qualifying infrastructure equities | This is the initial absolute value of liabilities sensitive to the equity risk for qualifying infrastructure equities. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0290/C0040 | Absolute values after shock — Assets — Equity risk — qualifying infrastructure equities | This is the absolute value of the assets sensitive to equity risk for qualifying infrastructure equities, after the shock. Recoverables from reinsurance and SPVs shall not be included in this cell. |
R0290/C0050 | Absolute values after shock — Liabilities (after the loss absorbing capacity of technical provisions) — Equity risk — qualifying infrastructure equities | This is the absolute value of liabilities sensitive to equity risk (for qualifying infrastructure equities), after the shock and after the loss absorbing capacity of technical provisions. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0290/C0060 | Absolute value after shock — Net solvency capital requirement — Equity risk — qualifying infrastructure equities | This is the net capital charge for equity risk (for qualifying infrastructure equities) after adjustment for the loss absorbing capacity of technical provisions. |
R0290/C0070 | Absolute values after shock — Liabilities (before the loss absorbing capacity of technical provisions) — Equity risk — qualifying infrastructure equities | This is the absolute value of the liabilities sensitive to equity risk (for qualifying infrastructure equities), after the shock but before the loss absorbing capacity of technical provisions. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0290/C0080 | Absolute value after shock — Gross solvency capital requirement — Equity risk — qualifying infrastructure equities | This is the gross capital charge for equity risk for qualifying infrastructure equities, i.e. before the loss absorbing capacity of technical provisions.’ |
The following rows are added under Spread risk, in between row R0410/C0080 and R0420/C0060:
‘R0411/C0020 | Initial absolute values before shock — Assets — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the initial absolute value of the assets sensitive to the spread risk on bonds and loans that are qualifying infrastructure investments. Recoverables from reinsurance and SPVs shall not be included in this cell. |
R0411/C0030 | Initial absolute values before shock — Liabilities — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the initial absolute value of the liabilities sensitive to the spread risk on bonds and loans that are qualifying infrastructure investments. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0411/C0040 | Absolute values after shock — Assets — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the absolute value of the assets sensitive to the spread risk on bonds and loans that are qualifying infrastructure investments, after the shock. Recoverables from reinsurance and SPVs shall not be included in this cell. |
R0411/C0050 | Absolute values after shock — Liabilities (after the loss absorbing capacity of technical provisions) — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the absolute value of the liabilities sensitive to the spread risk on bonds and loans that are qualifying infrastructure investments, after the shock and after the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0411/C0060 | Absolute value after shock — Net solvency capital requirement — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the net capital charge for spread risk on bonds and loans that are qualifying infrastructure investments, after adjustment for the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. If R0010/C0010 = 1, this item shall not be reported. |
R0411/C0070 | Absolute values after shock — Liabilities (before the loss absorbing capacity of technical provisions) — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the absolute value of the liabilities sensitive to the spread risk on bonds and loans that are qualifying infrastructure investments, after the shock but before the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0411/C0080 | Absolute value after shock — Gross solvency capital requirement — Spread risk — bonds and loans (qualifying infrastructure investments) | This is the gross capital charge for spread risk on bonds and loans that are qualifying infrastructure investments, i.e. before the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. If R0010/C0010 = 1, this item shall not be reported. |
R0412/C0020 | Initial absolute values before shock — Assets — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the initial absolute value of the assets sensitive to the spread risk on bonds and loans other than qualifying infrastructure investments. Recoverables from reinsurance and SPVs shall not be included in this cell. |
R0412/C0030 | Initial absolute values before shock — Liabilities — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the initial absolute value of the liabilities sensitive to the spread risk on bonds and loans other than qualifying infrastructure investments. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0412/C0040 | Absolute values after shock — Assets — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the absolute value of the assets sensitive to the spread risk on bonds and loans other than qualifying infrastructure investments, after the shock. Recoverables from reinsurance and SPVs shall not be included in this cell. |
R0412/C0050 | Absolute values after shock — Liabilities (after the loss absorbing capacity of technical provisions) — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the absolute value of the liabilities sensitive to the spread risk on bonds and loans other than qualifying infrastructure investments, after the shock and after the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0412/C0060 | Absolute value after shock — Net solvency capital requirement — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the net capital charge for spread risk on bonds and loans other than qualifying infrastructure investments, after adjustment for the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. If R0010/C0010 = 1, this item shall not be reported. |
R0412/C0070 | Absolute values after shock — Liabilities (before the loss absorbing capacity of technical provisions) — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the absolute value of the liabilities sensitive to the spread risk on bonds and loans other than qualifying infrastructure investments, after the shock but before the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. The amount of TP shall be net of reinsurance and SPV recoverables. |
R0412/C0080 | Absolute value after shock — Gross solvency capital requirement — Spread risk — bonds and loans (other than qualifying infrastructure investments) | This is the gross capital charge for spread risk on bonds and loans other than qualifying infrastructure investments, i.e. before the loss absorbing capacity of technical provisions. This value shall be reported only where the split between R0411 and R0412 could be derived from the method used for the calculation. When the split is not possible only R0410 shall be filled in. If R0010/C0010 = 1, this item shall not be reported.’ |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: