Regulation (EU) 2016/424 of the European Parliament and of the CouncilShow full title

Regulation (EU) 2016/424 of the European Parliament and of the Council

of 9 March 2016

on cableway installations and repealing Directive 2000/9/EC

(Text with EEA relevance)

THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof,

Having regard to the proposal from the European Commission,

After transmission of the draft legislative act to the national parliaments,

Having regard to the opinion of the European Economic and Social Committee(1),

Acting in accordance with the ordinary legislative procedure(2),

Whereas:

(1) Directive 2000/9/EC of the European Parliament and of the Council(3) lays down rules for cableway installations that are designed, constructed and operated with a view to transporting persons.

(2) Directive 2000/9/EC is based on the ‘new approach’ principles, as set out in the Council Resolution of 7 May 1985 on a new approach to technical harmonisation and standards(4). Thus, it sets out only the essential requirements applying to cableway installations, whereas technical details are adopted by the European Committee for Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council(5). Conformity with the harmonised standards so set, the reference numbers of which are published in the Official Journal of the European Union, provides a presumption of conformity with the requirements of Directive 2000/9/EC. Experience has shown that those basic principles have worked well in that sector and should be maintained and even further promoted.

(3) Experience acquired from the implementation of Directive 2000/9/EC has shown the need to modify some of its provisions in order to clarify and update them and thus ensure legal certainty, mainly as regards the scope and the conformity assessment of subsystems.

(4) Since the scope, essential requirements and conformity assessment procedures have to be identical in all Member States, there is almost no flexibility in transposing a directive based on the new approach principles into national law. In order to simplify the regulatory framework, Directive 2000/9/EC should be replaced by a regulation, which is the appropriate legal instrument as it imposes clear and detailed rules which do not give room for divergent transposition by Member States and thus ensures a uniform implementation throughout the Union.

(5) Decision No 768/2008/EC of the European Parliament and of the Council(6) lays down common principles and reference provisions intended to apply across the legislation harmonising the conditions for the marketing of products in order to provide a coherent basis for revision or recasts of that legislation. Directive 2000/9/EC should therefore be adapted to that Decision.

(6) Regulation (EC) No 765/2008 of the European Parliament and of the Council(7) lays down rules on the accreditation of conformity assessment bodies, provides a framework for the market surveillance of products and for controls on products from third countries, and lays down the general principles of the CE marking.

(7) The scope of this Regulation should reflect the scope of Directive 2000/9/EC. This Regulation should apply to cableway installations designed to transport persons used in particular in high-altitude tourist resorts, in urban transport facilities or in sports facilities. Cableway installations are mainly lift systems, such as funicular railways, aerial ropeways (cable cars, gondolas, chairlifts) and drag lifts. Traction by cable and the passenger transport function are the essential criteria in determining whether a cableway installation is covered by this Regulation.

(8) This Regulation should apply in its entirety to new cableway installations, to modifications of cableway installations requiring a new authorisation and covers subsystems and safety components which are new to the Union market when they are placed on it; that is to say, they are either new subsystems and safety components made by a manufacturer established in the Union or subsystems and safety components, whether new or second-hand, imported from a third country. This Regulation does not apply to the relocation of cableway installations installed on the territory of the Union or to the relocation of subsystems or safety components that were incorporated into such installations, except where such relocation implies a major modification of the cableway installation.

(9) New types of cableway installations have been developed that are intended for both transport and leisure activities. Such installations should be covered by this Regulation.

(10) It is appropriate to exclude certain cableway installations from the scope of this Regulation, either because they are subject to other specific Union harmonisation legislation or because they can be adequately regulated at national level.

(11) Lifts, including cable-operated lifts, whether vertical or inclined, permanently serving specific levels of buildings and constructions and not operating between cableway stations, are subject to specific Union legislation and should be excluded from the scope of this Regulation. Cableway installations covered by this Regulation are excluded from the scope of Directive 2014/33/EU of the European Parliament and of the Council(8).

(12) Cableway installations that are categorised by Member States as historic, cultural or heritage installations, that entered into service before 1 January 1986 and are still in operation, and that have not had any significant changes in design or construction, should be excluded from the scope of this Regulation. This exclusion also applies to subsystems and safety components specifically designed for such cableway installations. Member States should ensure a high level of protection of the health and safety of persons and of property concerning such cableway installations, if necessary by way of national legislation.

(13) In order to ensure legal certainty, the exclusion of cable-operated ferries should cover all cable-operated installations where the users or carriers are waterborne, such as cable-operated waterski installations.

(14) In order to ensure that cableway installations and their infrastructure, subsystems and safety components guarantee a high level of protection of the health and safety of persons and of property, it is necessary to lay down rules for the design and the construction of cableway installations.

(15) Member States should ensure the safety of cableway installations at the time of their construction, entry into service and during their operation.

(16) This Regulation should not affect the right of the Member States to specify the requirements they deem necessary as regards land use and regional planning, and in order to ensure the protection of the environment and of the health and safety of persons, and in particular workers and operating personnel, when using cableway installations.

(17) This Regulation should not affect the right of the Member States to specify adequate procedures for the authorisation of planned cableway installations, the inspection of cableway installations prior to their entry into service and their monitoring during operation.

(18) This Regulation should take into account the fact that the safety of cableway installations depends equally on the surrounding conditions, on the quality of the industrial goods supplied and on the way in which they are assembled, installed on-site and monitored during operation. The causes of serious accidents may be linked to the choice of site, to the system of transport itself, to the structures, or to the way in which the system is operated and maintained.

(19) Although this Regulation does not cover the actual operation of cableway installations, it should provide a general framework intended to ensure that such installations situated on the territory of Member States are operated in such a way as to offer passengers, operating personnel and third parties a high degree of protection.

(20) Member States should take the necessary steps to ensure that cableway installations enter into service only if they comply with this Regulation and are not liable to endanger the health or safety of persons or property when properly installed, maintained and operated in accordance with their intended purpose.

(21) Member States should lay down procedures for authorising the construction of planned cableway installations and the modification of such installations and for their entry into service in order to ensure that the cableway installation is safely constructed and assembled on-site, in accordance with the safety analysis, the results of which are included in the safety report, and all relevant regulatory requirements.

(22) The safety analysis for planned cableway installations should identify the components on which the safety of the cableway installation depends.

(23) The safety analysis for planned cableway installations should take into account the constraints linked to the operation of cableway installations, albeit not in such a way as to jeopardise the principle of free movement of goods for subsystems and safety components or the safety of the cableway installations themselves.

(24) Rules on authorising the entry into service of cableway installations fall within the competence of Member States. Authorisation for entry into service is granted by the competent authorities or bodies. Monitoring of the operating safety of cableway installations also falls within the competence of Member States. Member States should therefore determine the person responsible for the cableway installation and, accordingly, for the safety analysis of a planned cableway installation.

(25) This Regulation aims to ensure the functioning of the internal market for subsystems of cableway installations and for safety components for cableway installations. Subsystems and safety components complying with this Regulation should benefit from the principle of free movement of goods.

(26) Subsystems and safety components should be allowed to be incorporated in a cableway installation provided that they permit the construction of cableway installations which comply with this Regulation and are not liable to endanger the health or safety of persons or property when properly installed, maintained and operated in accordance with their intended purpose.

(27) The essential requirements should be interpreted and applied so as to take account of the state of the art at the time of design and manufacture as well as of technical and economic considerations which are consistent with a high degree of health and safety protection.

(28) Economic operators should be responsible for the compliance of subsystems and safety components with the requirements of this Regulation, in relation to their respective roles in the supply chain, so as to ensure a high level of protection of public interests, such as the health and safety of persons and protection of property, and to guarantee fair competition on the Union market.

(29) All economic operators intervening in the supply and distribution chain should take appropriate measures to ensure that they only make available on the market subsystems and safety components which are in conformity with this Regulation. It is necessary to provide for a clear and proportionate distribution of obligations which correspond to the role of each economic operator in the supply and distribution chain.

(30) The manufacturer of subsystems or safety components, having detailed knowledge of the design and production process, is best placed to carry out the conformity assessment procedure. Conformity assessment should therefore remain solely the obligation of the manufacturer of the subsystem or the safety component.

(31) In order to facilitate communication between economic operators and national market surveillance authorities, Member States should encourage economic operators to include a website address in addition to the postal address.

(32) It is necessary to ensure that subsystems and safety components from third countries entering the Union market comply with the requirements of this Regulation, and in particular that appropriate conformity assessment procedures have been carried out by manufacturers with regard to those subsystems and safety components. Provision should therefore be made for importers to make sure that the subsystems or safety components they place on the market comply with the requirements of this Regulation and that they do not place on the market subsystems and safety components which do not comply with such requirements or present a risk. Provision should also be made for importers to make sure that conformity assessment procedures have been carried out and that subsystem and safety component marking and documentation drawn up by manufacturers are available for inspection by the competent national authorities.

(33) The distributor makes a subsystem or a safety component available on the market after it has been placed on the market by the manufacturer or the importer and should act with due care to ensure that its handling of the subsystem or the safety component does not adversely affect its compliance.

(34) When placing on the market a subsystem or a safety component, every importer should indicate on the subsystem or safety component his name, registered trade name or registered trade mark and the postal address at which he can be contacted, as well as a website, where available. Exceptions should be provided for in cases where the size or nature of the subsystem or safety component does not allow it. This includes cases where the importer would have to open the packaging to put his name and address on the subsystem or safety component.

(35) Any economic operator that either places a subsystem or a safety component on the market under his own name or trademark, or modifies a subsystem or a safety component in such a way that compliance with the requirements of this Regulation may be affected, should be considered to be the manufacturer and should assume the obligations of the manufacturer.

(36) Distributors and importers, being close to the market place, should be involved in market surveillance tasks carried out by the competent national authorities, and should be prepared to participate actively, providing those authorities with all necessary information relating to the subsystems or the safety components concerned.

(37) Ensuring traceability of a subsystem or a safety component throughout the whole supply chain helps to make market surveillance simpler and more efficient. An efficient traceability system facilitates the market surveillance authorities' task of tracing economic operators who made non-compliant subsystems or safety components available on the market. When keeping the information required under this Regulation for the identification of other economic operators, economic operators should not be required to update such information in respect of other economic operators who have either supplied them with a subsystem or safety component or to whom they have supplied a subsystem or a safety component.

(38) This Regulation should be limited to the expression of the essential requirements. In order to facilitate conformity assessment with those requirements it is necessary to provide for presumption of conformity for cableway installations, subsystems and safety components which are in conformity with harmonised standards that are adopted in accordance with Regulation (EU) No 1025/2012 for the purpose of expressing detailed technical specifications of those requirements, especially with regard to the design, construction and operation of cableway installations.

(39) Regulation (EU) No 1025/2012 provides for a procedure for objections to harmonised standards where those standards do not entirely satisfy the requirements of this Regulation.

(40) In order to enable economic operators to demonstrate and the competent authorities to ensure that subsystems and safety components made available on the market conform to the essential requirements, it is necessary to provide for conformity assessment procedures. Decision No 768/2008/EC establishes modules for conformity assessment procedures, which include procedures from the least to the most stringent, in proportion to the level of risk involved and the level of safety required. In order to ensure inter-sectoral coherence and to avoid ad hoc variants, conformity assessment procedures should be chosen from among those modules.

(41) Manufacturers of subsystems and safety components should draw up an EU declaration of conformity to provide information required under this Regulation on the conformity of a subsystem or a safety component with the requirements of this Regulation and of other relevant Union harmonisation legislation. The EU declaration of conformity should accompany the subsystem or safety component.

(42) To ensure effective access to information for market surveillance purposes, the information required to identify all applicable Union acts for a subsystem or a safety component should be available in a single EU declaration of conformity. In order to reduce the administrative burden on economic operators, that single EU declaration of conformity may be a dossier made up of the relevant individual declarations of conformity.

(43) The CE marking, indicating the conformity of a subsystem or a safety component, is the visible consequence of a whole process comprising conformity assessment in a broad sense. General principles governing the CE marking and its relationship with other markings are set out in Regulation (EC) No 765/2008. Rules governing the affixing of the CE marking should be laid down in this Regulation.

(44) A check on compliance of subsystems and safety components with the essential requirements provided for in this Regulation is necessary in order to provide effective protection for passengers, operating personnel and third parties.

(45) The conformity assessment procedures set out in this Regulation require the intervention of conformity assessment bodies, which are notified by the Member States to the Commission.

(46) Experience has shown that the criteria, set out in Directive 2000/9/EC, that conformity assessment bodies have to fulfil in order to be notified to the Commission are not sufficient to ensure a uniformly high level of performance of notified bodies throughout the Union. It is, however, essential that all notified bodies perform their functions to the same level and under conditions of fair competition. That requires the setting of obligatory requirements for conformity assessment bodies wishing to be notified in order to provide conformity assessment services.

(47) In order to ensure a consistent level of conformity assessment quality, it is also necessary to set requirements for notifying authorities and other bodies involved in the assessment, notification and monitoring of notified bodies.

(48) If a conformity assessment body demonstrates conformity with the criteria laid down in harmonised standards, it should be presumed to comply with the corresponding requirements set out in this Regulation.

(49) The system set out in this Regulation should be complemented by the accreditation system provided for in Regulation (EC) No 765/2008. Since accreditation is an essential means of verifying the competence of conformity assessment bodies, it should also be used for the purposes of notification.

(50) Transparent accreditation as provided for in Regulation (EC) No 765/2008, ensuring the necessary level of confidence in certificates of conformity, should be considered by the national public authorities throughout the Union as the preferred means of demonstrating the technical competence of conformity assessment bodies. However, national authorities may consider that they possess the appropriate means of carrying out that evaluation themselves. In such cases, in order to ensure the appropriate level of credibility of evaluations carried out by other national authorities, they should provide the Commission and the other Member States with the necessary documentary evidence demonstrating the compliance of the conformity assessment bodies evaluated with the relevant regulatory requirements.

(51) Conformity assessment bodies frequently subcontract parts of their activities linked to the assessment of conformity or have recourse to a subsidiary. In order to safeguard the level of protection required for the subsystems and safety components to be placed on the Union market, it is essential that conformity assessment subcontractors and subsidiaries fulfil the same requirements as notified bodies in relation to the performance of conformity assessment tasks. Therefore, it is important that the assessment of the competence and the performance of bodies to be notified and the monitoring of bodies already notified cover also activities carried out by subcontractors and subsidiaries.

(52) It is necessary to increase the efficiency and transparency of the notification procedure and, in particular, to adapt it to new technologies so as to enable online notification.

(53) Since notified bodies may offer their services throughout the Union, it is appropriate to give the other Member States and the Commission the opportunity to raise objections concerning a notified body. It is therefore important to provide for a period during which any doubts or concerns as to the competence of conformity assessment bodies can be clarified before they start operating as notified bodies.

(54) In the interests of competitiveness, it is crucial that notified bodies apply the conformity assessment procedures without creating unnecessary burdens for economic operators. For the same reason, and to ensure equal treatment of economic operators, consistency in the technical application of the conformity assessment procedures needs to be ensured. That can best be achieved through appropriate coordination and cooperation between notified bodies.

(55) Interested parties should have the right to appeal against the result of a conformity assessment carried out by a notified body. For that reason, it is important to ensure that an appeal procedure against decisions taken by notified bodies is available.

(56) In order to ensure legal certainty, it is necessary to clarify that rules on Union market surveillance and control of products entering the Union market provided for in Regulation (EC) No 765/2008 apply to subsystems and safety components covered by this Regulation. This Regulation should not prevent Member States from choosing the competent authorities to carry out those tasks.

(57) Directive 2000/9/EC already provides for a safeguard procedure which is necessary to allow for the possibility of contesting the conformity of a subsystem or safety component. In order to increase transparency and to reduce processing time, it is necessary to improve the existing safeguard procedure, with a view to making it more efficient and drawing on the expertise available in Member States.

(58) The existing system should be supplemented by a procedure under which interested parties are informed of measures intended to be taken with regard to subsystems and safety components presenting a risk to the health or safety of persons or to property. It should also allow market surveillance authorities, in cooperation with the relevant economic operators, to act at an earlier stage in respect of such subsystems and safety components.

