1.The EU declaration of conformity shall state that the fulfilment of the essential requirements set out in Annex I has been demonstrated.
2.The EU declaration of conformity shall have the model structure set out in Annex V, shall contain the elements specified in the relevant modules set out in Annex III and shall be continuously updated. It shall be translated into the language or languages required by the Member State in which the appliance or the fitting is placed or made available on the market.
3.In order to assist compliance of finished appliances with the applicable essential requirements set out in Annex I, the EU declaration of conformity for a fitting shall state the characteristics of the fitting and shall contain instructions on how the fitting should be incorporated into an appliance or assembled to constitute an appliance. The EU declaration of conformity shall be in a language which can be easily understood by appliance manufacturers and market surveillance authorities, as determined by the Member State concerned.
4.Where an appliance or a fitting is subject to more than one Union act requiring an EU declaration of conformity, a single EU declaration of conformity shall be drawn up in respect of all such Union acts. That declaration shall contain the identification of the Union acts concerned, including their publication references.
5.By drawing up the EU declaration of conformity, the manufacturer shall assume responsibility for the compliance of the appliance or the fitting with the requirements laid down in this Regulation.
6.A copy of the EU declaration of conformity shall be supplied with the fitting.