7.Operability
7.1.Safety
7.1.1.All technical provisions and measures shall be taken to ensure that the cableway installation is used for its intended purpose according to its technical specification and to the specified operating conditions and that the instructions on safe operation and maintenance can be complied with. The instruction manual and the corresponding notes shall be drawn up in a language which can be easily understood by users, as determined by the Member State in the territory of which the cableway installation is constructed.
7.1.2.The persons responsible for operating the cableway installation shall be provided with the appropriate material resources and shall be qualified to carry out the task in hand.
7.2.Safety in the event of immobilisation of the cableway installation
All technical provisions and measures shall be adopted to ensure that passengers and operating personnel can be brought to safety within a set time appropriate to the type of cableway installation and its surroundings when the cableway installation is immobilised and cannot be restarted quickly.
7.3.Other special provisions concerning safety
7.3.1.Operators' stands and workplaces
Movable parts which are normally accessible in the stations shall be designed, constructed and installed in such a way as to preclude any risks or, where such risks exist, be fitted with protective devices so as to prevent any contact with parts of the cableway installation which may cause accidents. Those devices shall be of a type that cannot easily be removed or rendered inoperative.
7.3.2.Risk of falling
Workplaces and working areas, including those used only occasionally, and the access to them, shall be designed and constructed in such a way as to prevent persons required to work or move in them from falling. Should the construction not be adequate, they shall also be provided with anchorage points for personal protective equipment to prevent falls.