(59) Where the Member States and the Commission agree as to the justification of a measure taken by a Member State, no further involvement of the Commission should be required, except where non-compliance can be attributed to shortcomings of a harmonised standard.

(60) In order to ensure uniform conditions for the implementation of this Regulation, implementing powers should be conferred on the Commission. Those powers should be exercised in accordance with Regulation (EU) No 182/2011 of the European Parliament and of the Council(9).

(61) The advisory procedure should be used for the adoption of implementing acts requesting the notifying Member State to take the necessary corrective measures in respect of notified bodies that do not meet or no longer meet the requirements for their notification.

(62) The examination procedure should be used for the adoption of implementing acts with respect to compliant subsystems and safety components which present a risk to the health or safety of persons or to property.

(63) The Commission should adopt immediately applicable implementing acts where, in duly justified cases relating to compliant subsystems or safety components which present a risk to the health or safety of persons, imperative grounds of urgency so require.

(64) In line with established practice, the committee set up by this Regulation can play a useful role in examining matters concerning the application of this Regulation raised either by its chair or by a representative of a Member State in accordance with its rules of procedure.

(65) When matters relating to this Regulation, other than its implementation or infringements, are being examined, i.e. in a Commission expert group, the European Parliament should in line with existing practice receive full information and documentation and, where appropriate, an invitation to attend such meetings.

(66) The Commission should, by means of implementing acts and, given their special nature, acting without the application of Regulation (EU) No 182/2011, determine whether measures taken by Member States in respect of non-compliant subsystems or safety components are justified or not.

(67) It is necessary to provide for reasonable transitional arrangements that allow the making available on the market, without the need to comply with further product requirements, of subsystems and safety components that have already been placed on the market in accordance with Directive 2000/9/EC.

(68) It is necessary to provide for transitional arrangements that allow the entry into service of cableway installations that have already been installed in accordance with Directive 2000/9/EC.

(69) Member States should lay down rules on penalties applicable to infringements of this Regulation and of national law adopted pursuant to this Regulation and ensure that those rules are enforced. The penalties provided for should be effective, proportionate and dissuasive. The penalties should have regard to the seriousness, the duration and, where applicable, the intentional character of the infringement. In addition, the penalties should have regard to whether the relevant economic operator has previously committed a similar infringement of this Regulation.

(70) Since the objective of this Regulation, namely to ensure that cableway installations fulfil the requirements providing for a high level of protection of health and safety of persons and of property while guaranteeing the functioning of the internal market for subsystems and safety components, cannot be sufficiently achieved by the Member States but can rather, by reason of its scale and effects, be better achieved at Union level, the Union may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty on European Union. In accordance with the principle of proportionality, as set out in that Article, this Regulation does not go beyond what is necessary in order to achieve that objective.

(71) Directive 2000/9/EC should therefore be repealed,

HAVE ADOPTED THIS REGULATION:

CHAPTER I U.K. GENERAL PROVISIONS

Article 1 U.K. Subject matter

This Regulation lays down rules on the making available on the market and the free movement of subsystems and safety components for cableway installations. It also contains rules on the design, construction and entry into service of new cableway installations.

Article 2 U.K. Scope

1. This Regulation applies to new cableway installations designed to transport persons, to modifications of cableway installations requiring a new authorisation, and to subsystems and safety components for cableway installations.

2. This Regulation does not apply to the following:

(a) lifts covered by [F1 the Lifts Regulations 2016];

(b) cableway installations that are categorised [F2 by the Cableway Installations Regulations 2018] as historic, cultural or heritage installations, that entered into service before 1 January 1986 and that are still in operation, and that have not had any significant changes in design or construction, including subsystems and safety components specifically designed for them;

(c) installations intended for agricultural or forestry purposes;

(d) cableway installations for the service of mountain shelters and huts intended only for the transport of goods and specifically designated persons;

(e) on-site or mobile equipment exclusively designed for leisure and amusement purposes and not as a means for transporting persons;

(f) mining installations or other industrial on-site installations used for industrial activities;

(g) installations in which the users or their carriers are waterborne.

Textual Amendments

F1 Words in Art. 2(2)(a) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 13(a); 2020 c. 1, Sch. 5 para. 1(1)

F2 Words in Art. 2(2)(b) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 13(b); 2020 c. 1, Sch. 5 para. 1(1)

Article 3 U.K. Definitions

For the purposes of this Regulation the following definitions apply:

(1)

‘cableway installation’ means a whole on-site system, consisting of infrastructure and subsystems, which is designed, constructed, assembled and put into service with the objective of transporting persons, where the traction is provided by cables positioned along the line of travel;

(2)

‘subsystem’ means a system listed in Annex I, or a combination thereof, intended to be incorporated into a cableway installation;

(3)

‘infrastructure’ means a station structure or a structure along the line specifically designed for each cableway installation and constructed on-site, which takes into account the layout and the data of the system and which is needed for the construction and the operation of the cableway installation, including the foundations;

(4)

‘safety component’ means any component of equipment or any device intended to be incorporated into a subsystem or a cableway installation for the purpose of ensuring a safety function, the failure of which endangers the safety or health of passengers, operating personnel or third parties;

(5)

‘operability’ means all the technical provisions and measures which have an impact on design and construction and are necessary in order for the cableway installation to operate safely;

(6)

‘maintainability’ means all the technical provisions and measures which have an impact on design and construction and are necessary for maintenance, having been designed to ensure that the cableway installation operates safely;

(7)

‘cable car’ means a cableway installation where the carriers are suspended from and propelled by one or more cables;

(8)

‘drag lift’ means a cableway installation where passengers with appropriate equipment are towed along a prepared track;

(9)

‘funicular railway’ means a cableway installation in which the carriers are hauled by one or more ropes along a track that may lie on the ground or be supported by fixed structures;

(10)

‘making available on the market’ means any supply of a subsystem or a safety component for distribution or use on the F3 ... market in the course of a commercial activity, whether in return for payment or free of charge;

(11)

‘placing on the market’ means the first making available of a subsystem or a safety component on the F4 ... market;

(12)

‘entry into service’ means the initial operation of a cableway installation with the explicit object of transporting persons;

(13)

‘manufacturer’ means any natural or legal person who manufactures a subsystem or a safety component or who has such a subsystem or a safety component designed or manufactured, and markets that subsystem or safety component under his name or trade mark or incorporates it into a cableway installation;

(14)

‘authorised representative’ means any natural or legal person F5 ... who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks;

(15)

‘importer’ means any natural or legal person [F6 established within the United Kingdom] who places a subsystem or a safety component from a third country on the [F7 market];

(16)

‘distributor’ means any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a subsystem or a safety component available on the market;

(17)

‘economic operators’ means the manufacturer, the authorised representative, the importer and the distributor of a subsystem or a safety component;

(18)

‘technical specification’ means a document that prescribes technical requirements to be fulfilled by a cableway installation, infrastructure, subsystem or safety component;

(19)

F8 ...

(20)

‘accreditation’ means accreditation as defined in point 10 of Article 2 of Regulation (EC) No 765/2008;

(21)

F9 ...

(22)

‘conformity assessment’ means the process demonstrating whether the essential requirements of this Regulation relating to a subsystem or safety component have been fulfilled;

(23)

‘conformity assessment body’ means a body that performs conformity assessment activities relating to a subsystem or safety component, including calibration, testing, certification and inspection;

(24)

‘recall’ means any measure aimed at achieving the return of a subsystem or a safety component that has already been made available to the person responsible for the cableway installation;

(25)

‘withdrawal’ means any measure aimed at preventing a subsystem or a safety component in the supply chain from being made available on the market;

(26)

F10 ...

(27)

F11 ...

(28)

[F12 ‘the EU Regulation’ means Regulation (EU) 2016/424 of the European Parliament and of the Council of 9 March 2016 on cableway installations and repealing Directive 2000/9/EC as that Regulation has effect in EU law as amended from time to time;

(29)

‘the Executive’ means—

(a)

in Great Britain, the Health and Safety Executive,

(b)

in Northern Ireland, the Health and Safety Executive for Northern Ireland;

(30)

‘designated standard’ has the meaning given by article 3A;

(31)

‘RAMS’ means Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93;

(32)

‘UK marking’ means marking in the form published in accordance with Article 30(1) of RAMS.]

Textual Amendments

F3 Word in Art. 3(10) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(a); 2020 c. 1, Sch. 5 para. 1(1)

F4 Word in Art. 3(11) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(b); 2020 c. 1, Sch. 5 para. 1(1)

F5 Words in Art. 3(14) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(c); 2020 c. 1, Sch. 5 para. 1(1)

F6 Words in Art. 3(15) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(d)(i); 2020 c. 1, Sch. 5 para. 1(1)

F7 Word in Art. 3(15) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(d)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F8 Art. 3(19) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(e); 2020 c. 1, Sch. 5 para. 1(1)

F9 Art. 3(21) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(f); 2020 c. 1, Sch. 5 para. 1(1)

F10 Art. 3(26) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(g); 2020 c. 1, Sch. 5 para. 1(1)

F11 Art. 3(27) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(h); 2020 c. 1, Sch. 5 para. 1(1)

F12 Art. 3(28)-(32) inserted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 14(i); 2020 c. 1, Sch. 5 para. 1(1)

[F13 Article 3A U.K. Designated Standards

1. For the purposes of this Regulation, a designated standard is a technical standard—

(a) which is adopted by the British Standards Institution [F14 or an international standardising body] for repeated or continuous application; and

(b) which has been designated by the Secretary of State by publishing its reference number in a manner the Secretary of State considers appropriate.

2. In this Article, a “technical standard” means a document that prescribes technical requirements to be fulfilled by a cableway installation, infrastructure, subsystem or safety component and which lays down one or more of the following—

(a) the characteristics required including—

(i) levels of quality, performance, interoperability, environmental protection, health, safety or dimensions, and

(ii) requirements applicable as regards the name under which a product is sold, terminology, symbols, testing and test methods, packaging, marking or labelling and conformity assessment procedures;

(b) production methods and processes where these have an effect on the characteristics of a product.

[F15 2A. Before publishing the reference number of a technical standard adopted by the British Standards Institution, the Secretary of State must have regard to whether the technical standard is consistent with any standards adopted by international standardising bodies which the Secretary of State considers to be relevant.]

3. When considering whether the manner of publication of the reference number of a technical standard under paragraph 1(b) is appropriate, the Secretary of State must have regard to whether that manner will draw sufficient attention to the standard to all persons who may have an interest in it.

4. The Secretary of State may remove the reference number of a technical standard from publication and where such a reference number is removed, the technical standard is no longer a designated standard.

5. Harmonised standards, within the meaning of Article 3(19) of the EU Regulation, have effect as designated standards until the Secretary of State designates standards under this Regulation.

[F16 6. In this Article “international standardising body” has the same meaning as it has for the purposes of the Agreement on Technical Barriers to Trade, part of Annex 1A to the agreement establishing the World Trade Organisation signed at Marrakesh on 15 April 1994 (as modified from time to time).]]

Textual Amendments

F13 Art. 3A inserted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 15; 2020 c. 1, Sch. 5 para. 1(1)

F14 Words in Art. 3A(1)(a) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 22(a); S.I. 2020/1662, reg. 2(ee)

F15 Art. 3A(2A) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 22(b); S.I. 2020/1662, reg. 2(ee)

F16 Art. 3A(6) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 22(c); S.I. 2020/1662, reg. 2(ee)

Article 4 U.K. Making available on the market of subsystems and safety components

Subsystems and safety components shall only be made available on the market if they comply with this Regulation.

[F17 Article 5 U.K. Presumption of conformity of cableway installations

Cableway installations which are in conformity with designated standards, or parts thereof, are presumed to be in conformity with the essential requirements set out in Annex 2 covered by those standards or parts thereof.]

Textual Amendments

F17 Art. 5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 16; 2020 c. 1, Sch. 5 para. 1(1)

Article 6 U.K. Essential requirements

The cableway installations and their infrastructure, subsystems and safety components shall meet the essential requirements set out in Annex II which apply to them.

F18 Article 7 U.K. Free movement of subsystems and safety components

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F18 Art. 7 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 17; 2020 c. 1, Sch. 5 para. 1(1)

Article 8 U.K. Safety analysis and safety report for planned cableway installations

1. The person responsible for the cableway installationF19 ... shall carry out a safety analysis of the planned cableway installation or have such a safety analysis carried out.

2. The safety analysis required for each cableway installation shall:

(a) take into account all modes of operation envisaged;

(b) follow a recognised or established method;

(c) take into account the current state of the art and the complexity of the cableway installation in question;

(d) ensure that the design and configuration of the cableway installation takes account of the local surroundings and the most adverse situations in order to ensure satisfactory safety conditions;

(e) cover all safety aspects of the cableway installation and its external factors in the context of the design, construction and entry into service;

(f) make it possible to identify from past experience risks liable to occur during the operation of the cableway installation.

3. The safety analysis shall also cover the safety devices and their effects on the cableway installation and related subsystems that they bring into action so that the safety devices:

(a) are capable of reacting to an initial breakdown or failure detected so as to remain either in a state that guarantees safety, in a lower operating mode or in a fail-safe state;

(b) are redundant and are monitored; or

(c) are such that the probability of their failure can be evaluated and their effects are of a standard equivalent to that achieved by safety devices that meet the criteria set out in points (a) and (b).

4. The safety analysis shall be used to draw up the inventory of risks and dangerous situations, to recommend the measures envisaged to deal with such risks and to determine the list of subsystems and safety components to be incorporated into the cableway installation.

5. The result of the safety analysis shall be included in a safety report.

Textual Amendments

F19 Words in Art. 8(1) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 18; 2020 c. 1, Sch. 5 para. 1(1)

Article 9 U.K. Authorisation of cableway installations

F20 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. The person responsible for the cableway installationF21 ... shall submit the safety report referred to in Article 8, the [F22 declaration] of conformity and the other documents relating to the conformity of subsystems and safety components as well as the documentation concerning the characteristics of the cableway installation to the authority or body responsible for authorising the cableway installation. The documentation concerning the cableway installation shall also include the necessary conditions, including the restrictions on operation, and full details for servicing, supervision, adjustment and maintenance of the cableway installation. A copy of those documents shall be kept at the cableway installation.

3. In the event that important characteristics, subsystems or safety components of existing cableway installations undergo modifications for which a new authorisation for entry into service is required by the [F23 Secretary of State], such modifications and their repercussions on the cableway installation as a whole shall satisfy the essential requirements set out in Annex II.

F24 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F25 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F20 Art. 9(1) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 19(a); 2020 c. 1, Sch. 5 para. 1(1)

F21 Words in Art. 9(2) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 19(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

F22 Word in Art. 9(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 19(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F23 Words in Art. 9(3) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 19(c); 2020 c. 1, Sch. 5 para. 1(1)

F24 Art. 9(4) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 19(d); 2020 c. 1, Sch. 5 para. 1(1)

F25 Art. 9(5) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 19(d); 2020 c. 1, Sch. 5 para. 1(1)

F26 Article 10 U.K. Operation of cableway installations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F26 Art. 10 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 20; 2020 c. 1, Sch. 5 para. 1(1)

CHAPTER II U.K. OBLIGATIONS OF ECONOMIC OPERATORS

Article 11 U.K. Obligations of manufacturers

1. When placing their subsystems or safety components on the market or when incorporating them into a cableway installation, manufacturers shall ensure that they have been designed and manufactured in accordance with the essential requirements set out in Annex II.

2. Manufacturers of subsystems or safety components shall draw up the technical documentation set out in Annex VIII (‘technical documentation’) and carry out the relevant conformity assessment procedure referred to in Article 18 or have it carried out.

Where compliance of a subsystem or a safety component with the applicable requirements has been demonstrated by the procedure referred to in the first subparagraph, manufacturers shall draw up [F27 a declaration of conformity] and affix the [F28 UK marking].

3. Manufacturers shall keep the technical documentation and [F29 the declaration of conformity] for 30 years after the subsystem or the safety component has been placed on the market.

4. Manufacturers shall ensure that procedures are in place for series production to remain in conformity with this Regulation. Changes in subsystem or safety component design or characteristics and changes in the harmonised standards or in other technical specifications by reference to which the conformity of the subsystem or the safety component is declared shall be adequately taken into account.

When deemed appropriate with regard to the risks presented by a subsystem or a safety component, manufacturers shall, to protect the health and safety of passengers, operating personnel and third parties, carry out sample testing of subsystems or safety components made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming subsystems and safety components and recalls of such subsystems and safety components, and shall keep distributors informed of any such monitoring.

5. Manufacturers shall ensure that subsystems or safety components which they have placed on the market bear a type, batch or serial number or other element allowing their identification.

Where the size or nature of the subsystem or safety component does not allow it, manufacturers shall ensure that the required information is provided on the packaging or in a document accompanying the subsystem or safety component.

6. Manufacturers shall indicate on the subsystem or the safety component their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where that is not possible, on the packaging or in a document accompanying the subsystem or safety component. The address shall indicate a single point at which the manufacturer can be contacted. The contact details shall be in [F30 English]. Where the manufacturer indicates a website address, he shall ensure that the information on that website is accessible and kept updated.

7. Manufacturers shall ensure that the subsystem or the safety component is accompanied by a copy of [F29 the declaration of conformity] and by instructions and safety information, in [F31 English]. Such instructions and safety information shall be clear, understandable and intelligible.

However, where a large number of subsystems or safety components are delivered to a single economic operator or user, the batch or consignment concerned may be accompanied by a single copy of [F29 the declaration of conformity].

8. Manufacturers who consider or have reason to believe that a subsystem or a safety component which they have placed on the market is not in conformity with this Regulation shall immediately take the corrective measures necessary to bring that subsystem or safety component into conformity, to withdraw it or recall it, if appropriate. Furthermore, where the subsystem or the safety component presents a risk, manufacturers shall immediately inform the [F32 Executive] to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

9. Manufacturers shall, further to a reasoned request from [F33 the Executive], provide it with all the information and documentation necessary to demonstrate the conformity of the subsystem or the safety component with this Regulation, in [F34 English]. That information and documentation may be provided in paper or electronic form. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by subsystems or safety components which they have placed on the market.

Textual Amendments

F27 Words in Art. 11(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

F28 Words in Art. 11(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F29 Words in Art. 11 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(a); 2020 c. 1, Sch. 5 para. 1(1)

F30 Word in Art. 11(6) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(c); 2020 c. 1, Sch. 5 para. 1(1)

F31 Word in Art. 11(7) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(d); 2020 c. 1, Sch. 5 para. 1(1)

F32 Word in Art. 11(8) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(e); 2020 c. 1, Sch. 5 para. 1(1)

F33 Words in Art. 11(9) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(f)(i); 2020 c. 1, Sch. 5 para. 1(1)

F34 Word in Art. 11(9) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 21(f)(ii); 2020 c. 1, Sch. 5 para. 1(1)

Article 12 U.K. Authorised representatives

1. A manufacturer may, by a written mandate, appoint an authorised representative.

The obligations laid down in Article 11(1) and the obligation to draw up technical documentation shall not form part of the authorised representative's mandate.

2. An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow the authorised representative to do at least the following:

(a) keep the [F35 declaration] of conformity and the technical documentation at the disposal of [F36 the Executive] for 30 years after the subsystem or the safety component has been placed on the market;

(b) further to a reasoned request from [F37 the Secretary of State], provide that authority with all the information and documentation necessary to demonstrate the conformity of the subsystem or the safety component;

(c) cooperate with the [F38 Secretary of State, at the Secretary of State's] request, on any action taken to eliminate the risks posed by subsystems or safety components covered by the authorised representative's mandate.

Textual Amendments

F35 Word in Art. 12(2)(a) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 22(a)(i); 2020 c. 1, Sch. 5 para. 1(1)

F36 Words in Art. 12(2)(a) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 22(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F37 Words in Art. 12(2)(b) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 22(b); 2020 c. 1, Sch. 5 para. 1(1)

F38 Words in Art. 12(2)(c) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 22(c); 2020 c. 1, Sch. 5 para. 1(1)

Article 13 U.K. Obligations of importers

1. Importers shall place only compliant subsystems or safety components on the market.

2. Before placing on the market a subsystem or a safety component, importers shall ensure that the appropriate conformity assessment procedure referred to in Article 18 has been carried out by the manufacturer. They shall ensure that the manufacturer has drawn up the technical documentation, that the subsystem or the safety component bears the [F39 UK marking] and that it is accompanied by a copy of the [F40 declaration] of conformity, by instructions and safety information, and, where appropriate, by other required documents, and that the manufacturer has complied with the requirements set out in Article 11(5) and (6).

Where an importer considers or has reason to believe that a subsystem or a safety component is not in conformity with the applicable essential requirements set out in Annex II, he shall not place the subsystem or the safety component on the market until it has been brought into conformity. Furthermore, where the subsystem or the safety component presents a risk, the importer shall inform the manufacturer and the [F41 Executive] to that effect.

3. Importers shall indicate on the subsystem or the safety component their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where that is not possible, on its packaging or in a document accompanying the subsystem or safety component. The contact details shall be in [F42 English].

Where the importer indicates a website address, he shall ensure that the information on that website is accessible and kept updated.

4. Importers shall ensure that the subsystem or the safety component is accompanied by instructions and safety information, [F43 in English].

5. Importers shall ensure that, while a subsystem or a safety component is under their responsibility, storage or transport conditions do not jeopardise its compliance with the applicable essential requirements set out in Annex II.

6. When deemed appropriate with regard to the risks presented by a subsystem or a safety component, importers shall, to protect the health and safety of the passengers, operating personnel and third parties, carry out sample testing of subsystems or safety components made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming subsystems and safety components and recalls of such subsystems and safety components, and shall keep distributors informed of any such monitoring.

7. Importers who consider or have reason to believe that a subsystem or a safety component which they have placed on the market is not in conformity with this Regulation shall immediately take the corrective measures necessary to bring that subsystem or safety component into conformity, to withdraw it or recall it, if appropriate. Furthermore, where the subsystem or the safety component presents a risk, importers shall immediately inform the [F44 Secretary of State] to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

8. Importers shall, for 30 years after the subsystem or the safety component has been placed on the market, keep a copy of the [F45 declaration] of conformity at the disposal of the [F46 Executive] and ensure that the technical documentation can be made available to [F47 the Executive], upon request.

9. Importers shall, further to a reasoned request from [F48 the Secretary of State, provide the Secretary of State] with all the information and documentation necessary to demonstrate the conformity of a subsystem or a safety component, in [F49 English]. That information and documentation may be provided in paper or electronic form. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by subsystems or safety components which they have placed on the market.

Textual Amendments

F39 Words in Art. 13(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(a)(i); 2020 c. 1, Sch. 5 para. 1(1)

F40 Word in Art. 13(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F41 Word in Art. 13(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(a)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F42 Word in Art. 13(3) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(b); 2020 c. 1, Sch. 5 para. 1(1)

F43 Words in Art. 13(4) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(c); 2020 c. 1, Sch. 5 para. 1(1)

F44 Words in Art. 13(7) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(d); 2020 c. 1, Sch. 5 para. 1(1)

F45 Word in Art. 13(8) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(e)(i); 2020 c. 1, Sch. 5 para. 1(1)

F46 Word in Art. 13(8) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F47 Words in Art. 13(8) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(e)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F48 Words in Art. 13(9) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(f)(i); 2020 c. 1, Sch. 5 para. 1(1)

F49 Word in Art. 13(9) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 23(f)(ii); 2020 c. 1, Sch. 5 para. 1(1)

Article 14 U.K. Obligations of distributors

1. When making a subsystem or a safety component available on the market, distributors shall act with due care in relation to the requirements of this Regulation.

2. Before making a subsystem or a safety component available on the market, distributors shall verify that the subsystem or the safety component bears the [F50 UK marking] and that it is accompanied by a copy of the [F51 declaration] of conformity, by instructions and safety information, and, where appropriate, by other required documents, [F52 in English] and that the manufacturer and the importer have complied with the requirements set out in Article 11(5) and (6) and Article 13(3) respectively.

Where a distributor considers or has reason to believe that a subsystem or a safety component is not in conformity with the applicable essential requirements set out in Annex II, he shall not make the subsystem or the safety component available on the market until it has been brought into conformity. Furthermore, where the subsystem or the safety component presents a risk, the distributor shall inform the manufacturer or the importer to that effect as well as the [F53 Executive].

3. Distributors shall ensure that, while a subsystem or a safety component is under their responsibility, storage or transport conditions do not jeopardise its compliance with the applicable essential requirements set out in Annex II.

4. Distributors who consider or have reason to believe that a subsystem or a safety component which they have made available on the market is not in conformity with this Regulation shall make sure that the corrective measures necessary to bring that subsystem or safety component into conformity, to withdraw it or recall it, if appropriate, are taken. Furthermore, where the subsystem or the safety component presents a risk, distributors shall immediately inform the [F54 Secretary of State] to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

5. Distributors shall, further to a reasoned request from [F55 the Secretary of State, provide the Secretary of State] with all the information and documentation necessary to demonstrate the conformity of a subsystem or a safety component. That information and documentation may be provided in paper or electronic form. They shall cooperate with [F56 the Secretary of State, at the Secretary of State's] request, on any action taken to eliminate the risks posed by subsystems or safety components which they have made available on the market.

Textual Amendments

F50 Words in Art. 14(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(a)(i); 2020 c. 1, Sch. 5 para. 1(1)

F51 Word in Art. 14(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F52 Words in Art. 14(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(a)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F53 Word in Art. 14(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(a)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F54 Words in Art. 14(4) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(b); 2020 c. 1, Sch. 5 para. 1(1)

F55 Words in Art. 14(5) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(c)(i); 2020 c. 1, Sch. 5 para. 1(1)

F56 Words in Art. 14(5) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 24(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)

Article 15 U.K. Cases in which obligations of manufacturers apply to importers and distributors

An importer or distributor shall be considered a manufacturer for the purposes of this Regulation and shall be subject to the obligations of the manufacturer under Article 11, where he places a subsystem or a safety component on the market under his name or trade mark or modifies a subsystem or a safety component already placed on the market in such a way that compliance with the requirements of this Regulation may be affected.

Article 16 U.K. Identification of economic operators

Economic operators shall, on request, identify the following to the [F57 Executive]:

(a)

any economic operator who has supplied them with a subsystem or a safety component;

(b)

any economic operator and any person responsible for a cableway installation to whom they have supplied a subsystem or a safety component.

Economic operators shall be able to present the information referred to in the first paragraph for 30 years after they have been supplied with the subsystem or the safety component and for 30 years after they have supplied the subsystem or the safety component.

Textual Amendments

F57 Word in Art. 16 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 25; 2020 c. 1, Sch. 5 para. 1(1)

CHAPTER III U.K. CONFORMITY OF SUBSYSTEMS AND SAFETY COMPONENTS

Article 17 U.K. Presumption of conformity of subsystems and safety components

Subsystems and safety components which are in conformity with [F58 designated standards] shall be presumed to be in conformity with the essential requirements set out in Annex II covered by those standards or parts thereof.

Textual Amendments

F58 Words in Art. 17 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 26; 2020 c. 1, Sch. 5 para. 1(1)

Article 18 U.K. Conformity assessment procedures

1. Before a subsystem or a safety component is placed on the market, the manufacturer shall submit the subsystem or the safety component to a conformity assessment procedure in accordance with paragraph 2.

2. The conformity of subsystems and safety components shall be assessed, at the choice of the manufacturer, by means of any of the following conformity assessment procedures:

(a) [F59 Type] examination (Module B — production type), set out in Annex III combined with one of the following:

(i)

conformity to type based on quality assurance of the production process (Module D), set out in Annex IV;

(ii)

conformity to type based on subsystem or safety component verification (Module F), set out in Annex V;

(b) conformity based on unit verification (Module G), set out in Annex VI;

(c) conformity based on full quality assurance plus design examination (Module H 1), set out in Annex VII.

3. Records and correspondence relating to the conformity assessment procedures shall be drawn up in [F60 English].

Textual Amendments

F59 Word in Art. 18(2)(a) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 27(a); 2020 c. 1, Sch. 5 para. 1(1)

F60 Word in Art. 18(3) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 27(b); 2020 c. 1, Sch. 5 para. 1(1)

Article 19 U.K. [F61 Declaration] of conformity

1. The [F62 declaration] of conformity for a subsystem or a safety component shall state that the fulfilment of the essential requirements set out in Annex II has been demonstrated.

2. The [F62 declaration] of conformity shall have the model structure set out in Annex IX, shall contain the elements specified in the relevant modules set out in Annexes III to VII and shall be continuously updated. It shall accompany the subsystem or the safety component [F63 and be in English].

[F64 3. Where a subsystem or a safety component is subject to more than one enactment requiring a declaration of conformity, a single declaration of conformity must be drawn up in respect of all such enactments. That declaration must contain the identification of the enactments concerned.]

4. By drawing up the [F62 declaration] of conformity, the manufacturer shall assume responsibility for the compliance of the subsystem or the safety component with the requirements laid down in this Regulation.

Textual Amendments

F61 Word in Art. 19 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 28(a); 2020 c. 1, Sch. 5 para. 1(1)

F62 Word in Art. 19 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 28(b); 2020 c. 1, Sch. 5 para. 1(1)

F63 Words in Art. 19(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 28(c); 2020 c. 1, Sch. 5 para. 1(1)

F64 Art. 19(3) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 28(d); 2020 c. 1, Sch. 5 para. 1(1)

[F65 Article 20 U.K. Requirements of the UK marking

The UK marking is subject to the requirements set out in Article 30 of, and Annex 2 to, Regulation (EC) No 765/2008.]

Textual Amendments

F65 Art. 20 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 29; 2020 c. 1, Sch. 5 para. 1(1)

Article 21 U.K. Rules and conditions for affixing the [F66 UK marking]

1. The [F67 UK marking] shall be affixed visibly, legibly and indelibly to the subsystem or the safety component or to its data plate. Where that is not possible or not warranted on account of the nature of the subsystem or the safety component, it shall be affixed to the packaging and to the accompanying documents.

2. The [F67 UK marking] shall be affixed before the subsystem or the safety component is placed on the market.

3. The [F67 UK marking] shall be followed by the identification number of the notified body involved in the production control phase. The identification number of the notified body shall be affixed by the body itself or, under its instructions, by the manufacturer or his authorised representative.

4. The [F67 UK marking] and the identification number referred to in paragraph 3 may be followed by any other mark indicating a special risk or use.

F68 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F66 Words in Art. 21 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 30(a); 2020 c. 1, Sch. 5 para. 1(1)

F67 Words in Art. 21 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 30(a); 2020 c. 1, Sch. 5 para. 1(1)

F68 Art. 21(5) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 30(b); 2020 c. 1, Sch. 5 para. 1(1)

CHAPTER IV U.K. NOTIFICATION OF CONFORMITY ASSESSMENT BODIES

[F69 Article 22 U.K. Approval

1. The Secretary of State may approve bodies to carry out third-party conformity assessment tasks under this Regulation.

2. The Secretary of State must—

(a) assign an approved body identification number to each approved body;

(b) compile and maintain a register of approved bodies containing in relation to each body—

(i) the approved body identification number,

(ii) details of the activities for which the body is approved, and

(iii) any restrictions on the activities for which the body is approved.

3. The register referred to in paragraph 2 must be made publicly available.]

Textual Amendments

F69 Art. 22 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 31; 2020 c. 1, Sch. 5 para. 1(1)

F70 Article 23 U.K. Notifying authorities

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F70 Arts. 23-25 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 32; 2020 c. 1, Sch. 5 para. 1(1)

F70 Article 24 U.K. Requirements relating to notifying authorities

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F70 Arts. 23-25 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 32; 2020 c. 1, Sch. 5 para. 1(1)

F70 Article 25 U.K. Information obligation on notifying authorities

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F70 Arts. 23-25 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 32; 2020 c. 1, Sch. 5 para. 1(1)

Article 26 U.K. Requirements relating to [F71 approved] bodies

1. For the purposes of [F72 approval], a conformity assessment body shall meet the requirements laid down in [F73 paragraphs 3 to 10].

F74 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. A conformity assessment body shall be a third-party body independent of the organisation or the subsystem or the safety component it assesses.

A body belonging to a business association or professional federation representing undertakings involved in the design, manufacturing, provision, assembly, use or maintenance of subsystems or safety components which it assesses, may, on the condition that its independence and the absence of any conflict of interest are demonstrated, be considered such a body.

4. A conformity assessment body, its top-level management and the personnel responsible for carrying out the conformity assessment tasks shall not be the designer, manufacturer, supplier, installer, purchaser, owner, user or maintainer of the subsystems or the safety components which they assess, nor the representative of any of those parties. This shall not preclude the use of assessed subsystems or safety components that are necessary for the operations of the conformity assessment body or the use of such subsystems or safety components for personal purposes.

A conformity assessment body, its top-level management and the personnel responsible for carrying out the conformity assessment tasks shall not be directly involved in the design, manufacture or construction, marketing, installation, use or maintenance of those subsystems or safety components, or represent the parties engaged in those activities. They shall not engage in any activity that may conflict with their independence of judgement or integrity in relation to conformity assessment activities for which they are notified. This shall in particular apply to consultancy services.

Conformity assessment bodies shall ensure that the activities of their subsidiaries or subcontractors do not affect the confidentiality, objectivity or impartiality of their conformity assessment activities.

5. Conformity assessment bodies and their personnel shall carry out the conformity assessment activities with the highest degree of professional integrity and the requisite technical competence in the specific field and shall be free from all pressures and inducements, particularly financial, which might influence their judgement or the results of their conformity assessment activities, especially as regards persons or groups of persons with an interest in the results of those activities.

6. A conformity assessment body shall be capable of carrying out all the conformity assessment tasks assigned to it by Annexes III to VII and in relation to which it has been notified, whether those tasks are carried out by the conformity assessment body itself or on its behalf and under its responsibility.

At all times, and for each conformity assessment procedure and each kind or category of subsystems or safety components in relation to which it has been notified, a conformity assessment body shall have at its disposal the necessary:

(a) personnel with technical knowledge and sufficient and appropriate experience to perform the conformity assessment tasks;

(b) descriptions of procedures in accordance with which conformity assessment is carried out, ensuring the transparency and the ability of reproduction of those procedures. It shall have appropriate policies and procedures in place that distinguish between tasks it carries out as a notified body and other activities;

(c) procedures for the performance of activities which take due account of the size of an undertaking, the sector in which it operates, its structure, the degree of complexity of the subsystem or safety component technology in question and the mass or serial nature of the production process.

A conformity assessment body shall have the means necessary to perform the technical and administrative tasks connected with the conformity assessment activities in an appropriate manner and shall have access to all necessary equipment or facilities.

7. The personnel responsible for carrying out conformity assessment tasks shall have the following:

(a) sound technical and vocational training covering all the conformity assessment activities in relation to which the conformity assessment body has been notified;

(b) satisfactory knowledge of the requirements of the assessments they carry out and adequate authority to carry out those assessments;

(c) appropriate knowledge and understanding of the essential requirements set out in Annex II, of the applicable [F75 designated standards and of the relevant provisions of this Regulation and of the Cableway Installations Regulations 2018];

(d) the ability to draw up certificates, records and reports demonstrating that assessments have been carried out.

8. The impartiality of the conformity assessment bodies, their top-level management and of the personnel responsible for carrying out the conformity assessment tasks shall be guaranteed.

The remuneration of the top-level management and of the personnel responsible for carrying out the conformity assessment tasks of a conformity assessment body shall not depend on the number of assessments carried out, nor on the results of those assessments.

9. Conformity assessment bodies shall take out liability insurance F76 ....

10. The personnel of a conformity assessment body shall observe professional secrecy with regard to all information obtained in carrying out their tasks under Annexes III to VII F77 ..., except in relation to the [F78 Secretary of State or the Executive]. Proprietary rights shall be protected.

F79 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F71 Word in Art. 26 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(a); 2020 c. 1, Sch. 5 para. 1(1)

F72 Word in Art. 26(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

F73 Words in Art. 26(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F74 Art. 26(2) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(c); 2020 c. 1, Sch. 5 para. 1(1)

F75 Words in Art. 26(7)(c) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(d); 2020 c. 1, Sch. 5 para. 1(1)

F76 Words in Art. 26(9) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(e); 2020 c. 1, Sch. 5 para. 1(1)

F77 Words in Art. 26(10) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(f)(i); 2020 c. 1, Sch. 5 para. 1(1)

F78 Words in Art. 26(10) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(f)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F79 Art. 26(11) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 33(g); 2020 c. 1, Sch. 5 para. 1(1)

Article 27 U.K. Presumption of conformity of notified bodies

[F80 1.] Where a conformity assessment body demonstrates its conformity with the criteria laid down in the relevant harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, it shall be presumed to comply with the requirements set out in Article 26 in so far as the applicable harmonised standards cover those requirements.

[F81 2. In paragraph 1, expressions used are to be given the same meaning as in the EU Regulation.]

Textual Amendments

F80 Art. 27 renumbered as Art. 27(1) (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 34(a); 2020 c. 1, Sch. 5 para. 1(1)

F81 Art. 27(2) inserted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 34(b); 2020 c. 1, Sch. 5 para. 1(1)

Article 28 U.K. Subsidiaries of and subcontracting by [F82 approved] bodies

1. Where [F83 an approved] body subcontracts specific tasks connected with conformity assessment or has recourse to a subsidiary, it shall ensure that the subcontractor or the subsidiary meets the requirements set out in Article 26 and shall inform the [F84 Secretary of State] accordingly.

2. [F85 Approved] bodies shall take full responsibility for the tasks performed by subcontractors or subsidiaries wherever these are established.

3. Activities may be subcontracted or carried out by a subsidiary only with the agreement of the client.

4. [F86 Approved] bodies shall keep at the disposal of the [F87 Secretary of State] the relevant documents concerning the assessment of the qualifications of the subcontractor or the subsidiary and the work carried out by them under Annexes III to VII.

Textual Amendments

F82 Word in Art. 28 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 35(a); 2020 c. 1, Sch. 5 para. 1(1)

F83 Words in Art. 28(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 35(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

F84 Words in Art. 28(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 35(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F85 Word in Art. 28(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 35(c); 2020 c. 1, Sch. 5 para. 1(1)

F86 Word in Art. 28(4) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 35(d)(i); 2020 c. 1, Sch. 5 para. 1(1)

F87 Words in Art. 28(4) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 35(d)(ii); 2020 c. 1, Sch. 5 para. 1(1)

Article 29 U.K. Application for [F88 approval]

1. A conformity assessment body shall submit an application for [F89 approval] to the [F90 Secretary of State].

2. The application for notification shall be accompanied by a description of the conformity assessment activities, the conformity assessment module or modules and the subsystem/safety component or subsystems/safety components for which that body claims to be competent, as well as by an accreditation certificate, where one exists, issued by [F91 the United Kingdom Accreditation Service] attesting that the conformity assessment body fulfils the requirements laid down in Article 26.

3. Where the conformity assessment body concerned cannot provide an accreditation certificate, it shall provide the notifying authority with all the documentary evidence necessary for the verification, recognition and regular monitoring of its compliance with the requirements laid down in Article 26.

Textual Amendments

F88 Word in Art. 29 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 36(a); 2020 c. 1, Sch. 5 para. 1(1)

F89 Word in Art. 29(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 36(a); 2020 c. 1, Sch. 5 para. 1(1)

F90 Words in Art. 29(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 36(b); 2020 c. 1, Sch. 5 para. 1(1)

F91 Words in Art. 29(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 36(c); 2020 c. 1, Sch. 5 para. 1(1)

F92 Article 30 U.K. Notification procedure

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F92 Art. 30 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 37; 2020 c. 1, Sch. 5 para. 1(1)

F93 Article 31 U.K. Identification numbers and lists of notified bodies

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F93 Art. 31 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 37; 2020 c. 1, Sch. 5 para. 1(1)

Article 32 U.K. Changes to [F94 approvals]

1. Where [F95 the Secretary of State] has ascertained or has been informed that [F96 an approved] body no longer meets the requirements laid down in Article 26 or that it is failing to fulfil its obligations, [F97 the Secretary of State] shall restrict, suspend or withdraw the [F98 approval], as appropriate, depending on the seriousness of the failure to meet those requirements or fulfil those obligations. F99 ...

2. In the event of restriction, suspension or withdrawal of notification, or where [F100 the approved] body has ceased its activity, the [F101 Secretary of State] shall take appropriate steps to ensure that the files of that body are either processed by [F102 another approved] body or kept available for the [F103 Secretary of State and the Executive] at their request.

Textual Amendments

F94 Word in Art. 32 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(a); 2020 c. 1, Sch. 5 para. 1(1)

F95 Words in Art. 32(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

F96 Words in Art. 32(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F97 Words in Art. 32(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(b)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F98 Word in Art. 32(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(b)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F99 Words in Art. 32(1) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(b)(v); 2020 c. 1, Sch. 5 para. 1(1)

F100 Words in Art. 32(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(c)(i); 2020 c. 1, Sch. 5 para. 1(1)

F101 Words in Art. 32(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F102 Words in Art. 32(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(c)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F103 Words in Art. 32(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 38(c)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F104 Article 33 U.K. Challenge of the competence of notified bodies

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F104 Art. 33 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 39; 2020 c. 1, Sch. 5 para. 1(1)

Article 34 U.K. Operational obligations of [F105 approved bodies]

1. [F106 Approved bodies] shall carry out conformity assessments in accordance with the conformity assessment procedures provided for in Annexes III to VII.

2. Conformity assessments shall be carried out in a proportionate manner, avoiding unnecessary burdens for economic operators.

Conformity assessment bodies shall perform their activities taking due account of the size of an undertaking, the sector in which it operates, its structure, the degree of complexity of the subsystem or safety component technology in question and the mass or serial nature of the production process.

In so doing, they shall nevertheless respect the degree of rigour and the level of protection required for the compliance of the subsystem or the safety component with this Regulation.

3. Where [F107 an approved body] finds that the essential requirements set out in Annex II or [F108 corresponding designated standards] or other technical specifications have not been met by a manufacturer, it shall require that manufacturer to take appropriate corrective measures and shall not issue a certificate or approval decision.

4. Where, in the course of the monitoring of conformity following the issue of a certificate or approval decision, [F109 an approved body] finds that a subsystem or a safety component no longer complies, it shall require the manufacturer to take appropriate corrective measures and shall suspend or withdraw the certificate or the approval decision if necessary.

5. Where corrective measures are not taken or do not have the required effect, [F110 the approved body] shall restrict, suspend or withdraw any certificates or approval decisions, as appropriate.

Textual Amendments

F105 Words in Art. 34 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 40(a); 2020 c. 1, Sch. 5 para. 1(1)

F106 Words in Art. 34(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 40(b); 2020 c. 1, Sch. 5 para. 1(1)

F107 Words in Art. 34(3) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 40(c)(i); 2020 c. 1, Sch. 5 para. 1(1)

F108 Words in Art. 34(3) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 40(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F109 Words in Art. 34(4) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 40(d); 2020 c. 1, Sch. 5 para. 1(1)

F110 Words in Art. 34(5) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 40(e); 2020 c. 1, Sch. 5 para. 1(1)

Article 35 U.K. Appeal against decisions of [F111 approved] bodies

[F112 Approved] bodies shall ensure that an appeal procedure against their decisions is available.

Textual Amendments

F111 Word in Art. 35 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 41(a); 2020 c. 1, Sch. 5 para. 1(1)

F112 Word in Art. 35 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 41(b); 2020 c. 1, Sch. 5 para. 1(1)

Article 36 U.K. Information obligation on [F113 approved bodies]

1. [F114 Approved bodies] shall inform the [F115 Secretary of State] of the following:

(a) any refusal, restriction, suspension or withdrawal of a certificate or approval decision;

(b) any circumstances affecting the scope of or the conditions for [F116 approval];

(c) any request for information which they have received from [F117 the Executive] regarding conformity assessment activities;

(d) on request, conformity assessment activities performed within the scope of their [F118 approval] and any other activity performed, including cross-border activities and subcontracting.

2. [F119 Approved bodies] shall provide the other bodies [F120 approved under] this Regulation carrying out similar conformity assessment activities covering the same subsystems or safety components with relevant information on issues relating to negative and, on request, positive conformity assessment results.

Textual Amendments

F113 Words in Art. 36 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(a); 2020 c. 1, Sch. 5 para. 1(1)

F114 Words in Art. 36(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(b)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F115 Words in Art. 36(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(b)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F116 Word in Art. 36(1)(b) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F117 Words in Art. 36(1)(c) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(b)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F118 Word in Art. 36(1)(d) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(b)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F119 Words in Art. 36(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(c)(i); 2020 c. 1, Sch. 5 para. 1(1)

F120 Words in Art. 36(2) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 42(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F121 Article 37 U.K. Exchange of experience

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F121 Art. 37 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 43; 2020 c. 1, Sch. 5 para. 1(1)

F122 Article 38 U.K. Coordination of notified bodies

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F122 Art. 38 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 43; 2020 c. 1, Sch. 5 para. 1(1)

CHAPTER V U.K. F123 ... MARKET SURVEILLANCE, CONTROL OF SUBSYSTEMS AND SAFETY COMPONENTS ENTERING THE F123 ... MARKET AND F123 ... SAFEGUARD PROCEDURE

Article 39 U.K. F124 ... Market surveillance and control of subsystems and safety components entering the F124 ... market

Article 15(3) and [F125 Articles 16 to 21] of Regulation (EC) No 765/2008 shall apply to subsystems and safety components.

Textual Amendments

F124 Word in Art. 39 heading omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 44(1); 2020 c. 1, Sch. 5 para. 1(1)

F125 Words in Art. 39 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 44(2); 2020 c. 1, Sch. 5 para. 1(1)

Article 40 U.K. Procedure F126 ... for dealing with subsystems or safety components presenting a risk

1. Where the [F127 Executive has] sufficient reason to believe that a subsystem or safety component covered by this Regulation presents a risk to the health or safety of persons or to property, they shall carry out an evaluation in relation to the subsystem or safety component concerned, covering all relevant requirements laid down in this Regulation. The relevant economic operators shall cooperate as necessary with the [F128 Executive] for that purpose.

Where, in the course of the evaluation referred to in the first subparagraph, the [F129 Executive finds] that the subsystem or safety component does not comply with the requirements laid down in this Regulation, [F130 it shall] without delay require the relevant economic operator to take all appropriate corrective actions to bring the subsystem or safety component into compliance with those requirements, to withdraw the subsystem or safety component from the market, or to recall it within a reasonable period, commensurate with the nature of the risk, as [F131 it may] prescribe.

The [F132 Executive] shall inform the relevant [F133 approved body] accordingly.

Article 21 of Regulation (EC) No 765/2008 shall apply to the measures referred to in the second subparagraph of this paragraph.

F134 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. The economic operator shall ensure that all appropriate corrective action is taken in respect of all the subsystems and safety components concerned that he has made available on the market F135 ....

