- Latest available (Revised)
- Point in Time (24/11/2019)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2017/1153 of 2 June 2017 setting out a methodology for determining the correlation parameters necessary for reflecting the change in the regulatory test procedure and amending Regulation (EU) No 1014/2010 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 24/11/2019.
There are outstanding changes not yet made to Commission Implementing Regulation (EU) 2017/1153. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
1. [F2Manufacturers shall calculate the combined or, where applicable, weighted combined CO 2 emissions, determined as M CO2, measured , for each new passenger car registered in 2020 in accordance with the following equations:
(a) For pure internal combustion engine vehicles:
the equation for calculating M CO2-ind set out in the second subparagraph of paragraph 3.2.3.2.4 of Sub-Annex 7 to Annex XXI to Regulation (EU) 2017/1151, where the terms M CO2-H and M CO2-L shall, for the interpolation family concerned, be replaced by the values M CO2,C,5 (combined) taken from the entries 2.5.1.1.3 (vehicle H) and 2.5.1.2.3 (vehicle L) of the EC type-approval certificate, as indicated in the model set out in Appendix 4 to Annex I to Regulation (EU) 2017/1151;
(b) For Not-Off-Vehicle Charging Hybrid Electric Vehicles (NOVC-HEV):
the equation: M CO2-measured = M CO2-L,C,5 + K ind × (M CO2-H,C,5 – M CO2-L,C,5 )
Where,
is the value M CO2,C,5 (combined) for the interpolation family concerned, taken from entry 2.5.1.2.3 of the EC type-approval certificate as indicated in the model set out in Appendix 4 to Annex I to Regulation (EU) 2017/1151;
is the interpolation coefficient for the considered individual vehicle for the applicable WLTP test cycle as specified in paragraph 4.5.3 of Sub-Annex 8 to Annex XXI to Regulation (EU) 2017/1151;
is the value M CO2,C,5 (combined) for the interpolation family concerned, taken from entry 2.5.1.1.3 of the EC type-approval certificate as indicated in the model set out in Appendix 4 to Annex I to Regulation (EU) 2017/1151.
(c) For Off-Vehicle Charging Hybrid Electric Vehicles (OVC-HEV):
the equation: M CO2-measured = M CO2-L,C,5 + K ind × (M CO2-H,C,5 – M CO2-L,C,5 )
Where,
are, for the interpolation family concerned, determined in accordance with the formula set out in paragraph 4.1.3.1 of Sub-Annex 8 to Annex XXI to Regulation (EU) 2017/1151, where the term M i,CDj shall be replaced by the value M CO2,CD (combined) taken from the entry 2.5.3.2 for vehicle H and L, as applicable, of the EC type-approval certificate, and the term M i,CS shall be replaced by the value M CO2,C,5 (combined) taken from entry 2.5.3.1. of the EC type-approval certificate for vehicle H, L, or M, as applicable;
is the interpolation coefficient for the considered individual vehicle for the applicable WLTP test cycle as defined in paragraph 4.5.3 of Sub-Annex 8 to Annex XXI to Regulation (EU) 2017/1151.]
Where the combined CO 2 emissions of the individual vehicle are determined by reference to vehicle H only, the manufacturers shall provide the M CO2,C,5 value taken from the entry 2.5.1.1.3 (vehicle H) of the EC type approval certificate.
The manufacturers shall submit those CO 2 emission values, together with the M CO2,C,5 values used for the calculation, to the Commission at the latest three months following receipt of the notification by the Commission of the provisional data for 2020 by uploading that data on the manufacturer's account in the Business Data Repository of the European Environment Agency.
[F31a. Where more than one measurement value is recorded in entries 2.5.1.1.3., 2.5.1.2.3., 2.5.3.1 or 2.5.3.2. of an EC type-approval certificate, the M CO2,C,5 or M CO2,CD values referred to in paragraph 1 shall, for the purpose of this provision, be determined as follows:
(a) in the case of one measurement: the combined value recorded for Test 1;
(b) in the case of two measurements: the average of the two combined values recorded for Tests 1 and 2;
(c) in the case of three measurements: the average of the three combined values recorded for Tests 1, 2 and 3.]
2. Where the data referred to in paragraph 1 is not submitted within the deadline indicated, the Commission shall take the value recorded in entry 2.5.1.2.3. of the EC type-approval certificate and consider that value as the combined CO 2 emissions for the purposes of paragraph 1 for all new registered vehicles in the interpolation family for which the type approval certificate was issued, and, where applicable, the value indicated in entry 2.5.1.1.3 for those families where only vehicle H measurements are available.
3. The Commission shall monitor the number of interpolation families for which the CO 2 emissions are determined by reference to vehicle H only for each manufacturer, and shall, in the case of an increase in the number of such families as compared to the situation in 2018, assess the impact of that increase on the calculation referred to in paragraph 1, and where appropriate, exclude those families from that calculation.]
Textual Amendments
F1 Inserted by Commission Implementing Regulation (EU) 2018/2043 of 18 December 2018 amending Implementing Regulation (EU) 2017/1153 to clarify the WLTP test conditions and provide for the monitoring of type approval data (Text with EEA relevance).
F2 Substituted by Commission Implementing Regulation (EU) 2019/1840 of 31 October 2019 amending Implementing Regulation (EU) 2017/1153 as regards the reporting of WLTP CO2 values for certain categories of new passenger cars and adjusting the input data for the correlation tool (Text with EEA relevance).
F3 Inserted by Commission Implementing Regulation (EU) 2019/1840 of 31 October 2019 amending Implementing Regulation (EU) 2017/1153 as regards the reporting of WLTP CO2 values for certain categories of new passenger cars and adjusting the input data for the correlation tool (Text with EEA relevance).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: