ANNEX IX U.K.F1 ... DECLARATION OF CONFORMITY No …(1)

Textual Amendments

F1 Word in Annex 9 heading omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(52)(a); 2020 c. 1, Sch. 5 para. 1(1)

1. PPE (product, type, batch or serial number): U.K.

2. Name and address of the manufacturer and, where applicable, his authorised representative: U.K.

3. This declaration of conformity is issued under the sole responsibility of the manufacturer: U.K.

4. Object of the declaration (identification of PPE allowing traceability; where necessary for the identification of the PPE, a colour image of sufficient clarity may be included): U.K.

5. The object of the declaration described in point 4 is in conformity with the relevant [F2 statutory requirements]: … U.K.

Textual Amendments

F2 Words in Annex 9 para. 5 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(52)(b); 2020 c. 1, Sch. 5 para. 1(1)

6. References to the relevant [F3 designated] standards used, including the date of the standard, or references to the other technical specifications, including the date of the specification, in relation to which conformity is declared: U.K.

Textual Amendments

F3 Word in Annex 9 para. 6 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(52)(c); 2020 c. 1, Sch. 5 para. 1(1)

7. Where applicable, the [F4 approved] body … (name, number) … performed the F5 ... type-examination (Module B) and issued the F5 ... type-examination certificate … (reference to that certificate). U.K.

Textual Amendments

F4 Word in Annex 9 para. 7 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(52)(d); 2020 c. 1, Sch. 5 para. 1(1)

F5 Word in Annex 9 para. 7 omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(52)(e); 2020 c. 1, Sch. 5 para. 1(1)

8. Where applicable, the PPE is subject to the conformity assessment procedure … (either conformity to type based on internal production control plus supervised product checks at random intervals (Module C2) or conformity to type based on quality assurance of the production process (Module D)) … under surveillance of the [F6 approved] body … (name, number). U.K.

Textual Amendments

F6 Word in Annex 9 para. 8 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(52)(d); 2020 c. 1, Sch. 5 para. 1(1)

9. Additional information: U.K.

Signed for and on behalf of: …

(place and date of issue):

(name, function) (signature):

(1)

It is optional for the manufacturer to assign a number to the declaration of conformity.