F136 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F136 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F136 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F136 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F136 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F126 Words in Art. 40 heading omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(1); 2020 c. 1, Sch. 5 para. 1(1)

F127 Words in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F128 Word in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F129 Words in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F130 Words in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F131 Words in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(ii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F132 Word in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F133 Words in Art. 40(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(a)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F134 Art. 40(2) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(b); 2020 c. 1, Sch. 5 para. 1(1)

F135 Words in Art. 40(3) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(c); 2020 c. 1, Sch. 5 para. 1(1)

F136 Art. 40(4)-(8) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 45(2)(d); 2020 c. 1, Sch. 5 para. 1(1)

F137 Article 41 U.K. Union safeguard procedure

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F137 Art. 41 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 46; 2020 c. 1, Sch. 5 para. 1(1)

Article 42 U.K. Compliant subsystems or safety components which present a risk

1. Where, having carried out an evaluation under Article 40(1), [F138 the Executive] finds that although a subsystem or safety component is in compliance with this Regulation, it presents a risk to the health or safety of persons or to property, [F139 the Executive must require] the relevant economic operator to take all appropriate measures to ensure that the subsystem or safety component concerned, when placed on the market, no longer presents that risk, to withdraw the subsystem or safety component from the market or to recall it within a reasonable period, commensurate with the nature of the risk, as it may prescribe.

2. The economic operator shall ensure that corrective action is taken in respect of all the subsystems or safety components concerned that he has made available on the market F140 ....

F141 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F141 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F141 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F138 Words in Art. 42(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 47(a)(i); 2020 c. 1, Sch. 5 para. 1(1)

F139 Words in Art. 42(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 47(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F140 Words in Art. 42(2) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 47(b); 2020 c. 1, Sch. 5 para. 1(1)

F141 Art. 42(3)-(5) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 47(c); 2020 c. 1, Sch. 5 para. 1(1)

Article 43 U.K. Formal non-compliance

1. Without prejudice to Article 40, where [F142 the Executive] makes one of the following findings, it shall require the relevant economic operator to put an end to the non-compliance concerned:

(a) the [F143 UK marking] has been affixed in violation of Article 30 of Regulation (EC) No 765/2008 or of Article 21 of this Regulation;

(b) the [F144 UK marking] has not been affixed;

(c) the identification number of the [F145 approved] body involved in the production control phase has been affixed in violation of Article 21 or has not been affixed;

(d) the [F146 declaration] of conformity does not accompany the subsystem or safety component;

(e) the [F147 declaration] of conformity has not been drawn up;

(f) the [F148 declaration] of conformity has not been drawn up correctly;

(g) the technical documentation is either not available or not complete;

(h) the information referred to in Article 11(6) or Article 13(3) is absent, false or incomplete;

(i) any other administrative requirement provided for in Article 11 or Article 13 is not fulfilled.

F149 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F142 Words in Art. 43(1) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(i); 2020 c. 1, Sch. 5 para. 1(1)

F143 Words in Art. 43(1)(a) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F144 Words in Art. 43(1)(b) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F145 Word in Art. 43(1)(c) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(iii); 2020 c. 1, Sch. 5 para. 1(1)

F146 Word in Art. 43(1)(d) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F147 Word in Art. 43(1)(e) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F148 Word in Art. 43(1)(f) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(a)(iv); 2020 c. 1, Sch. 5 para. 1(1)

F149 Art. 43(2) omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 48(b); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F123 Word in Ch. 5 heading omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 44(1); 2020 c. 1, Sch. 5 para. 1(1)

CHAPTER VI U.K. COMMITTEE PROCEDURE, TRANSITIONAL AND FINAL PROVISIONS

F150 Article 44 U.K. Committee procedure

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F150 Arts. 44-46 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 49; 2020 c. 1, Sch. 5 para. 1(1)

F150 Article 45 U.K. Penalties

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F150 Arts. 44-46 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 49; 2020 c. 1, Sch. 5 para. 1(1)

F150 Article 46 U.K. Transitional provisions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F150 Arts. 44-46 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 49; 2020 c. 1, Sch. 5 para. 1(1)

[F151 Article 46A U.K. Post-withdrawal continuity provision

1. Paragraph 2 applies where, at any time before any technical standard has been adopted and designated as a designated standard in accordance with Article 3A—

(a) a subsystem or safety component has been assessed by a notified body in accordance with any of the EU conformity assessment procedures;

(b) an EU declaration of conformity has been drawn up in accordance with the EU Regulation in respect of that subsystem or safety component; and

(c) a CE marking has been affixed to that subsystem or safety component in accordance with the EU Regulation.

2. Where this paragraph applies—

(a) a subsystem or safety component is to be treated as having been assessed in accordance with the equivalent conformity assessment procedure in Chapter 3 of this Regulation; and

(b) the EU declaration of conformity and the CE marking are to be treated for the purposes of this Regulation and any other enactment relating to cableway installations as if they were respectively a declaration of conformity under this Regulation and a UK marking.

3. In this Article—

(a) “CE marking” has the same meaning as in Article 3(27) of the EU Regulation;

(b) “EU conformity assessment procedures” means the procedures provided for under Article 18(2) of the EU Regulation;

(c) “EU declaration of conformity” has the same meaning as in the EU Regulation;

(d) “notified body” means a body notified to the Commission under Article 22 of the EU Regulation.]

Textual Amendments

F151 Art. 46A inserted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 50; 2020 c. 1, Sch. 5 para. 1(1)

Article 47 U.K. Repeal

Directive 2000/9/EC is repealed with effect from 21 April 2018.

References to the repealed Directive shall be construed as references to this Regulation and shall be read in accordance with the correlation table in Annex X.

Article 48 U.K. Entry into force and application

1. This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

2. This Regulation shall apply from 21 April 2018, with the exception of:

(a) Articles 22 to 38 and 44, which shall apply from 21 October 2016;

(b) Article 45(1), which shall apply from 21 March 2018.

F152 ...

Textual Amendments

F152 Words in Signature omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 51; 2020 c. 1, Sch. 5 para. 1(1)

ANNEX I U.K. SUBSYSTEMS

A cableway installation is divided up into infrastructure and the subsystems listed below:

1.

Cables and cable connections.

2.

Drives and brakes.

3.

Mechanical equipment:

3.1.

Cable winding gear.

3.2.

Station machinery.

3.3.

Line engineering.

4.

Vehicles:

4.1.

Cabins, seats or drag devices.

4.2.

Suspension gear.

4.3.

Driving gear.

4.4.

Connections to the cable.

5.

Electrotechnical devices:

5.1.

Monitoring, control and safety devices.

5.2.

Communication and information equipment.

5.3.

Lightning protection equipment.

6.

Rescue equipment:

6.1.

Fixed rescue equipment.

6.2.

Mobile rescue equipment.

ANNEX II U.K. ESSENTIAL REQUIREMENTS

1. Purpose U.K.

This Annex sets out the essential requirements, including maintainability and operability, applicable to the design, construction and entry into service of cableway installations, and applicable to subsystems and safety components.

2. General requirements U.K.

2.1. Safety of persons U.K.

The safety of passengers, operating personnel and third parties is a fundamental requirement for the design, construction and operation of cableway installations.

2.2. Principles of safety U.K.

All cableway installations shall be designed, operated and serviced in accordance with the following principles, which are to be applied in the order given:

• eliminate or, if that is not possible, reduce risks by means of design and construction features,

• define and implement all necessary measures to protect against risks which cannot be eliminated by the design and construction features,

• define and state the precautions which should be taken to avoid the risks which it has not been possible to eliminate completely by means of the provisions and measures referred to in the first and second indents.

2.3. Consideration of external factors U.K.

Cableway installations must be so designed and constructed as to make it possible to operate them safely, taking into account the type of cableway installation, the nature and physical features of the terrain on which it is installed, its surroundings and atmospheric and meteorological factors, as well as possible structures and obstacles located in the vicinity either on the ground or in the air.

2.4. Dimensions U.K.

The cableway installation, the subsystems and all its safety components shall be dimensioned, designed and constructed to withstand, with a sufficient degree of safety, all stresses encountered under all foreseeable conditions, including those which occur when not in operation, and taking account in particular of outside influences, dynamic effects and fatigue phenomena, while complying with the acknowledged rules of the art, in particular with regard to the choice of materials.

2.5. Assembly U.K.

2.5.1. The cableway installation, the subsystems and all the safety components shall be designed and constructed in such a way as to ensure that they can be safely assembled and put into place. U.K.

2.5.2. The safety components shall be so designed as to make assembly mistakes impossible, either as a result of construction or by means of appropriate markings on the components themselves. U.K.

2.6. Integrity of the cableway installation U.K.

2.6.1. The safety components shall be designed and constructed and be usable in such a way as to ensure that, in every case, their own operational integrity and/or the safety of the cableway installation is ensured, as defined in the safety analysis provided for in Article 8, so that their failure is highly improbable and with an adequate safety margin. U.K.

2.6.2. The cableway installation shall be designed and constructed in such a way as to ensure that, during its operation, any failure of a component which might endanger safety, is met by an appropriate measure being taken in good time. U.K.

2.6.3. The safeguards referred to in points 2.6.1 and 2.6.2 shall apply throughout the period between two scheduled inspections of the component concerned. The time period for the scheduled inspection of the safety components shall be clearly indicated in the instruction manual. U.K.

2.6.4. Safety components which are incorporated into cableway installations as spare parts shall satisfy the essential requirements of this Regulation and the conditions relating to the smooth interaction with the other parts of the cableway installations. U.K.

2.6.5. Measures shall be taken to ensure that the effects of a fire in the cableway installation do not endanger the safety of persons. U.K.

2.6.6. Special measures shall be taken to protect cableway installations and persons from the effects of lightning. U.K.

2.7. Safety devices U.K.

2.7.1. Any defect in the cableway installation which could result in a failure endangering safety shall, where practicable, be detected, reported and processed by a safety device. The same applies to any normally foreseeable external event which may endanger safety. U.K.

2.7.2. It shall be possible at all times to shut down the cableway installation manually. U.K.

2.7.3. After the cableway installation has been shut down by a safety device, it shall not be possible to restart it unless appropriate action has been taken. U.K.

2.8. Maintainability U.K.

The cableway installation shall be designed and constructed so as to enable routine or special maintenance and repair operations and procedures to be carried out safely.

2.9. Nuisance U.K.

The cableway installation shall be designed and constructed in such a way as to ensure that any internal or external nuisance resulting from noxious gases, noise emissions or vibrations falls within the prescribed limits.

3. Infrastructure requirements U.K.

3.1. Layout, speed, distance between vehicles U.K.

3.1.1. The cableway installation shall be designed to operate safely taking into account the characteristics of the terrain and its surroundings, atmospheric and meteorological conditions, any possible structures and obstacles located in the vicinity either on the ground or in the air in such a way as to cause no nuisance or pose no danger under any operational or servicing conditions or in the event of an operation to rescue persons. U.K.

3.1.2. Sufficient distance shall be maintained laterally and vertically between vehicles, towing devices, tracks, cables, etc., and possible structures and obstacles located in the vicinity either on the ground or in the air, taking account of the vertical, longitudinal and lateral movement of the cables and vehicles or of the towing devices under the most adverse foreseeable operating conditions. U.K.

3.1.3. The maximum distance between vehicles and ground shall take account of the nature of the cableway installation, the type of vehicles and the rescue procedures. In the case of open cars it shall also take account of the risk of fall as well as the psychological aspects associated with the distance between vehicles and ground. U.K.

3.1.4. The maximum speed of the vehicles or towing devices, the minimum distance between them and their acceleration and braking performance shall be chosen to ensure the safety of persons and the safe operation of the cableway installation. U.K.

3.2. Stations and structures along the line U.K.

3.2.1. Stations and structures along the line shall be designed, installed and equipped so as to ensure stability. They shall permit safe guidance of the cables, vehicles and the towing devices, and enable maintenance to be safely carried out, under all operating conditions. U.K.

3.2.2. The entry and exit areas of the cableway installation shall be designed so as to guarantee the safety of the traffic of vehicles, towing devices and persons. The movement of vehicles and towing devices in the stations shall be capable of taking place without risk to persons, taking into account their possible active collaboration to their movement. U.K.

4. Requirements relating to cables, drives and brakes and to mechanical and electrical installations U.K.

4.1. Cables and their supports U.K.

4.1.1. All measures shall be taken in line with the latest technological developments: U.K.

• to avoid cables or their attachments breaking,

• to cover their minimum and maximum stress values,

• to ensure that they are safely mounted on their supports and prevent derailment,

• to enable them to be monitored.

4.1.2. [X1 If it is not possible to prevent all risk of cable derailment, measures shall be taken to ensure that] cables can be retrieved and the cableway installations shut down without risk to persons in the event of derailment. U.K.

Editorial Information

X1 Substituted by Corrigendum to Regulation (EU) 2016/424 of the European Parliament and of the Council of 9 March 2016 on cableway installations and repealing Directive 2000/9/EC (Official Journal of the European Union L 81 of 31 March 2016).

4.2. Mechanical installations U.K.

4.2.1. Drives U.K.

The drive system of a cableway installation shall be of a suitable performance and capability, adapted to the various operating systems and modes.

4.2.2. Standby drive U.K.

The cableway installation shall have a standby drive with an energy supply which is independent of that of the main drive system. A standby drive is not, however, necessary if the safety analysis shows that people can leave the vehicles and, in particular, towing devices easily, quickly and safely even if a standby drive is not available.

4.2.3. Braking U.K.

4.2.3.1. In an emergency, it shall be possible to shut down the cableway installation and/or the vehicles at any moment, under the most unfavourable conditions in terms of authorised load and pulley adhesion during operation. The stopping distance shall be as short as the security of the cableway installation dictates. U.K.

4.2.3.2. Deceleration values shall be within adequate limits fixed in such a way as to ensure both the safety of the persons and the satisfactory behaviour of the vehicles, cables and other parts of the cableway installation. U.K.

4.2.3.3. In all cableway installations there shall be two or more braking systems, each capable of bringing the cableway installation to a halt, and coordinated in such a way that they automatically replace the active system when its efficiency becomes inadequate. The cableway installation's last braking system shall act as close as possible to the traction cable. These provisions do not apply to drag lifts. U.K.

4.2.3.4. The cableway installation shall be fitted with an effective clamp and locking mechanism to guard against premature restarts. U.K.

4.3. Control devices U.K.

The control devices shall be designed and constructed so as to be safe and reliable, to withstand normal operating stresses and external factors such as humidity, extreme temperatures or electromagnetic interference and so as not to cause dangerous situations, even in the event of operational error.

4.4. Communication devices U.K.

Suitable facilities shall be provided to enable operational staff to communicate with one another at all times and to inform passengers in case of emergency.

5. Vehicles and towing devices U.K.

5.1. Vehicles and/or towing devices shall be designed and fitted out in such a way that under foreseeable operating conditions no passenger or operating personnel can fall out or encounter any other risks. U.K.

5.2. The fittings of vehicles and towing devices shall be dimensioned and constructed so as not to: U.K.

• damage the cable, or

• slip, except where slippage does not significantly affect the safety of the vehicle, the towing device or the installation,

under the most unfavourable conditions.

5.3. Vehicle doors (on cars, cabins) shall be designed and constructed in such a way as to make it possible to close and lock them. The vehicle floor and walls shall be designed and constructed so as to withstand pressure and loads exerted by passengers and operating personnel under any circumstances. U.K.

5.4. If, for reasons of operational safety, an operator is required on board the vehicle, the vehicle shall be fitted with the equipment required for him to carry out his tasks. U.K.

5.5. Vehicles and/or towing devices and, in particular, their suspension mechanisms shall be designed and fitted so as to ensure the safety of workers servicing them in accordance with appropriate rules and instructions. U.K.

5.6. In the case of vehicles equipped with disconnectable fittings, all measures shall be taken to bring to a halt, without risk to passengers or operating personnel, at the moment of departure, any vehicle whose fitting has been incorrectly connected to the cable and, at the moment of arrival, any vehicle whose fitting has not been disconnected, and to prevent the vehicle from falling. U.K.

5.7. The installations which have their vehicles running on a fixed track (such as funicular vehicles and multi-rope cable cars) shall be equipped with an automatic braking device on the track, when the possibility of traction cable breaking cannot reasonably be excluded. U.K.

5.8. Where all risk of derailment of the vehicle cannot be eliminated by other measures, the vehicle shall be fitted with an anti-derailment device which enables the vehicle to be brought to a halt without risk to persons. U.K.

6. Equipment for passengers and operating personnel U.K.

The access to embarkation areas and exit from disembarkation areas and the embarkation and disembarkation of passengers and operating personnel shall be organised with regard to the movement and stopping of vehicles in such a way as to ensure the safety of passengers and operating personnel, in particular in areas where there is a risk of falling.

It must be possible for children and persons with reduced mobility to use the cableway installation safely if the cableway installation is designed for the transport of such persons.

7. Operability U.K.

7.1. Safety U.K.

7.1.1. All technical provisions and measures shall be taken to ensure that the cableway installation is used for its intended purpose according to its technical specification and to the specified operating conditions and that the instructions on safe operation and maintenance can be complied with. The instruction manual and the corresponding notes shall be drawn up in [F153 English]. U.K.

Textual Amendments

F153 Word in Annex 2 Point 7.1.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 52; 2020 c. 1, Sch. 5 para. 1(1)

7.1.2. The persons responsible for operating the cableway installation shall be provided with the appropriate material resources and shall be qualified to carry out the task in hand. U.K.

7.2. Safety in the event of immobilisation of the cableway installation U.K.

All technical provisions and measures shall be adopted to ensure that passengers and operating personnel can be brought to safety within a set time appropriate to the type of cableway installation and its surroundings when the cableway installation is immobilised and cannot be restarted quickly.

7.3. Other special provisions concerning safety U.K.

7.3.1. Operators' stands and workplaces U.K.

Movable parts which are normally accessible in the stations shall be designed, constructed and installed in such a way as to preclude any risks or, where such risks exist, be fitted with protective devices so as to prevent any contact with parts of the cableway installation which may cause accidents. Those devices shall be of a type that cannot easily be removed or rendered inoperative.

7.3.2. Risk of falling U.K.

Workplaces and working areas, including those used only occasionally, and the access to them, shall be designed and constructed in such a way as to prevent persons required to work or move in them from falling. Should the construction not be adequate, they shall also be provided with anchorage points for personal protective equipment to prevent falls.

ANNEX III U.K. CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE B: [F154 TYPE] EXAMINATION — PRODUCTION TYPE

Textual Amendments

F154 Word in Annex 3 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(a); 2020 c. 1, Sch. 5 para. 1(1)

1. [F155 Type] examination is the part of a conformity assessment procedure in which [F156 an approved body] examines the technical design of a subsystem or a safety component and verifies and attests that the technical design meets the requirements of this Regulation that apply to it. U.K.

Textual Amendments

F155 Word in Annex 3 Point 1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

F156 Words in Annex 3 Point 1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

2. [F157 Type] examination shall be carried out by assessment of the adequacy of the technical design of the subsystem or the safety component through examination of the technical documentation referred to in point 3, plus examination of a specimen, representative of the production envisaged, of the complete subsystem or safety component (production type). U.K.

Textual Amendments

F157 Word in Annex 3 Point 2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(c); 2020 c. 1, Sch. 5 para. 1(1)

3. The manufacturer shall lodge an application for [F158 type] examination with a [F159 single approved body] of his choice. U.K.

The application shall include:

(a)

the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well;

(b)

a written declaration that the same application has not been lodged with any [F160 other approved body];

(c)

the technical documentation for the subsystem or the safety component according to Annex VIII;

(d)

a representative specimen of the subsystem or the safety component envisaged or details of the premises where it can be examined. [F161 The approved body] may request further specimens if needed for carrying out the test programme.

Textual Amendments

F160 Words in Annex 3 Point 3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(d)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F161 Words in Annex 3 Point 3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(d)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F158 Word in Annex 3 Point 3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(d)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F159 Words in Annex 3 Point 3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(d)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

4. [F162 The approved body] shall: U.K.

4.1.

examine the technical documentation to assess the adequacy of the technical design of the subsystem or the safety component;

4.2.

verify that the specimen(s) have been manufactured in conformity with the technical documentation, and identify the elements that have been designed in accordance with the applicable provisions of the [F163 relevant designated standards], as well as the elements which have been designed in accordance with other relevant technical specifications;

4.3.

carry out appropriate examinations and tests, or have them carried out, to check whether, where the manufacturer has chosen to apply the solutions in the [F164 relevant designated standards], these have been applied correctly;

4.4.

carry out appropriate examinations and tests, or have them carried out, to check whether, where the solutions in the [F165 relevant designated standards] have not been applied, the solutions adopted by the manufacturer applying other relevant technical specifications meet the corresponding essential requirements of this Regulation;

4.5.

agree with the manufacturer on a location where the examinations and tests will be carried out.

Textual Amendments

F163 Words in Annex 3 Point 4.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F164 Words in Annex 3 Point 4.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F165 Words in Annex 3 Point 4.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F162 Words in Annex 3 Point 4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(e)(i); 2020 c. 1, Sch. 5 para. 1(1)

5. [F166 The approved body] shall draw up an evaluation report that records the activities undertaken in accordance with point 4 and their outcomes. Without prejudice to its obligations vis-à-vis [F167 the Secretary of State], [F168 the approved body] shall release the content of that report, in full or in part, only with the agreement of the manufacturer. U.K.

Textual Amendments

F166 Words in Annex 3 Point 5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(f)(i); 2020 c. 1, Sch. 5 para. 1(1)

F167 Words in Annex 3 Point 5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(f)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F168 Words in Annex 3 Point 5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(f)(iii); 2020 c. 1, Sch. 5 para. 1(1)

6. Where the type meets the requirements of this Regulation, [F169 the approved body] shall issue [F170 a type examination] certificate to the manufacturer. The certificate shall contain the name and address of the manufacturer, the conclusions of the examination, any conditions for its validity, the necessary data for identification of the approved type (subsystem or safety component) and if relevant, descriptions of its functioning. The certificate may have one or more annexes attached. U.K.

[F171 The type examination] certificate and its annexes shall contain all relevant information to allow the conformity of manufactured subsystems and safety components with the examined type to be evaluated and to allow for in-service control. It shall also indicate any conditions to which its issue may be subject and be accompanied by the descriptions and drawings necessary for identification of the approved type.

Textual Amendments

F171 Words in Annex 3 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(g)(ii); 2020 c. 1, Sch. 5 para. 1(1)

The certificate shall have a maximum validity period of 30 years from the date of its issue.

Where the type does not satisfy the applicable requirements of this Regulation, [F172 the approved body] shall refuse to issue [F173 a type examination] certificate and shall inform the applicant accordingly, giving detailed reasons for its refusal.

Textual Amendments

F172 Words in Annex 3 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(g)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F173 Words in Annex 3 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(g)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F169 Words in Annex 3 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(g)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F170 Words in Annex 3 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(g)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

7. [F174 The approved body] shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer comply with the applicable requirements of this Regulation and shall determine whether such changes require further investigation. If so, [F175 the approved body] shall inform the manufacturer accordingly. U.K.

The manufacturer shall inform [F176 the approved body] that holds the technical documentation relating to [F177 the type] examination certificate of any modifications to the approved type that may affect the conformity of the subsystem or the safety component with the essential requirements of this Regulation or the conditions for validity of the certificate.

Textual Amendments

F176 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F177 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

[F178 The approved body] shall examine the modification and inform the manufacturer whether [F179 the type examination] certificate remains valid or whether further examinations, verifications or tests are needed. As appropriate, [F180 the approved body] shall issue an addition to [F181 the original type] examination certificate or ask for a new application for [F182 a type] examination to be submitted.

Textual Amendments

F178 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F179 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F180 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(iii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F181 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(iii)(dd); 2020 c. 1, Sch. 5 para. 1(1)

F182 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(iii)(ee); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F174 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F175 Words in Annex 3 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(h)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

8. [F183 Each approved body] shall inform [F184 the Secretary of State] concerning [F185 the type] examination certificates and/or any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to [F184 the Secretary of State] the list of such certificates and/or any additions thereto refused, suspended or otherwise restricted. U.K.

[F186 Each approved body] shall inform [F187 the other approved bodies] concerning [F188 the type examination] certificates and/or any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and/or additions thereto which it has issued.

Textual Amendments

F186 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F187 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F188 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(ii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

The F189 ... [F190 other approved bodies] may, on request, obtain a copy of [F191 the type examination] certificates and/or additions thereto. F192 .... [F193 The approved body] shall keep a copy of [F191 the type examination] certificate, its annexes and additions, as well as the technical file including the documentation submitted by the manufacturer, until the expiry of the validity of that certificate.

Textual Amendments

F189 Words in Annex 3 Point 8 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F190 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F191 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(iii)(ee); 2020 c. 1, Sch. 5 para. 1(1)

F192 Words in Annex 3 Point 8 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(iii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F193 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(iii)(dd); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F183 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F184 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F185 Words in Annex 3 Point 8 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(i)(i)(cc); 2020 c. 1, Sch. 5 para. 1(1)

9. The manufacturer shall keep a copy of [F194 the type] examination certificate, its annexes and additions together with the technical documentation at the disposal of [F195 the Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market. U.K.

Textual Amendments

F194 Words in Annex 3 Point 9 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(j)(i); 2020 c. 1, Sch. 5 para. 1(1)

F195 Words in Annex 3 Point 9 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 53(j)(ii); 2020 c. 1, Sch. 5 para. 1(1)

10. The manufacturer's obligations set out in points 7 and 9, may be fulfilled by his authorised representative, provided that they are specified in the mandate. U.K.

ANNEX IV U.K. CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS

1. Conformity to type based on quality assurance of the production process is the part of a conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2 and 5, and ensures and declares on his sole responsibility that the subsystems or safety components concerned are in conformity with the type described in [F196 the type examination] certificate and satisfy the requirements of this Regulation that apply to them. U.K.

Textual Amendments

F196 Words in Annex 4 Point 1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(a); 2020 c. 1, Sch. 5 para. 1(1)

2. Manufacturing U.K.

The manufacturer shall operate an approved quality system for production, final product inspection and testing of the subsystems or safety components concerned as specified in point 3, and shall be subject to surveillance as specified in point 4.

3. Quality system U.K.

3.1. The manufacturer shall lodge an application for assessment of his quality system with the notified body of his choice. U.K.

The application shall include:

(a)

the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well;

(b)

a written declaration that the same application has not been lodged with any [F197 other approved body];

(c)

all relevant information for the subsystems or safety components approved under module B;

(d)

the documentation concerning the quality system;

(e)

the technical documentation of the approved type and a copy of [F198 the type examination] certificate(s);

(f)

details of the premises where the subsystem or the safety component is manufactured.

Textual Amendments

F197 Words in Annex 4 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F198 Words in Annex 4 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

3.2. The quality system shall ensure that the subsystems or safety components are in conformity with the type(s) described in [F199 the type examination] certificate(s) and comply with the requirements of this Regulation that apply to them. U.K.

All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. The quality system documentation shall permit a consistent interpretation of the quality programmes, plans, manuals and records.

It shall, in particular, contain an adequate description of:

(a)

the quality objectives and the organisational structure, responsibilities and powers of the management with regard to the product quality;

(b)

the corresponding manufacturing, quality control and quality assurance techniques, processes and systematic actions that will be used;

(c)

the examinations and tests that will be carried out before, during and after manufacture, and the frequency with which they will be carried out;

(d)

the quality records, such as inspection reports and test data, calibration data, qualification reports on the personnel concerned, etc.;

(e)

the means of monitoring the achievement of the required product quality and the effective operation of the quality system.

Textual Amendments

F199 Words in Annex 4 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)

3.3. [F200 The approved body] shall assess the quality system to determine whether it satisfies the requirements referred to in point 3.2. U.K.

It shall presume conformity with those requirements in respect of the elements of the quality system that comply with the corresponding specifications of the [F201 relevant designated standard].

Textual Amendments

F201 Words in Annex 4 Point 3.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

The audit shall include an assessment visit to the premises where the subsystems or the safety components are manufactured, inspected and tested.

In addition to experience in quality management systems, the auditing team shall have at least one member with experience of evaluation in the field of cableway installations and in the technology of the subsystems or safety components concerned, and knowledge of the applicable requirements of this Regulation. The audit shall include an assessment visit to the manufacturer's premises. The auditing team shall review the technical documentation referred to in point 3.1(e), to verify the manufacturer's ability to identify the relevant requirements of this Regulation and to carry out the necessary examinations with a view to ensuring compliance of the subsystems or safety components with those requirements.

The decision shall be notified to the manufacturer. The notification shall contain the conclusions of the audit and the reasoned assessment decision.

Textual Amendments

F200 Words in Annex 4 Point 3.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

3.4. The manufacturer shall undertake to fulfil the obligations arising out of the quality system as approved and to maintain it so that it remains adequate and efficient. U.K.

3.5. The manufacturer shall keep [F202 the approved body] that has approved the quality system informed of any intended change to the quality system. U.K.

[F203 The approved body] shall evaluate any proposed changes and decide whether the modified quality system will continue to satisfy the requirements referred to in point 3.2 or whether a reassessment is necessary.

Textual Amendments

F203 Words in Annex 4 Point 3.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(iv)(bb); 2020 c. 1, Sch. 5 para. 1(1)

It shall notify the manufacturer of the outcome of the evaluation. In case of a reassessment, it shall notify the manufacturer of its decision. The notification shall contain the conclusions of the examination and the reasoned assessment decision.

Textual Amendments

F202 Words in Annex 4 Point 3.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(b)(iv)(aa); 2020 c. 1, Sch. 5 para. 1(1)

4. Surveillance under the responsibility of [F204 the approved body] U.K.

4.1. The purpose of surveillance is to make sure that the manufacturer duly fulfils the obligations arising out of the approved quality system. U.K.

4.2. The manufacturer shall, for assessment purposes, allow [F205 the approved body] access to the manufacture, inspection, testing and storage sites, and shall provide it with all necessary information, in particular: U.K.

(a)

the quality system documentation;

(b)

the quality records, such as inspection reports and test data, calibration data, qualification reports on the personnel concerned, etc.

Textual Amendments

F205 Words in Annex 4 Point 4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)

4.3. [F206 The approved body] shall carry out periodic audits of at least once every two years to make sure that the manufacturer maintains and applies the quality system and shall provide the manufacturer with an audit report. U.K.

Textual Amendments

F206 Words in Annex 4 Point 4.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(c)(iii); 2020 c. 1, Sch. 5 para. 1(1)

4.4. In addition, [F207 the approved body] may pay unexpected visits to the manufacturer. During such visits [F207 the approved body] may, if necessary, carry out product tests, or have them carried out, in order to verify that the quality system is functioning correctly. [F208 The approved body] shall provide the manufacturer with a visit report and, if tests have been carried out, with a test report. U.K.

Textual Amendments

F207 Words in Annex 4 Point 4.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(c)(iv)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F208 Words in Annex 4 Point 4.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(c)(iv)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F204 Words in Annex 4 Point 4 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(c)(i); 2020 c. 1, Sch. 5 para. 1(1)

5. [F209 CE marking and EU declaration] of conformity U.K.

5.1. The manufacturer shall affix the [F210 UK marking] and, under the responsibility of [F211 the approved body] referred to in point 3.1, the latter's identification number to each individual subsystem or safety component that is in conformity with the type described in [F212 the type examination] certificate and satisfies the applicable requirements of this Regulation. U.K.

Textual Amendments

F210 Words in Annex 4 Point 5.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(d)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F211 Words in Annex 4 Point 5.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(d)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F212 Words in Annex 4 Point 5.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(d)(ii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

5.2. The manufacturer shall draw up a written [F213 declaration of conformity] for each subsystem or safety component model and keep it at the disposal of the [F214 Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market. The [F213 declaration of conformity] shall identify the subsystem or safety component model for which it has been drawn up. U.K.

A copy of the [F213 declaration of conformity] shall be made available to the relevant authorities upon request.

Textual Amendments

F213 Words in Annex 4 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(d)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F214 Words in Annex 4 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(d)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F209 Words in Annex 4 Point 5 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(d)(i); 2020 c. 1, Sch. 5 para. 1(1)

6. The manufacturer shall, for a period of 30 years after the subsystem or safety component has been placed on the market, keep at the disposal of the [F215 Secretary of State]: U.K.

Textual Amendments

F215 Words in Annex 4 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(e)(i); 2020 c. 1, Sch. 5 para. 1(1)

(a)

the documentation referred to in point 3.1;

(b)

the information relating to the change referred to in point 3.5, as approved;

(c)

the decisions and reports of the [F216 approved body] referred to in points 3.5, 4.3 and 4.4.

Textual Amendments

F216 Words in Annex 4 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)

7. [F217 Each approved body] shall inform [F218 the Secretary of State] of quality system approvals issued or withdrawn, and shall, periodically or upon request, make available to [F218 the Secretary of State] the list of quality system approvals refused, suspended or otherwise restricted. U.K.

Textual Amendments

F217 Words in Annex 4 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(f)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F218 Words in Annex 4 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(f)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

[F219 Each approved body] shall inform [F220 the other approved bodies] of quality system approvals which it has refused, suspended, withdrawn or otherwise restricted, giving the reasons for its decision, and, upon request, of quality system approvals which it has issued.

Textual Amendments

F219 Words in Annex 4 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(f)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F220 Words in Annex 4 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(f)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F221 ...

Textual Amendments

F221 Words in Annex 4 Point 7 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(f)(iii); 2020 c. 1, Sch. 5 para. 1(1)

[F222 The approved body] shall keep a copy of each approval decision issued and its annexes and additions.

Textual Amendments

F222 Words in Annex 4 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 54(f)(iv); 2020 c. 1, Sch. 5 para. 1(1)

8. Authorised representative U.K.

The manufacturer's obligations set out in points 3.1, 3.5, 5 and 6 may be fulfilled by his authorised representative, on his behalf and under his responsibility, provided that they are specified in the mandate.

ANNEX V U.K. CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE F: CONFORMITY TO TYPE BASED ON SUBSYSTEM OR SAFETY COMPONENT VERIFICATION

1. Conformity to type based on subsystem or safety component verification is the part of a conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2, 5.1 and 6, and ensures and declares on his sole responsibility that the subsystems or safety components concerned, which have been subject to the provisions of point 3, are in conformity with the type described in [F223 the type] examination certificate and satisfy the requirements of this Regulation that apply to them. U.K.

Textual Amendments

F223 Words in Annex 5 Point 1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(a); 2020 c. 1, Sch. 5 para. 1(1)

2. Manufacturing U.K.

The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured subsystems or safety components with the approved type described in [F224 the type] examination certificate and with the requirements of this Regulation that apply to them.

Textual Amendments

F224 Words in Annex 5 Point 2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(b); 2020 c. 1, Sch. 5 para. 1(1)

3. Verification U.K.

3.1. The manufacturer shall lodge an application for subsystem or safety component verification with [F225 the approved body] of his choice. U.K.

The application shall include:

(a)

the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well;

(b)

a written declaration that the same application has not been lodged with any [F226 other approved body];

(c)

all relevant information for the subsystems or safety components approved under module B;

(d)

the technical documentation of the approved type and a copy of the [F227 type examination] certificate(s);

(e)

details of the premises where the subsystem or the safety component can be examined.

Textual Amendments

F226 Words in Annex 5 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(c)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F227 Words in Annex 5 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(c)(i)(cc); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F225 Words in Annex 5 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(c)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

3.2. [F228 The approved body] shall carry out appropriate examinations and tests, or have them carried out, in order to check the conformity of the subsystems or safety components with the approved type described in the [F229 type examination] certificate and with the appropriate requirements of this Regulation. U.K.

The examinations and tests to check the conformity of the subsystems or safety components with the appropriate requirements shall be carried out, at the choice of the manufacturer, either by examination and testing of every subsystem or safety component as specified in point 4 or by examination and testing of the subsystems or safety components on a statistical basis as specified in point 5.

Textual Amendments

F228 Words in Annex 5 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(c)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F229 Words in Annex 5 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(c)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

4. Verification of conformity by examination and testing of every subsystem or safety component U.K.

4.1. All subsystems or safety components shall be individually examined and appropriate tests set out in the [F230 relevant designated standards], shall be carried out in order to verify conformity with the approved type described in the [F231 type examination] certificate and with the appropriate requirements of this Regulation. U.K.

In the absence of such [F232 a designated standard, the approved] body concerned shall decide on the appropriate tests to be carried out.

Textual Amendments

F232 Words in Annex 5 Point 4.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(d)(ii); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F230 Words in Annex 5 Point 4.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(d)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F231 Words in Annex 5 Point 4.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(d)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

4.2. [F233 The approved body] shall issue a certificate of conformity in respect of the examinations and tests carried out, and shall affix its identification number to each approved subsystem or safety component or have it affixed under its responsibility. U.K.

The manufacturer shall keep the certificates of conformity available for inspection by the [F234 Secretary of State] for 30 years after the subsystem or safety component has been placed on the market.

Textual Amendments

F234 Words in Annex 5 Point 4.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(d)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F233 Words in Annex 5 Point 4.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(d)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

5. Statistical verification of conformity U.K.

5.1. The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure the homogeneity of each lot produced, and shall present his subsystem or safety component for verification in the form of homogeneous lots. U.K.

5.2. A random sample shall be taken from each lot. All the subsystems or safety components in the sample shall be individually examined and appropriate tests set out in the [F235 relevant designated standards] and/or equivalent tests set out in other relevant technical specifications, shall be carried out in order to verify their conformity with the approved type described in the [F236 type examination] certificate and with the applicable requirements of this Regulation and to determine whether the lot is accepted or rejected. In the absence of such a [F237 designated standard], the [F238 approved body] concerned shall decide on the appropriate tests to be carried out. U.K.

Textual Amendments

F235 Words in Annex 5 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F236 Words in Annex 5 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F237 Words in Annex 5 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(i)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F238 Words in Annex 5 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(i)(dd); 2020 c. 1, Sch. 5 para. 1(1)

5.3. If a lot is accepted, all the subsystems or safety components of the lot shall be considered approved, except for those subsystems or safety components from the sample that have been found not to satisfy the tests. U.K.

[F239 The approved body] shall issue a certificate of conformity in respect to the examinations and tests carried out, and shall affix its identification number to each approved subsystem or safety component or have it affixed under its responsibility.

Textual Amendments

F239 Words in Annex 5 Point 5.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

The manufacturer shall keep the certificates of conformity at the disposal of the [F240 Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market.

Textual Amendments

F240 Words in Annex 5 Point 5.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

5.4. If a lot is rejected, the [F241 approved body] or the [F242 Secretary of State] shall take appropriate measures to prevent the placing on the market of that lot. In the event of the frequent rejection of lots, the [F241 approved body] may suspend the statistical verification and take appropriate measures. U.K.

Textual Amendments

F241 Words in Annex 5 Point 5.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F242 Words in Annex 5 Point 5.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(e)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

6. [F243 UK marking and declaration] of conformity U.K.

6.1. The manufacturer shall affix the [F244 UK marking] and, under the responsibility of the [F245 approved body] referred to in point 3, the latter's identification number to each individual subsystem or safety component that is in conformity with the approved type described in [F246 the type examination] certificate and satisfies the applicable requirements of this Regulation. U.K.

Textual Amendments

F244 Words in Annex 5 Point 6.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F245 Words in Annex 5 Point 6.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F246 Words in Annex 5 Point 6.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(ii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

6.2. The manufacturer shall draw up a written [F247 declaration] of conformity for each subsystem or safety component model and keep it at the disposal of the [F248 Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market. The [F247 declaration] of conformity shall identify the subsystem or safety component model for which it has been drawn up. U.K.

[F249 If the approved body] referred to in point 3 agrees and under its responsibility, the manufacturer may also affix the [F250 approved body's] identification number to the subsystems or safety components.

Textual Amendments

F249 Words in Annex 5 Point 6.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(iii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F250 Words in Annex 5 Point 6.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(iii)(dd); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F247 Word in Annex 5 Point 6.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F248 Words in Annex 5 Point 6.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F243 Words in Annex 5 Point 6 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(f)(i); 2020 c. 1, Sch. 5 para. 1(1)

7. [F251 If the approved body] agrees and under its responsibility, the manufacturer may affix the [F252 approved body's] identification number to the subsystems or safety components during the manufacturing process. U.K.

Textual Amendments

F251 Words in Annex 5 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(g)(i); 2020 c. 1, Sch. 5 para. 1(1)

F252 Words in Annex 5 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 55(g)(ii); 2020 c. 1, Sch. 5 para. 1(1)

8. Authorised representative U.K.

The manufacturer's obligations may be fulfilled by his authorised representative, on his behalf and under his responsibility, provided that they are specified in the mandate. An authorised representative may not fulfil the obligations set out in points 2 and 5.1.

ANNEX VI U.K. CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE G: CONFORMITY BASED ON UNIT VERIFICATION

1. Conformity based on unit verification is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2, 3.1 and 4, and ensures and declares on his sole responsibility that the subsystem or safety component concerned, which has been subject to the provisions of point 3, is in conformity with the requirements of this Regulation that apply to it. U.K.

2. Manufacturing U.K.

The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured subsystem or safety component with the applicable requirements of this Regulation.

3. Verification U.K.

3.1. The manufacturer shall lodge an application for unit verification of a subsystem or a safety component with [F253 the approved body] of his choice. U.K.

The application shall include:

(a)

the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well;

(b)

a written declaration that the same application has not been lodged with any [F254 other approved body];

(c)

the technical documentation for the subsystem or the safety component according to Annex VIII;

(d)

details of the premises where the subsystem or the safety component can be examined.

Textual Amendments

F254 Words in Annex 6 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F253 Words in Annex 6 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

3.2. [F255 The approved body] shall examine the technical documentation for the subsystem or the safety component and shall carry out the appropriate examinations and tests set out in the [F256 relevant designated standards], to check the conformity of the subsystem or the safety component with the applicable requirements of this Regulation, or have them carried out. In the absence of such [F257 a designated standard] [F258 the approved body] concerned shall decide on the appropriate tests to be carried out. U.K.

[F255 The approved body] shall issue a certificate of conformity in respect of the examinations and tests carried out and shall affix its identification number to the approved subsystem or safety component, or have it affixed under its responsibility.

If [F258 the approved body] refuses to issue a certificate of conformity, it shall state in detail the reasons for the refusal and indicate the necessary corrective measures to be taken.

When the manufacturer reapplies for unit verification of the subsystem or the safety component concerned, he shall apply to the [F259 same approved body].

Textual Amendments

F259 Words in Annex 6 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(ee); 2020 c. 1, Sch. 5 para. 1(1)

F260 ....

Textual Amendments

F260 Words in Annex 6 Point 3.2 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(ff); 2020 c. 1, Sch. 5 para. 1(1)

The manufacturer shall keep the technical documentation and the certificate of conformity at the disposal of the [F261 Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market.

Textual Amendments

F261 Words in Annex 6 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(gg); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F255 Words in Annex 6 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F256 Words in Annex 6 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F257 Words in Annex 6 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F258 Words in Annex 6 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(a)(ii)(dd); 2020 c. 1, Sch. 5 para. 1(1)

4. [F262 UK marking and declaration] of conformity U.K.

4.1. The manufacturer shall affix the [F263 UK marking] and, under the responsibility of the [F264 approved body] referred to in point 3, the latter's identification number to each subsystem or safety component that satisfies the applicable requirements of this Regulation. U.K.

Textual Amendments

F263 Words in Annex 6 Point 4.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(b)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F264 Words in Annex 6 Point 4.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(b)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

4.2. The manufacturer shall draw up a written [F265 declaration] of conformity and keep it at the disposal of the [F266 Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market. The [F265 declaration] of conformity shall identify the subsystem or the safety component for which it has been drawn up. U.K.

F267 ...

Textual Amendments

F267 Words in Annex 6 Point 4.2 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(b)(iii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F265 Word in Annex 6 Point 4.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(b)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F266 Words in Annex 6 Point 4.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(b)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F262 Words in Annex 6 Point 4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 56(b)(i); 2020 c. 1, Sch. 5 para. 1(1)

5. Authorised representative U.K.

The manufacturer's obligations set out in points 3.1 and 4 may be fulfilled by his authorised representative, on his behalf and under his responsibility, provided that they are specified in the mandate.

ANNEX VII U.K. CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE H 1: CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION

1. Conformity based on full quality assurance plus design examination is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2 and 5, and ensures and declares on his sole responsibility that the subsystems or safety components concerned satisfy the requirements of this Regulation that apply to them. U.K.

2. Manufacturing U.K.

The manufacturer shall operate an approved quality system for the design, manufacture and final inspection and testing of subsystems or safety components as specified in point 3 and shall be subject to surveillance as specified in point 4. The adequacy of the technical design of the subsystems or safety components shall have been examined in accordance with point 3.6.

3. Quality system U.K.

3.1. The manufacturer shall lodge an application for assessment of his quality system with the [F268 approved body] of his choice, for the subsystems or safety components concerned. U.K.

Textual Amendments

F268 Words in Annex 7 Point 3.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(a); 2020 c. 1, Sch. 5 para. 1(1)

The application shall include:

(a)

the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well;

(b)

all necessary information on the subsystems or safety components to be manufactured;

(c)

the technical documentation in accordance with Annex VIII for one representative type of each category of subsystem or safety component to be manufactured;

(d)

the documentation concerning the quality system;

(e)

the address of the premises where the subsystems or safety components are designed, manufactured, inspected and tested;

(f)

a written declaration that the same application has not been lodged with any other [F268 approved body].

3.2. The quality system shall ensure compliance of the subsystems or the safety components with the requirements of this Regulation that apply to them. U.K.

All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. The quality system documentation shall permit a consistent interpretation of the quality programmes, plans, manuals and records.

It shall, in particular, contain an adequate description of:

(a)

the quality objectives and the organisational structure, responsibilities and powers of the management with regard to the design and product quality;

(b)

the technical design specifications, including standards, that will be applied and, where the relevant [F269 designated standards] will not be applied in full, the means, including other relevant technical specifications, that will be used to ensure that the essential requirements of this Regulation will be met;

(c)

the design control and design verification techniques, processes and systematic actions that will be used when designing the subsystems or the safety components;

(d)

the corresponding manufacturing, quality control and quality assurance techniques, processes and systematic actions that will be used;

(e)

the examinations and tests to be carried out before, during and after manufacture, and the frequency with which they will be carried out;

(f)

the quality records, such as inspection reports and test data, calibration data, qualification reports on the personnel concerned, etc.;

(g)

the means of monitoring the achievement of the required design and product quality and the effective operation of the quality system.

Textual Amendments

F269 Words in Annex 7 Point 3.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(b); 2020 c. 1, Sch. 5 para. 1(1)

3.3. [F270 The approved body] shall assess the quality system to determine whether it satisfies the requirements referred to in point 3.2. It shall presume conformity with those requirements in respect of the elements of the quality system that comply with the corresponding specifications of the relevant [F271 designated standard]. U.K.

Textual Amendments

F270 Words in Annex 7 Point 3.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(c)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F271 Words in Annex 7 Point 3.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(c)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

The audit shall include an assessment visit to the premises where the subsystems or the safety components are designed, manufactured, inspected and tested.

In addition to experience in quality management systems, the auditing team shall have at least one member experienced as assessor in the field of cableway installations and in the technology of the subsystems or safety components concerned, and knowledge of the applicable requirements of this Regulation.

The auditing team shall review the technical documentation referred to in point 3.1 to verify the manufacturer's ability to identify the applicable requirements of this Regulation and to carry out the necessary examinations with a view to ensuring compliance of the subsystems or the safety components with those requirements.

[F272 The approved body] shall notify its decision to the manufacturer or his authorised representative. The notification shall contain the conclusions of the audit and the reasoned assessment decision.

Textual Amendments

F272 Words in Annex 7 Point 3.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)

3.4. The manufacturer shall undertake to fulfil the obligations arising out of the quality system as approved and to maintain it so that it remains adequate and efficient. U.K.

3.5. The manufacturer shall keep [F273 the approved body] that has approved the quality system informed of any intended change to the quality system. U.K.

Textual Amendments

F273 Words in Annex 7 Point 3.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(d)(i); 2020 c. 1, Sch. 5 para. 1(1)

[F274 The approved body] shall evaluate any proposed changes and decide whether the modified quality system will continue to satisfy the requirements referred to in point 3.2 or whether a reassessment is necessary.

Textual Amendments

F274 Words in Annex 7 Point 3.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(d)(ii); 2020 c. 1, Sch. 5 para. 1(1)

It shall notify the manufacturer or the authorised representative of its decision. The notification shall contain the conclusions of the assessment and the reasoned assessment decision.

3.6. Design examination U.K.

3.6.1. The manufacturer shall lodge an application for examination of the design with the [F275 approved body] referred to in point 3.1. U.K.

Textual Amendments

F275 Words in Annex 7 Point 3.6.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(e); 2020 c. 1, Sch. 5 para. 1(1)

3.6.2. The application shall make it possible to understand the design, manufacture and operation of the subsystem or safety component, and to assess the conformity with the requirements of this Regulation that apply to it. U.K.

It shall include:

(a)

the name and address of the manufacturer;

(b)

a written declaration that the same application has not been lodged with any [F276 other approved body];

(c)

the technical documentation as described in Annex VIII.

Textual Amendments

F276 Words in Annex 7 Point 3.6.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(f); 2020 c. 1, Sch. 5 para. 1(1)

3.6.3. [F277 The approved body] shall examine the application and, where the design meets the requirements of this Regulation that apply to the subsystem or safety component, it shall issue [F278 a design examination] certificate to the manufacturer. That certificate shall give the name and address of the manufacturer, the conclusions of the examination, the conditions (if any) for its validity and the data necessary for identification of the approved design. That certificate may have one or more annexes attached. U.K.

That certificate and its annexes shall contain all relevant information to allow the conformity of manufactured subsystems or safety components with the examined design to be evaluated and to allow for in-service control, where applicable.

Where the design does not satisfy the applicable requirements of this Regulation, [F279 the approved body] shall refuse to issue [F280 a design examination] certificate and shall inform the applicant accordingly, giving detailed reasons for its refusal.

Textual Amendments

F279 Words in Annex 7 Point 3.6.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(g)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F280 Words in Annex 7 Point 3.6.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(g)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F277 Words in Annex 7 Point 3.6.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(g)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F278 Words in Annex 7 Point 3.6.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(g)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

3.6.4. [F281 The approved body] shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved design may no longer comply with the applicable requirements of this Regulation, and shall determine whether such changes require further investigation. If so, [F282 the approved body] shall inform the manufacturer accordingly. U.K.

The manufacturer shall keep [F283 the approved body] that has issued the [F284 design examination] certificate informed of any modification to the approved design that may affect the conformity with the essential requirements of this Regulation or the conditions for validity of the certificate. Such modifications shall require additional approval from [F283 the approved body] that issued the [F284 design examination] certificate in the form of an addition to the original [F284 design examination] certificate.

Textual Amendments

F283 Words in Annex 7 Point 3.6.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(h)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F284 Words in Annex 7 Point 3.6.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(h)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F281 Words in Annex 7 Point 3.6.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(h)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F282 Words in Annex 7 Point 3.6.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(h)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

3.6.5. [F285 Each approved body] shall inform [F286 the Secretary of State] of [F287 the design examination] certificates and/or any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to [F286 the Secretary of State] the list of certificates and/or any additions thereto refused, suspended or otherwise restricted. U.K.

[F288 Each approved body] shall inform the [F289 other approved bodies] of [F290 the design examination] certificates and/or any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, of the certificates and/or additions thereto which it has issued.

Textual Amendments

F288 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F289 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F290 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(ii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

[F291 The other approved bodies may, on request, obtain a copy of the design examination certificates and any additions thereto.]

Textual Amendments

F291 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(iii); 2020 c. 1, Sch. 5 para. 1(1)

[F292 The approved body] shall keep a copy of [F293 the design examination] certificate, its annexes and additions, as well as the technical file including the documentation submitted by the manufacturer until the expiry of the validity of the certificate.

Textual Amendments

F292 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(iv)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F293 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(iv)(bb); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F285 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F286 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F287 Words in Annex 7 Point 3.6.5 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(i)(i)(cc); 2020 c. 1, Sch. 5 para. 1(1)

3.6.6. The manufacturer shall keep a copy of [F294 the design examination] certificate, its annexes and additions together with the technical documentation at the disposal of the [F295 Secretary of State] for 30 years after the subsystem or safety component has been placed on the market. U.K.

Textual Amendments

F294 Words in Annex 7 Point 3.6.6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(j)(i); 2020 c. 1, Sch. 5 para. 1(1)

F295 Words in Annex 7 Point 3.6.6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(j)(ii); 2020 c. 1, Sch. 5 para. 1(1)

4. Surveillance under the responsibility of [F296 the approved body] U.K.

4.1. The purpose of surveillance is to make sure that the manufacturer duly fulfils the obligations arising out of the approved quality system. U.K.

4.2. The manufacturer shall, for assessment purposes, allow [F297 the approved body] access to the design, manufacture, inspection, testing and storage sites, and shall provide it with all necessary information, in particular: U.K.

Textual Amendments

F297 Words in Annex 7 Point 4.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(k)(ii); 2020 c. 1, Sch. 5 para. 1(1)

(a)

the quality system documentation;

(b)

the quality records provided for by the design part of the quality system, such as results of analyses, calculations, tests, etc.;

(c)

the quality records as provided for by the manufacturing part of the quality system, such as inspection reports and test data, calibration data, qualification reports on the personnel concerned, etc.

4.3. [F298 The approved body] shall carry out periodic audits to make sure that the manufacturer maintains and applies the quality system and shall provide the manufacturer with an audit report. The frequency of periodic audits shall be such that a full reassessment is carried out every three years. U.K.

Textual Amendments

F298 Words in Annex 7 Point 4.3 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(k)(iii); 2020 c. 1, Sch. 5 para. 1(1)

4.4. In addition, [F299 the approved body] may pay unexpected visits to the manufacturer. U.K.

Textual Amendments

F299 Words in Annex 7 Point 4.4 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(k)(iv); 2020 c. 1, Sch. 5 para. 1(1)

During such visits, [F299 the approved body] may, if necessary, carry out product tests, or have them carried out, in order to check the proper functioning of the quality system. It shall provide the manufacturer with a visit report and, if tests have been carried out, with a test report.

Textual Amendments

F296 Words in Annex 7 Point 4 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(k)(i); 2020 c. 1, Sch. 5 para. 1(1)

5. [F300 UK marking and declaration] of conformity. U.K.

5.1. The manufacturer shall affix the [F301 UK marking] and, under the responsibility of [F302 the approved body] referred to in point 3.1, the latter's identification number to each individual subsystem or safety component that satisfies the applicable requirements of this Regulation. U.K.

Textual Amendments

F301 Words in Annex 7 Point 5.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F302 Words in Annex 7 Point 5.1 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

5.2. The manufacturer shall draw up a [F303 written declaration] of conformity for each subsystem or safety component model and keep it at the disposal of the [F304 Secretary of State] for 30 years after the subsystem or the safety component has been placed on the market. [F305 The declaration] of conformity shall identify the subsystem or the safety component model for which it has been drawn up and shall refer to the number of [F306 the design examination] certificate. U.K.

Textual Amendments

F303 Words in Annex 7 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(iii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F304 Words in Annex 7 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(iii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F305 Words in Annex 7 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(iii)(cc); 2020 c. 1, Sch. 5 para. 1(1)

F306 Words in Annex 7 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(iii)(dd); 2020 c. 1, Sch. 5 para. 1(1)

[F307 A copy of the declaration of conformity must be made available to the Executive upon request.]

Textual Amendments

F307 Words in Annex 7 Point 5.2 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(iii)(ee); 2020 c. 1, Sch. 5 para. 1(1)

Textual Amendments

F300 Words in Annex 7 Point 5 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(l)(i); 2020 c. 1, Sch. 5 para. 1(1)

6. The manufacturer shall, for a period of 30 years after the subsystem or safety component has been placed on the market, keep at the disposal of the [F308 Secretary of State]: U.K.

Textual Amendments

F308 Words in Annex 7 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(m)(i); 2020 c. 1, Sch. 5 para. 1(1)

(a)

the technical documentation referred to in point 3.1(c);

(b)

the documentation concerning the quality system referred to in point 3.1(d);

(c)

the information relating to the change referred to in point 3.5 as approved;

(d)

the decisions and reports of [F309 the approved body] referred to in points 3.3, 3.5, 4.3 and 4.4.

Textual Amendments

F309 Words in Annex 7 Point 6(d) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(m)(ii); 2020 c. 1, Sch. 5 para. 1(1)

7. [F310 Each approved body] shall inform [F311 the Secretary of State] of quality system approvals issued or withdrawn, and shall, periodically or upon request, make available to [F311 the Secretary of State] the list of quality system approvals refused, suspended or otherwise restricted. U.K.

Textual Amendments

F310 Words in Annex 7 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(n)(i)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F311 Words in Annex 7 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(n)(i)(bb); 2020 c. 1, Sch. 5 para. 1(1)

[F312 Each approved body] shall inform the [F313 other approved bodies] of quality system approvals which it has refused, suspended or withdrawn and, upon request, of quality system approvals which it has issued.

Textual Amendments

F312 Words in Annex 7 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(n)(ii)(aa); 2020 c. 1, Sch. 5 para. 1(1)

F313 Words in Annex 7 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(n)(ii)(bb); 2020 c. 1, Sch. 5 para. 1(1)

F314 ...

Textual Amendments

F314 Words in Annex 7 Point 7 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(n)(iii); 2020 c. 1, Sch. 5 para. 1(1)

[F315 The approved body] shall keep a copy of the quality system approval decision(s) issued, its annexes and additions, as well as the technical file, for a period of 30 years from the date of their issue.

Textual Amendments

F315 Words in Annex 7 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 57(n)(iv); 2020 c. 1, Sch. 5 para. 1(1)

8. Authorised representative U.K.

The manufacturer's obligations set out in points 3.1, 3.6.4, 3.6.6, 5 and 6 may be fulfilled by his authorised representative, on his behalf and under his responsibility, provided that they are specified in the mandate.

ANNEX VIII U.K. TECHNICAL DOCUMENTATION FOR SUBSYSTEMS AND SAFETY COMPONENTS

1. The technical documentation shall make it possible to assess the conformity of the subsystem or the safety component with the applicable requirements of this Regulation and shall include an adequate analysis and assessment of the risks. The technical documentation shall specify the applicable requirements and cover, as far as relevant for the conformity assessment, the design, manufacture and operation of the subsystem or safety component. U.K.

2. The technical documentation shall contain, at least the following elements: U.K.

(a)

a general description of the subsystem or the safety component;

(b)

design and manufacturing drawings and diagrams of components, subassemblies, circuits, etc. and the descriptions and explanations necessary for the understanding of those drawings and diagrams and of the operation of the subsystem or safety component;

(c)

[F316 a list of the designated standards referred to in Article 17 applied in full or in part, and where those designated standards have not been applied, descriptions of the solutions adopted to meet the essential requirements of this Regulation including a list of other relevant technical specifications applied. In the event of partly applied designated standards, the technical documentation must specify the parts which have been applied;]

(d)

the supporting evidence for the adequacy of the design, including the results of any design calculations, examinations or tests carried out by or for the manufacturer and the related reports;

(e)

a copy of the instructions for the subsystem or the safety component;

(f)

for subsystems, copies of the [F317 declarations] of conformity for the safety components incorporated into the subsystem.

Textual Amendments

F316 Annex 8 Point 2(c) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 58(a); 2020 c. 1, Sch. 5 para. 1(1)

F317 Word in Annex 8 Point 2(f) substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 58(b); 2020 c. 1, Sch. 5 para. 1(1)

ANNEX IX U.K. [F318 DECLARATION] OF CONFORMITY FOR SUBSYSTEMS AND SAFETY COMPONENTS No …(10)

Textual Amendments

F318 Word in Annex 9 heading substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 59(a); 2020 c. 1, Sch. 5 para. 1(1)

1.

Subsystem/safety component or subsystem/safety component model (product, type, batch, or serial number):

2.

Name and address of the manufacturer and, where applicable, his authorised representative:

3.

This declaration of conformity is issued under the sole responsibility of the manufacturer.

4.

Object of the declaration (identification of the subsystem or safety component allowing traceability. It may, where necessary for the identification of the subsystem or safety component, include an image):

• description of the subsystem or safety component,

• all relevant provisions with which the safety component must comply and, in particular, the conditions of use.

5.

F319 ...

6.

References to the [F320 relevant designated standards] used or references to the other technical specifications in relation to which conformity is declared:

7.

The [F321 approved body] … (name, address, number) … performed … (description of intervention) … and issued the certificate(s): … (details, including its date, and where appropriate, information on the duration and conditions of its validity).

8.

Additional information:

Signed for and on behalf of: …

(place and date of issue):

(name, function) (signature):

Textual Amendments

F319 Annex 9 Point 5 omitted (31.12.2020) by virtue of The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 59(b); 2020 c. 1, Sch. 5 para. 1(1)

F320 Words in Annex 9 Point 6 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 59(c); 2020 c. 1, Sch. 5 para. 1(1)

F321 Words in Annex 9 Point 7 substituted (31.12.2020) by The Cableway Installations (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1347), regs. 1, 59(d); 2020 c. 1, Sch. 5 para. 1(1)

ANNEX X U.K. CORRELATION TABLE

Directive 2000/9/EC	This Regulation
—	Article 1
Article 1(1)	Article 2(1)
Article 1(2)	Article 3, point 1
Article 1(3)	Article 3, points 7 to 9
Article 1(4) first subparagraph	Article 2(1)
Article 1(4) second subparagraph	—
Article 1(4) third subparagraph	Article 9(3)
Article 1(5)	Article 3, points 1, 3 to 6
Article 1(6)	Article 2(2)
Article 2	—
Article 3(1)	Article 6
Article 3(2)	Article 17
—	Article 3, points 10 to 27
Article 4	Article 8
Article 5(1)	Article 4 and Article 5(1)
Article 5(2)	Article 5(4)
Article 6	Article 7
Article 7(1) to (3)	Articles 18 to 21
Article 7(4)	Article 19(3)
Article 8	Article 4
Article 9	Article 7
Article 10	Articles 18 to 21
Article 11(1)	Article 9(1)
Article 11(2)	Article 9(4)
Article 11(3)	—
Article 11(4)	Article 5(1)
Article 11(5)	Article 7
Article 11(6) and (7)	Article 9(2)
—	Articles 11 to 16
Article 12	Article 9(4)
Article 13	Article 10(1)
Article 14	Articles 39 to 43
Article 15	Article 10(2)
Article 16	Articles 22 to 38
Article 17	Article 44
Article 18	Articles 20 and 21
Article 19	—
Article 20	—
Article 21(3)	Article 46
Article 22	Article 48
—	Article 45
—	Article 47
Annex I	Annex I
Annex II	Annex II
Annex III	Article 8
Annex IV	Annex IX
Annex V	Annexes III to VII
Annex VI	Annex IX
Annex VII	Annexes III to VII
Annex VIII	Article 26
Annex IX	Article 20
—	Annex VIII

(1)

OJ C 451, 16.12.2014, p. 81.

(2)

Position of the European Parliament of 20 January 2016 (not yet published in the Official Journal) and decision of the Council of 12 February 2016.

(3)

Directive 2000/9/EC of the European Parliament and of the Council of 20 March 2000 relating to cableway installations designed to carry persons (OJ L 106, 3.5.2000, p. 21).

(4)

OJ C 136, 4.6.1985, p. 1.

(5)

Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European Standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (OJ L 316, 14.11.2012, p. 12).

(6)

Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products and repealing Council Decision 93/465/EEC (OJ L 218, 13.8.2008, p. 82).

(7)

Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 (OJ L 218, 13.8.2008, p. 30).

(8)

Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts (OJ L 96, 29.3.2014, p. 251).

(9)

Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission's exercise of implementing powers (OJ L 55, 28.2.2011, p. 13).

(10)

It is optional for the manufacturer to assign a number to the declaration of conformity.